Evaluate orthotropic properties of wood using digital image correlation
Source abstract
Abstract
Abstract The goal of this study is to evaluate the orthotropic properties of four different wood species. Off-axis tension tests with digital image correlation were used to evaluate the orthotropic properties of Larix kaempferi , Pinus densiflora , Pinus koraiensis , and Cryptomeria japonica . The highest elastic modulus E L of 11.70 GPa was found from Larix kaempferi , whereas the lowest elastic modulus E R of 0.12 GPa was observed from Cryptomeria japonica . The highest shear modulus G LT of 2.68 GPa was found from Larix kaempferi and the lowest shear modulus G LR of 0.32 GPa was observed from Cryptomeria japonica . While the shear modulus values in the LT plane from the four species were higher, the shear strength values in the LR plane were higher than those in the LR plane. Poisson’s ratios from the four species were found that ν RT and ν TR were higher than ν LR and ν LT . Although mixed failure behaviors were found from the four species, the failure behaviors were dominantly influenced by the orientation of the specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Optical measurement and interference techniques · Surface Roughness and Optical Measurements · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Hearmon · 1961
2. Orthotropic strength of wood in compression
3. Prediction of elastic parameters for wood
4. Plate tests for determination of elastic parameters of wood
5. Measurement of the smaller Poisson’s ratios and related compliances for wood
6. Orthotropic properties of loblolly pine (Pinus taeda) strands10.1007/s10853-010-4658-2 ↗
7. Contact-free measurement and nonlinear finite element analyses of strain distribution along wood adhesive bonds10.1515/HF.2005.103 ↗
8. Transverse anisotropy of compressive failure in European oak – A digital speckle photography study10.1515/HF.2006.031 ↗
9. Measurement of strain distribution in timber finger joints10.1007/s00226-006-0090-9 ↗
10. Tensile properties of earlywood and latewood from loblolly pine (Pinus taeda) using digital image correlation
11. Applying digital image correlation to wood strands: Influence of loading rate and specimen thickness10.1515/hf.2010.110 ↗
12. Elastic constants evaluated from plate tests compared to previous bending tests
13. Ultimate tensile strength of loblolly pine strands using stochastic finite element method10.1007/s10853-009-3518-4 ↗
14. Predicting load carrying capacity of dovetail connection using the stochastic finite element method
15. Mechanical behavior of double-step timber joints10.1016/j.conbuildmat.2010.01.001 ↗
16. Experimental assessment of a full-scale lap scarf timber joint accompanied by a finite element analysis and digital image correlation10.1016/j.conbuildmat.2014.11.034 ↗