Heating effects of asphalt pavement during hot in-place recycling using DEM
Source abstract
Abstract
Abstract A discrete element thermal analysis model was established to evaluate the heating effects of asphalt pavement during hot in-place recycling (HIR) using discrete element method (DEM). Influences of two different heating methods on the heating effects of asphalt pavement during HIR were analyzed, and numerical simulation results were validated with measured results on the test section of entity project. The results indicated that the one-way continuous heating method (OCHM) leaded to an obvious temperature hysteresis at the lower part of heated pavement layer. It was difficult for the lower part to synchronously reach the highest temperature like the upper part of heated pavement layer. However, the temperature of heated pavement layer was integrally elevated using another reciprocating intermittent heating method (RIHM), improving the bulk temperature and its distribution homogeneity in the upper pavement layer. This was beneficial to spiking up and milling of the heated pavement layer during HIR. Similarly, measured results on entity project showed that the temperatures at different depths in the upper layer were increased uniformly using RIHM, and the pavement surface temperature was also lowered to reduce the aging or charring of asphalt binder. Finally, numerical simulation results were basically consistent with the measured results on entity project. It is concluded that the DEM can be used to evaluate the heating effects of asphalt pavement and further optimize the heating scheme during HIR, improving the construction quality of recycled asphalt pavement when the boundary conditions and reasonable assumptions of discrete element model are fully considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Evaluation of the diffusion and distribution of the rejuvenator for hot asphalt recycling10.1016/j.conbuildmat.2015.08.135 ↗
2. Are totally recycled hot mix asphalts a sustainable alternative for road paving?10.1016/j.resconrec.2011.11.013 ↗
3. Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates10.1016/j.jclepro.2015.03.069 ↗
4. Performance characterization of hot in-place recycled asphalt mixtures10.1061/(ASCE)TE.1943-5436.0000679 ↗
5. Performance of hot in-place recycled Superpave mixtures in Florida10.1016/j.conbuildmat.2013.08.043 ↗
6. Experimental study and discrete element method modeling of temperature distributions in rapeseed stored in a model bin10.1016/j.jspr.2014.03.009 ↗
7. Advances in micromechanical constitutive theories and modeling in asphalt mixture: a review10.1016/j.sbspro.2013.08.148 ↗
8. Modeling of transient temperature distribution in multilayer asphalt pavement10.12989/gae.2015.8.2.133 ↗
9. An FEM-predictive tool for simulating the cooling characteristics of freshly paved asphalt concrete layers10.1080/10298436.2014.937714 ↗
10. Numerical finite element formulation of the 3D linear viscoelastic material model: complex Poisson’s ratio of bituminous mixtures10.1016/j.acme.2015.02.003 ↗
11. Fatigue life prediction of an asphalt pavement subjected to multiple axle loadings with viscoelastic FEM10.1016/j.conbuildmat.2013.02.017 ↗
12. Numerical simulation of indirect tensile test based on the microstructure of asphalt mixture10.1061/(ASCE)MT.1943-5533.0000037 ↗
13. Discrete Element Method for the thermal field: proof of concept and determination of the material parameters10.1016/j.commatsci.2011.04.028 ↗
14. Review on advances in modeling and simulation of stone-based paving materials10.1016/j.conbuildmat.2013.02.043 ↗
15. Discrete element modeling of asphalt concrete: microfabric approach10.3141/1757-13 ↗
16. 3D discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure10.1080/10298436.2010.489114 ↗
17. Micromechanical characteristics of aggregate particles in asphalt mixtures10.1016/j.conbuildmat.2015.05.076 ↗
18. Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method10.1016/j.conbuildmat.2015.08.116 ↗
19. Three-dimensional discrete element modeling of asphalt concrete: size effects of elements10.1016/j.conbuildmat.2012.08.007 ↗
20. Discrete element modelling of influences of grain shape and angularity on performance of granular mixes for asphalts10.1016/j.sbspro.2012.09.891 ↗
21. Air void effect on an idealised asphalt mixture using two-dimensional and three-dimensional discrete element modelling approach10.1080/10298436.2010.488737 ↗
22. A discrete element method study on the evolution of thermomechanics of a pebble bed experiencing pebble failure10.1016/j.fusengdes.2014.04.066 ↗
23. A combined finite-discrete element method for calculating the effective thermal conductivity of bio-aggregates based materials10.1016/j.ijheatmasstransfer.2013.01.002 ↗
24. Three-dimensional simulation using fixed coarse-grid thermal-fluid scheme and conduction heat transfer scheme in distinct element method10.1016/j.powtec.2006.04.003 ↗
25. Thermal DEM–CFD modeling and simulation of heat transfer through packed bed10.1016/j.powtec.2013.04.013 ↗
26. A homogenization technique for heat transfer in periodic granular materials10.1016/j.apt.2011.01.002 ↗
27. DEM simulation and analysis of particle mixing and heat conduction in a rotating drum10.1016/j.ces.2013.04.005 ↗
28. A DEM study on the effective thermal conductivity of granular assemblies10.1016/j.powtec.2010.09.008 ↗
29. Temperature-dependent viscoelastic model for asphalt concrete using discrete rheological representation10.1016/j.conbuildmat.2015.05.106 ↗
30. PFC 2D simulation of thermally induced cracks in concrete specimens
31. The feasibility of DEM to analyze the temperature field of asphalt mixture10.1016/j.conbuildmat.2015.12.192 ↗
32. Discrete fracture modeling of asphalt concrete10.1016/j.ijsolstr.2009.02.006 ↗
33. Three-dimensional discrete element models for asphalt mixtures
34. Discrete element analysis of the influences of aggregate properties and internal structure on fracture in asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000005 ↗