Flame-retarding effects and combustion properties of asphalt binder blended with organo montmorillonite and alumina trihydrate
Source abstract
Abstract
Abstract The flame-retarding effects, synergistic effect, and combustion properties of asphalt binder modified with organo montmorillonite (OMMT) and alumina trihydrate (ATH) were investigated on the basis of the limiting oxygen index (LOI) and a combination of thermogravimetry (TG) and Fourier transform infrared spectrometer (FTIR). The results indicated that there existed a synergist flame-retarding effect between OMMT and ATH. Moreover, the flammability of the OMMT/ATH compound was significantly improved as compared to individually adding either OMMT or ATH into base asphalt. Considering the flammability standard and synergy effect, the optimum content of OMMT and ATH was 1% and 3%, respectively. The amount of volatiles released from OMMT/ATH modified asphalt was much less than that from the base asphalt and the thermal stability of OMMT/ATH modified asphalt was superior to that of base asphalt. It is concluded that OMMT/ATH compound may be used as a new kind of environment-friendly flame retardant and smoke suppressant for asphalt binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Flame retardant materials and properties · Fire dynamics and safety research · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures10.1016/S1359-8368(03)00079-9 ↗
2. Performance evaluation of SUPERPAVE and Marshall asphalt mix designs to suite Jordan climatic and traffic conditions10.1016/j.conbuildmat.2006.05.036 ↗
3. Combustion properties of asphalt binder containing flame retardant10.1002/fam.1090 ↗
4. A study on the pyrolysis of asphalt10.1016/S0016-2361(02)00136-9 ↗
5. Flammability and rheological behavior of mixed flame retardant modified asphalt binders10.1016/j.fuel.2007.03.039 ↗
6. Compatibilization of polyethylene/aluminum hydroxide and polyethylene/magnesium hydroxide composites with functionalized polyethylenes10.1016/S0032-3861(02)00856-X ↗
7. Study on combustion mechanism of asphalt binder by using TG-FTIR technique10.1016/j.fuel.2010.01.012 ↗
8. Effects of film thickness, wavelength and carbon black on photodegradation of asphalt10.1627/jpi.48.150 ↗
9. Polymer/layered silicate (clay) nanocomposites: an overview of flame retardance10.1016/j.progpolymsci.2010.03.001 ↗
10. A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials10.1016/j.cemconres.2003.08.025 ↗
11. Evaluation and optimization of the engineering properties of polymer modified asphalt10.1007/BF02719194 ↗
12. Calculating barrier properties of polymer/clay nanocomposites effects of clay layers10.1016/j.polymer.2006.02.069 ↗
13. Enhanced thermal stability and structural characteristics of different MMT-clay/epoxy–nanocomposite materials10.1016/j.polymdegradstab.2007.10.005 ↗
14. High improvement in the properties of exfoliated PU/clay nanocomposites by the alternative swelling process10.1016/j.polymer.2007.03.024 ↗
15. An XPS study of the thermal degradation and flame retardant mechanism of polystyrene-clay nanocomposites10.1016/S0141-3910(02)00055-1 ↗
16. Study of synergists on properties of ATH/EVA nanocomposites
17. Flame retardant properties of EVA-nanocomposites and improvements by combination of nanofillers with aluminium trihydrate10.1002/fam.776 ↗
18. A TGA/FTIR study on thermal degradation of polymethacrylates containing carboxylic groups10.1016/j.polymdegradstab.2006.06.005 ↗
19. A TGA/FTIR and mass spectral study on the thermal degradation of bisphenol A polycarbonate10.1016/j.polymdegradstab.2004.05.009 ↗
20. Pyrolysis of biomass to produce fuels and chemical feedstocks10.1016/S0196-8904(03)00177-8 ↗
21. Flame retardants