journal article·2015-12

Mechanical properties of fiber-reinforced high-performance concrete incorporating pyrogenic nanosilica with different surface areas

Mohammad Hossein Mobini, Alireza Khaloo, Payam Hosseini, Amin Esrafili

Publisher page

Abstract

Abstract The aim of the present study was to investigate the effect of pyrogenic nanosilica with different specific surfaces areas (200 and 380 m 2 /g) on mechanical properties of fiber-reinforced high-performance concrete (FRHPC) produced with two different types of fibers including steel and polypropylene fibers. Accordingly, different mechanical tests (compressive, splitting tensile and flexural strengths) as well as electrical resistivity were performed at 7, 28, and 91 curing days. In addition, the modulus of rupture and flexural toughness of FRHPC prisms were calculated based on the flexural testing results. Also, scanning electron microscopy test (SEM) was conducted to evaluate the microstructural performance of pyrogenic nanosilicas in the matrices of FRHPCs. Results demonstrated that the application of pyrogenic nanosilica can enhance the mechanical and electrical resistivity properties of FRHPC. In addition, the coarser type of pyrogenic nanosilica showed better performance in increasing the mechanical properties of FRHPC than finer one. However, the finer type of pyrogenic nanosilica resulted in higher electrical resistivity in FRHPC specimens compared to coarser nanosilica. Moreover, according to SEM test, the enhancement of mechanical properties of FRHPC in the presence of pyrogenic nanosilicas could be related to the densification of the matrix caused by their particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Combined effect of fine fly ash and packing density on the properties of high performance concrete: An experimental approach10.1016/j.conbuildmat.2014.02.024 ↗
2. Properties of HPC with recycled aggregates10.1016/j.cemconres.2005.11.022 ↗
3. Fracture mechanical properties of high-performance concrete – influence of silica fume10.1007/BF02480535 ↗
4. Use of high performance concrete on rigid pavement construction for exclusive bus lanes10.1016/j.conbuildmat.2009.10.035 ↗
5. Abou-Zeid MN, Fahmy EH and Massoud MT. Interaction of silica fume and polypropylene fibers in high performance concrete. in: Proceedings of the 2nd Material Specialty Conference of the Canadian Society for Civil Engineering, Montréal, Québec, Canada, 2002.
6. Influence of nano-SiO2 addition on microstructure and mechanical properties of cement mortars for ferrocement10.3141/2141-04 ↗
7. An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete10.1016/j.matdes.2013.03.046 ↗
8. Reduction of cement consumption by the aid of silica nano-particles (investigation on concrete properties)10.3846/13923730.2012.698912 ↗
9. Improving the performance of cement-based composites containing superabsorbent polymers by utilization of nano-SiO2 particles10.1016/j.matdes.2012.05.030 ↗
10. Effect of nano-particles and aminosilane interaction on the performances of cement-based composites (An experimental study)10.1016/j.conbuildmat.2014.05.047 ↗
11. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
12. Single and combined effects of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powderson compressive strength and capillary permeability of cement mortar containing silica fume10.1016/j.msea.2011.05.054 ↗
13. Investigating the effects of using different types of SiO2 nanoparticles on the mechanical properties of binary blended concrete10.1016/j.compositesb.2013.04.035 ↗
14. The influence of pyrogenic nanosilicas with different surface areas and aggregation states on cement hydration
15. The influence of different preparation methods on aggregation status of pyrogenic nanosilicas utilized in cement mixtures10.1617/s11527-012-9889-z ↗
16. Synthetic amorphous silica
17. Aqueous suspension of fumed oxides: particle size distribution and zeta potential10.1016/S0001-8686(99)00026-3 ↗
18. ASTM C 150 · 2012
19. ASTM C 33 · 2003
20. ASTM C 1611 · 2009
21. BS EN 12390-3 · 2009
22. ASTM C 496 · 2011
23. ASTM C 78 · 2010
24. JSCE-SF4. Standard for flexural strength and flexural toughness, method of tests for steel fiber reinforced concrete. Concrete library of JSCE, Japan Concrete Institute (JCI); 1984. p. 58–66.
25. ACI 222R-01 · 2001
26. AC impedance spectroscopy (II): microstructural characterization of hydrating cement–silica fume systems10.1016/0008-8846(93)90147-2 ↗
27. Effect of the particle size of nanosilica on the compressive strength and the optimum replacement content of cement mortar containing nano-SiO210.1016/j.conbuildmat.2013.10.002 ↗
28. Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete10.1016/j.conbuildmat.2013.09.032 ↗
29. Use of waste tire steel beads in Portland cement concrete10.1016/j.cemconres.2006.05.015 ↗
30. Use of polymer fibres recovered from waste car timing belts in high performance concrete10.1016/j.conbuildmat.2015.01.011 ↗
31. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
32. SCC modification by use of amorphous nano-silica10.1016/j.cemconcomp.2013.09.001 ↗
33. Mechanical and durability properties of ternary concretes containing silica fume and low reactivity blast furnace slag10.1016/j.cemconcomp.2012.01.007 ↗
34. Chloride transport in concrete subjected to electrical field10.1061/(ASCE)0899-1561(1998)10:4(220) ↗
35. Effect of nanosilica and silica fume content on the bond properties of macro-synthetic fiber in cement-based composites10.1680/macr.12.00036 ↗