journal article·2016-05

Testing the effectiveness of protective coatings on traditional bricks

M. Stefanidou, A. Karozou

Publisher page

Abstract

Abstract For millenniums, bricks were the main building material for the load-bearing structural elements of constructions. They were produced manually and they were fired at low temperature. They also present low apparent specific density, high absorption, high surface roughness and relatively low compressive strength. Nowadays, bricks used for restoration works should be compatible to the old ones. As the existing line of modern brick manufacturing is far from the above mentioned criteria, the way to solve the problem is to manually produce these special building materials which render them expensive and laborious. Additionally, their high porosity and soft nature make them easily deteriorated by different environmental conditions. The protection of traditional bricks is an important step towards their durability and a challenge especially nowadays where nanotechnology has been proven efficient when it is incorporated in coatings for building materials. In the present paper, hand-made brick samples were treated with different coatings by the technique of total immersion. The solutions tested were both traditional such as linseed oil but also silanes and alkosiloxanes both neat and nano-modified. In order to compare the physical properties of the treated bricks, parameters like capillarity, porosity, absorption and durability have been tested. It was concluded that silica nano-particles and micro-clay enrichment of alkosiloxane was the most sufficient way to protect those special building materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Conservation Techniques and Studies · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Water permeability vs. porosity in samples of Roman mortars10.1016/j.culher.2004.08.002 ↗
2. Water vapour permeability of clay bricks10.1016/S0950-0618(02)00117-4 ↗
3. Impact of in-pore salt crystallization on transport properties10.1007/s12665-012-2087-z ↗
4. Decay of bricks due to salts10.1007/BF02472994 ↗
5. Stefanidou · 2014 · vol. 47(4)
6. Properties of Roman bricks and mortars used in Serapis temple in the city of Pergamon10.1016/j.matchar.2009.04.003 ↗
7. Characterization of waterproof-covering mortars on Ottoman monuments of ‘‘Ghar El Melh” (Tunisia)10.1016/j.conbuildmat.2007.11.007 ↗
8. The identification of organic additives in traditional lime mortar10.1016/j.culher.2013.04.001 ↗
9. Organic additives in mortars
10. Hydrophobic lime based mortars with linseed oil: characterization and durability assessment10.1016/j.cemconres.2014.03.011 ↗
11. Cechova · 2008
12. Dilemma of green and pseudo green architecture based on LEED norms in case of developing countries10.1016/j.ijsbe.2014.06.003 ↗
13. Clay and man: clay raw materials in the service of man10.1016/0169-1317(95)00029-4 ↗
14. Corrosion protection of steel by epoxy nanocomposite coatings containing various combinations of clay and nanoparticulate zirconia10.1016/j.corsci.2013.05.024 ↗
15. Influence and effectiveness of water-repellent admixtures on pozzolana–lime mortars for restoration application10.1016/j.conbuildmat.2013.08.030 ↗
16. Effectiveness and durability evaluation of rendering mortars made with metallic soaps and powdered silicone10.1016/j.conbuildmat.2007.10.001 ↗
17. Brick and mortar treatment by cream emulsion for improved water repellence and thermal insulation10.1016/j.enbuild.2011.02.014 ↗
18. Producing superhydrophobic coatings for roof tiles
19. Titanium dioxide and zinc oxide nano-particulate enhanced oil-in-water (O/W) facade emulsions for improved masonry thermal insulation and protection10.1016/j.enbuild.2012.05.027 ↗
20. Surface properties of superhydrophobic coatings for stone protection
21. Impregnation and superhydrophobicity of coated porous low-fired clay building materials10.1016/j.porgcoat.2011.03.012 ↗
22. Structure-adsorption properties of ethylene-bridged polysilsesquioxanes and polysiloxanes functionalized with different groups10.1016/j.colsurfa.2009.01.016 ↗
23. Evaluation of the effectiveness of treatment products in improving the quality of ceramics used in new and historical buildings10.1016/j.culher.2012.08.001 ↗
24. Moisture diffusion in and capillary suction of integral water repellent cement based materials
25. Characteristics of bricks used in the domes of some historic baths10.1016/j.culher.2012.11.030 ↗
26. Jean-Pierre · 1994
27. Analysis and characterization of Roman and Byzantine fired bricks from Greece10.1617/s11527-014-0306-7 ↗