Preliminary study on the use of quartz sandstone as a partial replacement of coarse aggregate in concrete based on clay content, morphology and compressive strength of combined gradation
Source abstract
Abstract
Abstract Sandstone is generally composed of grains of quartz and other minerals of fairly uniform size which are often smooth and rounded. These grains are held together by a cementing material which may be siliceous or ferruginous. The toughness of sandstone depends mostly on the nature of this cementing material. While utilising sandstone into concrete, different properties of sandstones has to be studied in detail to know the potential use of sandstone as a part or whole replacement of coarse aggregates. This replacement depends on many factors like mineralogical composition, micro structure, moisture absorption capacity, presence of carbonates and many other parameters. In this study, preliminary tests were analysed for sandstone obtained from Dholpur, eastern most part of Rajasthan state of India. Sandstone waste generation is very much higher in this particular region and it is estimated that Rajasthan alone produces 900 million tons of sandstone waste thus leading to a large dumping of these materials without any particular utilisation. In order to overcome this massive dumping of sandstone wastes and to lessen the use of natural aggregates, a study was carried to find out the effective use of these sandstone wastes in concrete. Tests were done to study the morphology, compressive strength based on combined gradation, clay content percentage and Rietveld curve fitting was done to identify the major constituents in the sandstone aggregate. It was observed that this preliminary study on parent and substitute aggregate was compulsory before replacing the parent aggregate with substitute aggregate. Partial replacement of such aggregates would prevent the usage of natural aggregates which are in the zone of depletion, thus protecting the natural resources and reducing landfilling of mine wastes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. The influence of aggregate type on the strength and elastic modulus of high strength concrete10.1016/j.conbuildmat.2014.08.055 ↗
2. The influence of aggregate type on the strength and abrasion resistance of high strength concrete10.1016/j.cemconcomp.2007.05.011 ↗
3. Influence of aggregate materials characteristics on the drying shrinkage properties of mortar and concrete10.1016/j.conbuildmat.2013.08.069 ↗
4. Influence of the nature of aggregates on the behaviour of concrete subjected to elevated temperature10.1016/j.cemconres.2011.01.005 ↗
5. Modelling the compressive mechanical behaviour of granite and sandstone historical building stones10.1016/j.conbuildmat.2011.08.083 ↗
6. Multi-scale analysis on the influence of moisture on the mechanical behavior of ferruginous sandstone10.1016/j.conbuildmat.2013.12.024 ↗
7. Abrasion resistance of concrete containing marginal aggregates10.1016/j.conbuildmat.2014.05.084 ↗
8. Experimental investigation of size effect in concrete and sandstone under uniaxial tension10.1016/S0013-7944(99)00114-9 ↗
9. Study on microstructure and properties of sandstone cemented by microbe cement10.1016/j.conbuildmat.2012.06.063 ↗
10. The effects of different sandstone aggregates on concrete strength10.1016/j.conbuildmat.2012.04.014 ↗
11. Influence of the use of recycled concrete aggregates from different sources on structural concrete10.1016/j.conbuildmat.2014.08.030 ↗
12. Use of coarse recycled aggregates from precast concrete rejects: mechanical and durability performance10.1016/j.conbuildmat.2014.08.034 ↗
13. Investigation on the flexural behaviour of reinforced concrete beams using phyllite aggregates from mining waste10.1016/j.matdes.2011.05.043 ↗
14. Cyclic loading tests on sandstone and limestone shale aggregates used in unbound forest roads10.1016/j.conbuildmat.2008.10.007 ↗
15. Creep and failure prediction of diestian ferruginous sandstone: modelling and repair options10.1016/j.conbuildmat.2011.10.042 ↗
16. IS: 8112-1989, 43 grade ordinary Portland cement specification, Bureau of Indian Standards, New Delhi, India.
17. IS: 383-1970, Indian Standard Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi, India.
18. ASTM C 29/C 29M, Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate, 2009.
19. IS: 10262-2010, Indian Standard Recommended Guidelines for Concrete Mix Design, Bureau of Indian Standards, New Delhi, India.
20. IS: 1199-1959, Methods of sampling and analysis of concrete, Bureau of Indian Standards (BIS), New Delhi, India.
21. BS EN 933-9, Tests for geometrical properties of aggregates, Assessment of fines. Methylene blue test, British Standard Institute, London, 1999.
22. BS EN 12620:2002+A1, Aggregates for concrete, British Standard Institute, London, 2008.
23. IS: 516-1959, Indian standard Methods of Tests for Strength of concrete, Bureau of Indian Standards, New Delhi, India.
24. Accurate quantitative analysis of clay and other minerals in sandstones by XRD: comparison of a Rietveld and a reference intensity ratio (RIR) method and the importance of sample preparation10.1180/000985500546666 ↗