The Roman mortars used in the construction of the Ponte di Augusto (Narni, Italy) – A comprehensive assessment
Source abstract
Abstract
Abstract The ruins of the Ponte di Augusto bridge, built in 27 BC close to Narni, have been investigated in recent years in order to assess the seismic resistance of the bridge. The inner structure of the existing pier was surveyed by means of four vertical core drillings, which enabled an assessment of its structural integrity, and provided material samples of its cast mortar masonry. The article presents results of tests that aim to understand the particular function of the mortars that were used. Alongside the macroscopic observations, the following instrumental methods were applied in a study of the extracted material: a macroscopic description of the mortar, thin section optical microscopy, binder SEM–EDS analysis on broken mortar samples, determining the basic physical characteristics, thermal analyses (TGA) and (DTG), and bending and compressive strength testing according to a special methodology for testing very small non-standard specimens. The measured mechanical characteristics (strength and stiffness) vary in a rather large range of values, which may indicate that the cast mortars were not set with suitable technological care. Although it cannot be stated unequivocally that the different compositions of the Ponte di Augusto pier mortars were designed intentionally to take into account changes in the load carrying capacity, from the point of view of the statics of the structure, the strongest mortar was used logically and it was probably also intentionally designed. This strongly interdisciplinary study contributes substantially to our understanding of the work of ancient Roman engineers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Conservation Techniques and Studies · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Cantisani E, Fratini F, Pecchioni E, Rescic S. The piers of the “Ponte di Augusto” (Narni-Italy): the mortars of the wall core. Poster presented at GEOITALIA 2007, Rimini (Italy), September 12–14, 2007.
2. A scale of grade and class terms for clastic sediments10.1086/622910 ↗
3. Comparative investigation of mortars from Roman Colosseum and cistern10.1016/j.tca.2005.03.003 ↗
4. Analytical characterisation of ancient mortars from the archaeological Roman city of Pollentia (Balearic Islands, Spain)10.1016/j.aca.2005.10.058 ↗
5. An investigation of Roman mortar technology through the petrographic analysis of archaeological material10.1016/j.conbuildmat.2007.05.003 ↗
6. Properties of Roman bricks and mortars used in Serapis temple in the city of Pergamon10.1016/j.matchar.2009.04.003 ↗
7. Characterisation of archaeological mortars from Pompeii (Campania, Italy) and identification of construction phases by compositional data analysis10.1016/j.jas.2010.03.019 ↗
8. Mineralogical and microstructural studies of mortars from the bath complex of the Roman villa rustica near Mošnje (Slovenia)10.1016/j.matchar.2011.07.019 ↗
9. Micro-Raman characterizations of Pompeii’s mortars10.1002/jrs.1877 ↗
10. Mortar studies towards the replication of Roman concrete10.1111/j.1475-4754.2009.00450.x ↗
11. Historic mortars: characterisation, assessment, conservation and repair. In: Válek J, Hughes JJ, Groot C, editors. Dordrecht–Heidelberg–New York–London: Springer; 2012.
12. Drdácký MF. Testing of historic mortars on non-standard small size specimens. In: Binda L, Drdácký M, Kasal B, editors. In situ evaluation & non-destructive testing of historic wood and masonry structures, Praha: ÚTAM AV ČR; 2007. p. 130–9.
13. Drdácký M, Mašín D, Mekonone MD, Slížková Z. Compression tests on non-standard historic mortar specimen. In: Book of Abstracts: HMC08 1st historical mortars conference. Lisabon: LNEC; 2008. p. 53 [+CD ROM full paper].
14. Non-standard testing of mechanical characteristics of historic mortars10.1080/15583051003717788 ↗
15. Analysis and restoration of an exterior plaster floor of the 19th century
16. Drdácký M, Slížková Z, O’Hagan JT. Non-standard testing and characterisation of mortars from historic masonry. In: Ingham J, Dhanasekar M, Masia M, editors. Abstracts of the 9th Australasian masonry conference, Queenstown: Univ. of Auckland; 2011. p. 50–50 [full paper on CD, p. 493–502].
17. Le Maitre · 1989
18. The binder of the “Roman Concrete” of the Ponte di Augusto at Narni (Italy)
19. Composite materials in ancient structures10.1016/j.cemconcomp.2004.02.018 ↗
20. Ellis PR. Analysis of mortars by differential thermal analysis. In: Proceedings of international RILEM workshop on historic mortars: characteristics and tests; 1999. p. 133–47.
21. Characterization of ancient, byzantine and later historic mortars by thermal and X-ray diffraction techniques10.1016/0040-6031(95)02571-5 ↗
22. Frankeová D, Slížková Z, Drdácký M. Characteristics of mortars from ancient bridges. In: Válek J, Hughes JJ, Groot C, editors. Historic mortars: characterisation, assessment, conservation and repair, Dordrecht-Heidelberg-New York-London: Springer; 2012. p. 165–74.10.1007/978-94-007-4635-0_13 ↗