Interaction between compressive load and corrosive-ion attack on reinforced concrete with accelerated potentiostatic corrosion
Source abstract
Abstract
The corrosive-cracking behavior of two types of reinforced concrete accelerated by a potentiostat and sustained compressive load was studied. The corrosion-rate function of steel bar in reinforced concrete based on electric-current evolution and the critical-cracking model of reinforced concrete considering the compressive load influence parameter were established. Subsequently, the interaction effects among compressive load, corrosion solutions, and materials on the corrosive cracking of reinforced concrete were proposed. The microstructures of corroded steel bar in seawater and compound solution were observed by SEM. Results showed that under the accelerated potentiostatic condition, there was interaction effect between compressive load and corrosive-ion attack on reinforced concrete. The compressive load had a threshold value for corrosion rate of steel bar and could increase the lateral tensile strength of reinforced concrete. Seawater and compound solution (1% NaCl + 0.5% MgSO4) could result in the increment of the critical compressive load, and decrease the lateral tensile strength of reinforced concrete. (C) 2016 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Hewlett · 2004
2. Cristobal, Methodology to study cost of corrosion10.1179/174327805X75821 ↗
3. Hou · 2012
4. Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site10.1016/j.conbuildmat.2012.07.061 ↗
5. Yu · 2004
6. Corrosive crack and its 3D defects identification of reinforced concrete subjected to coupled effect of chloride ions and sulfate ions10.1016/S1452-3981(23)05018-6 ↗
7. Effect of reinforcement corrosion on bond behavior10.1016/j.proeng.2013.09.038 ↗
8. Durability of concrete exposed to sulfate attack under flexural loading and drying–wetting cycles10.1016/j.conbuildmat.2012.05.033 ↗
9. Effect of chloride salt, freeze–thaw cycling and externally applied load on the performance of the concrete10.1016/S0008-8846(02)00769-X ↗
10. The chemomechanical effect and the mechanochemical effect on high-performance concrete subjected to stress corrosion10.1016/S0008-8846(98)00015-5 ↗
11. Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam10.1016/j.conbuildmat.2013.11.015 ↗
12. Effects of reinforcement configuration and sustained load on the behavior of reinforced concrete beams affected by reinforcing steel corrosion10.1016/j.cemconcomp.2012.07.010 ↗
13. Structural effects of simultaneous loading and reinforcement corrosion on performance of concrete beams10.1016/j.conbuildmat.2012.05.006 ↗
14. Corrosion initiation in cracked fibre reinforced concrete: influence of crack width, fibre type and loading conditions10.1016/j.corsci.2015.05.021 ↗
15. Evaluation of steel corrosion in concrete under simultaneous flexural load and chloride attacks
16. An experimental study on durability of shield segments under load and chloride environment coupling effect10.1016/j.tust.2014.01.004 ↗
17. Effect of axial compressive damage on gas permeability of ordinary and high performance concrete10.1016/S0008-8846(01)00546-4 ↗
18. Microcracking and chloride permeability of concrete under uniaxial compression10.1016/S0958-9465(00)00029-9 ↗
19. Sulfate durability of concretes under constant sustained load10.1016/0008-8846(89)90086-0 ↗
20. The degradation of passive film on carbon steel in concrete pore solution under compressive and tensile stresses10.1016/j.electacta.2011.09.035 ↗
21. Electrochemical study the corrosion behaviour of carbon steel in mortars under compressive and tensile stresses10.1016/j.corsci.2015.11.006 ↗
22. Accelerating tests for the performance deterioration of concrete exposed to chloride media10.1016/j.proeng.2011.12.631 ↗
23. Corrosion of steel reinforcement in concrete of different compressive strengths10.1016/j.conbuildmat.2011.04.023 ↗
24. Effect of moisture variation on oxygen consumption rate of corroding steel in chloride contaminated concrete10.1016/j.cemconcomp.2010.09.014 ↗
25. The effect of mechanical stress on permeability of concrete: a review10.1016/j.cemconcomp.2009.02.003 ↗
26. The co-existence of thaumasite and ettringite in concrete exposed to magnesium sulfate at room temperature and the influence of blast-furnace slag substitution on sulfate resistance10.1016/S0958-9465(03)00152-5 ↗
27. Distribution of mill scale on corroded steel bars and penetration of steel corrosion products in concrete10.1016/j.corsci.2012.09.014 ↗
28. Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars10.1016/j.cemconcomp.2008.03.006 ↗
29. Effect of uniaxial compressive loading on gas permeability and chloride diffusion coefficient of concrete and their relationship10.1016/j.cemconres.2013.05.013 ↗
30. The mechanism of corroded expansion force of reinforced concrete members