Response of oil palm shell concrete slabs subjected to quasi-static and blast loads
Source abstract
Abstract
A series of quasi-static and blast tests was conducted to investigate resistance capacity of concrete slabs in which conventional crushed granite aggregates were wholly replaced with oil palm shell (OPS) as a coarse aggregate. A control specimen using Normal Concrete (NC) using conventional aggregate of similar strength was also prepared and tested for comparison. Two types of OPS concrete (OPSC) slabs were developed-with and without steel fibres (SF) and tested. LVDTs, pressure transducers and accelerometers were used to record data of response of the slabs subjected to quasi-static load and blast loads of 1, 5 and 10 kg TNT. The recorded data were then analysed and compared and conclusions were made on the effectiveness of OPS as a coarse aggregate. It has been found that OPSC outperformed NC slab when subjected to 10 kg TNT as the ductile OPSC panel was intact and had no shrapnels. Through the ductility behaviour of OPSC, it exhibited multiple cracks and the impact resistance of OPS through its energy absorption due to fibrous content within OPS itself was visible both in crack pattern and in its propagation. Though OPS is of organic nature, its resistance to blast waves was observed as the huge fire ball created due to blast had no or little effect on the OPSC panels. The OPS Fibre Reinforced Concrete (OPSFRC) also exhibited blast resistance characteristics, but uneven distribution of fibres and harsh mix with 3% of steel fibres resulted in larger crack width and fibre pull-out failure. Overall, the behaviour of OPSC in blast resistance characteristics is noteworthy and further tests are required to envisage the use of appropriate fibre content in OPSC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Response of normal-strength and ultra-high-performance fiber-reinforced concrete columns to idealized blast loads10.1016/j.engstruct.2014.01.015 ↗
2. Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash10.1016/j.conbuildmat.2012.08.003 ↗
3. Experimental field investigation of impact and blast load resistance of Ultra High Performance Fibre Reinforced Cementitious Composites (UHPFRCCs)10.1016/j.conbuildmat.2015.07.141 ↗
4. Air blast resistance of full-scale slabs with different compositions: numerical modeling and field validation10.1016/j.ijimpeng.2015.08.004 ↗
5. Performance based investigation on the construction of anti-blast water wall10.1016/j.ijimpeng.2015.03.003 ↗
6. Residual axial capacity of CFDST columns infilled with UHPFRC after close-range blast loading10.1016/j.tws.2015.08.020 ↗
7. Energy absorption of graded foam subjected to blast: a theoretical approach10.1016/j.matdes.2015.06.124 ↗
8. A new method for progressive collapse analysis of RC frames under blast loading10.1016/j.engstruct.2010.02.017 ↗
9. Palm oil shell aggregate for lightweight concrete. Waste materials used in concrete manufacturing
10. Mix design for oil palm shell concrete10.1016/S0008-8846(01)00585-3 ↗
11. Shear strength of oil palm shell foamed concrete beams10.1016/j.matdes.2008.09.024 ↗
12. Enhancement of mechanical properties in polypropylene– and nylon–fibre reinforced oil palm shell concrete10.1016/j.matdes.2013.02.070 ↗
13. Short-term and long-term projection of Malaysian palm oil production
14. Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete
15. Effect of aggregate size and proportion on strength properties of palm kernel shell concrete
16. A comparison of the thermal conductivity of oil palm shell foamed concrete with conventional materials10.1016/j.matdes.2013.04.078 ↗
17. Shear behaviour of reinforced palm kernel shell concrete beams10.1016/j.conbuildmat.2010.12.032 ↗
18. Effect of fibre aspect ratio on the torsional behaviour of steel fibre-reinforced normal weight concrete and lightweight concrete10.1016/j.engstruct.2015.07.007 ↗
19. Influence of fiber reinforcement on strength and toughness of all-lightweight concrete10.1016/j.conbuildmat.2014.07.074 ↗
20. Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability10.1016/j.cemconres.2004.07.035 ↗
21. Quality improvement of oil palm shell (OPS) as coarse aggregate in lightweight concrete10.1016/j.buildenv.2005.05.018 ↗
22. Utilization of oil palm kernel shell as lightweight aggregate in concrete – a review10.1016/j.conbuildmat.2012.08.026 ↗
23. Enhancement and prediction of modulus of elasticity of palm kernel shell concrete10.1016/j.matdes.2010.11.035 ↗
24. Flexural behaviour of reinforced lightweight concrete beams made with oil palm shell (OPS)10.3151/jact.4.459 ↗
25. Flexural toughness characteristics of steel–polypropylene hybrid fibre-reinforced oil palm shell concrete10.1016/j.matdes.2014.01.004 ↗
26. Impact resistance of hybrid fibre-reinforced oil palm shell concrete10.1016/j.conbuildmat.2013.10.016 ↗
27. Ductility behaviour of reinforced palm kernel shell concrete beams
28. Shock-absorbing capability of lightweight concrete utilizing volcanic pumice aggregate10.1016/j.conbuildmat.2015.03.019 ↗
29. Polystyrene aggregate concrete subjected to hard impact
30. The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete10.1016/j.conbuildmat.2013.12.103 ↗
31. Torsional and cracking characteristics of steel fiber-reinforced oil palm shell lightweight concrete
32. Flexural toughness characteristics of steel-polypropylene hybrid fibre-reinforced oil palm shell concrete.
33. Blast testing of ultra-high performance fibre and FRP retrofitted concrete slabs10.1016/j.engstruct.2009.03.020 ↗
34. UFC 3-340-02
35. Investigation of air-blast effects from spherical and cylindrical shaped charges10.1260/2041-4196.1.3.345 ↗
36. Critical scaled distances of spherical vs cylindrical charge shape effects for external, fully vented confined and fully confined blasts