Chloride ingress in cracked and uncracked SHCC under cyclic wetting-drying exposure
Source abstract
Abstract
Abstract This paper reports the performance of strain hardening cement-based composite (SHCC) containing polyvinyl alcohol (PVA) fiber under chloride exposure of both cracked and uncracked specimens. The performance of SHCC was also compared to that of an identical mortar mixture without fibers. Three-point bending was applied to mechanically induce cracks in both reinforced SHCC and mortar specimens. Cracks were also formed in unreinforced SHCC specimens, whereas cracks were not formed in the unreinforced mortar specimens because of its brittle behavior. Thereafter, specimens were subjected to cyclic and continuous chloride attack for defined time periods. Both total and free chloride in SHCC and mortar specimens were then determined by means of X-ray florescence (XRF) and chemical analysis according to RILEM recommendations. Rapid chloride migration tests were also performed to determine the chloride migration coefficient in both SHCC and mortar. The results confirm that the mechanically-induced cracks in the SHCC specimens lead to higher chloride migration than in uncracked SHCC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Broomfield · 2007
2. A novel method for describing chloride ion transport due to an electrical gradient in concrete. Part 1. Theoretical description10.1016/S0008-8846(03)00191-1 ↗
3. Tang · 1996
4. Concentration dependence of diffusion and migration of chloride ions. Part 1. Theoretical considerations10.1016/S0008-8846(99)00121-0 ↗
5. Concentration dependence of diffusion and migration of chloride ions. Part 2. Experimental evaluations10.1016/S0008-8846(99)00120-9 ↗
6. Influence of the applied voltage on the rapid chloride migration (RCM) test10.1016/j.cemconres.2012.04.007 ↗
7. The apparent and effective chloride migration coefficients obtained in migration tests10.1016/j.cemconres.2013.02.005 ↗
8. Rapid determination of the chloride diffusivity in concrete by applying an electrical field
9. Steady-state diffusion characteristics of cementitious materials
10. Effects of metakaolin and the interfacial transition zone on the diffusion of chloride ions through cement mortars10.1016/S0008-8846(01)00598-1 ↗
11. Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars10.1016/j.cemconcomp.2009.03.001 ↗
12. Water permeability of engineered cementitious composites10.1016/j.cemconcomp.2009.07.002 ↗
13. Aspects of durability of strain hardening cement-based composites under imposed strain
14. Capillary absorption and chloride penetration in neat and water repellent SHCC under imposed strain
15. Influence of traversing crack on chloride diffusion into concrete10.1016/j.cemconres.2007.10.007 ↗
16. The effect of cracks on chloride penetration into concrete10.4028/www.scientific.net/KEM.348-349.769 ↗
17. Tutti · 1982
18. Tensile strain-hardening behaviour of polyvinyl alcohol engineered cementitious composite (PVA-ECC)
19. 2011
20. Mechanically induced cracking behaviour in fine and coarse sand strain hardening cement based composites (SHCC) at different load levels10.3151/jact.11.301 ↗
21. Durability against steel corrosion of HPFRCC with bending cracks10.3151/jact.11.135 ↗
22. Corrosion protection performance of high performance fiber reinforced cement composites as a repair material10.1016/j.cemconcomp.2010.03.005 ↗
23. Corrosion of reinforcing steel in fibre reinforced cementitious composites10.3151/jact.9.159 ↗
24. Transport properties of engineered cementitious composite under chloride exposure
25. Testing and modelling chloride penetration in concrete. Analysis of total chloride content in concrete10.1617/13840 ↗
26. Testing and modelling chloride penetration in concrete. Analysis of water soluble chloride content in concrete10.1617/13841 ↗
27. B.A.W. Merkblatt, Chlorideindringwiderstand von Beton (MCL) in German, 2004.
28. NT Build 492 · 1999
29. Crack formation and chloride induced corrosion in reinforced strain hardening cement-based composite (R/SHCC)10.3151/jact.12.340 ↗
30. Chloride ingress in cracked concrete: a laser induced breakdown spectroscopy (LIBS) study
31. A new approach for modelling the ingress of deleterious materials in cracked strain hardening cement-based composites
32. A.M. Neville, Properties of Concrete, 4th ed. Pearson, London, 1996.
33. Hong · 1998
34. Use of polypropylene fibres to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure
35. The presentation of the chloride threshold level for corrosion of steel in concrete10.1016/S0010-938X(97)00009-7 ↗
36. A study of the effect of chloride binding on service life predictions10.1016/S0008-8846(00)00339-2 ↗
37. Relationship between free chloride and total chloride contents in concrete10.1016/S0008-8846(03)00065-6 ↗
38. Studies of chloride binding in concrete exposed in a marine environment10.1016/S0008-8846(98)00191-4 ↗
39. Relationship between the free and total chloride diffusivity in concrete10.1016/S0008-8846(01)00664-0 ↗
40. Evaluation of chloride content in concrete by X-ray fluorescence10.1016/S0008-8846(97)00108-7 ↗
41. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
42. Observation and quantification of water penetration into strain hardening cement-based composite (SHCC) with multiple cracks by means of neutron radiography10.1016/j.nima.2010.04.119 ↗
43. Evaluation of the AgNO3 solution spray method for measurement of chloride penetration into hardened cementitious matrix materials10.1016/0950-0618(93)90002-T ↗