journal article·2012-10

Splitting of timber beams loaded perpendicular to grain by connections – Combined effect of edge and end distance

Jørgen L. Jensen, Pierre Quenneville, Ulf Arne Girhammar, Bo Källsner

Publisher page

Abstract

The paper presents experimental results of tests on splitting of laminated veneer lumber beams subjected to loading perpendicular to grain by single bolts with small edge and end distances. Two different edge distances were used, and a total of eight different combinations of edge and end distances were tested. Material properties such as perpendicular-to-grain tensile strength and mode I fracture energy of the tested beams were also determined by testing. The experimental results are compared with a simple analytical model based on quasi-nonlinear fracture mechanics, which takes into account the effect of the edge distance as well as the end distance. A generalized model is proposed, which applies to small and large edge distances and to small and large end distances, and which contains as a special case the linear elastic fracture mechanics model, which is currently used as the basis for calculation of the splitting capacity in the Europeans and Canadian timber design codes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Mechanical Behavior of Composites · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. European committee for standardization (CEN) EN 1995-1-1:2004. Design of Timber Structures. Brussels, Belgium; 2004.
2. Canadian standards association CSA O86–09. Engineering Design in Wood. Toronto, Canada; 2009.
3. van der Put TACM, Leijten AJM. Evaluation of perpendicular to grain failure of beams caused by concentrated loads of joints. In: Proceeding of the International Council for Research and Innovation in Building and Construction, CIB-W18, Meeting Thirty-Three, Delft, The Netherlands; 2000. paper 33-7-7.
4. Splitting strength of beams loaded perpendicular to grain by dowel joints10.1007/s10086-004-0687-2 ↗
5. Moment-resisting bolted timber connections10.1680/stbu.2010.163.4.267 ↗
6. Quasi-non-linear fracture mechanics analysis of splitting failure in moment-resisting dowel joints10.1007/s10086-005-0706-y ↗
7. Fracture perpendicular to grain – structural applications
8. Jensen JL, Gustafsson PJ, Larsen HJ. A tension fracture model for joints with rods or dowels loaded perpendicular to grain. In: Proceeding of the International Council for Research and Innovation in Building and Construction, CIB-W18, Meeting Thirty-Six, Colorado, USA; 2003. paper 36-7-9.
9. Quasi-non-linear fracture mechanics analysis of the splitting failure of single dowel joints loaded perpendicular to grain10.1007/s10086-005-0699-6 ↗
10. Quasi-non-linear fracture mechanics analysis of splitting failure in simply supported beams loaded perpendicular to grain by dowel joints10.1007/s10086-005-0701-3 ↗
11. Comite Europeen de Normalisation (CEN). EN 408 Timber structures – Structural timber and glue laminated timber – Determination of some physical and mechanical properties. Brussels, Belgium; 2003.
12. Yasumura M. Determination of fracture parameter for dowel-type joints loaded perpendicular to wooden grain and its application. In: Proceeding of the International Council for Research and Innovation in Building and Construction, CIB-W18, Meeting Thirty-Five, Kyoto, Japan; 2002. paper 35-7-9.
13. Comite Europeen de Normalisation (CEN). EN 14358 Timber structures – Calculation of characteristic 5-percentile values and acceptance criteria for a sample. Brussels, Belgium; 2006.
14. Jensen JL, Quenneville P. Splitting of beams loaded perpendicular to grain by connections – Some issues with EC5. In: Proceeding of the International Council for Research and Innovation in Building and Construction, CIB-W18, Meeting Forty-Four, Alghero, Italy; 2011.
15. Leijten AJM. Splitting strength of beams loaded by connections – Model comparisons. In: Proceeding of the International Council for Research and Innovation in Building and Construction, CIB-W18, Meeting Thirty-Five, Kyoto, Japan; 2002. paper 35-7-7.
16. Numerical analysis for the prediction of the splitting strength of beams loaded perpendicular-to-grain by dowel-type connections10.1617/s11527-006-9156-2 ↗