Acoustic emission investigation of the mechanical performance of carbon nanotube-modified cement-based mortars
Source abstract
Abstract
Abstract Concrete’s inherent brittleness, low tensile strength and premature micro-cracking phenomena can be improved by embedment, in the bulk material, of carbon nanotubes (CNT), the 1-D allotrope of carbon exhibiting a remarkable combination of mechanical and transport properties. The present study reports on the flexural and compressive mechanical performance of mortars reinforced with variable loadings of multi-walled carbon nanotubes. Four point bending tests were performed with simultaneous in situ monitoring of the acoustic emission (AE) activity of the mortars, a technique herein applied for the first time in nanotube-reinforced cement, and the data were used to evaluate the efficiency of the non-destructive method in assessing the sensitivity of the mortars’ properties on tube loading. A CNT concentration of 0.4% relative to cement mass, was found related to optimal improvements in flexural strength. Impressively, two key AE descriptors, namely average frequency and the rise time over amplitude ratio were independently found to simultaneously maximize at the same tube loading while their temporal variation revealed a transition in the material’s fracture mode with tube loading. Complications due air entrapment in the materials facilitated by nanotube presence are discussed in the text and a viable resolution is suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites10.1016/j.conbuildmat.2012.04.086 ↗
2. Acoustic emission behavior of steel fibre reinforced concrete under bending10.1016/j.conbuildmat.2009.06.042 ↗
3. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
4. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
5. Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements10.1038/nnano.2008.211 ↗
6. Effect of carbon nanotubes on properties of cement mortars10.1016/j.conbuildmat.2013.09.019 ↗
7. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
8. Distribution of carbon nanofibers and nanotubes in cementitious composites10.3141/2142-13 ↗
9. Mechanical properties and durability of CNT cement composites10.3390/ma7031640 ↗
10. Optimization of sonication parameters for homogeneous surfactant-assisted dispersion of multiwalled carbon nanotubes in aqueous solutions10.1021/acs.jpcc.5b01349 ↗
11. Carbon nanotube/cement composites – early results and potential applications
12. Experimental study on compressive strength of Cement-CNT composite paste
13. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume10.1016/j.compstruct.2013.07.042 ↗
14. The influences of admixtures on the dispersion, workability, and strength of carbon nanotube–OPC paste mixtures10.1016/j.cemconcomp.2011.09.013 ↗
15. Influence of carbon nanotubes structure on the mechanical behavior of cement composites10.1016/j.compscitech.2009.05.002 ↗
16. Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites10.1680/adcr.2008.20.2.65 ↗
17. Carbon nanofiber/clinker hybrid material as a highly efficient modificator of mortar mechanical properties
18. Electrical resistance of carbon-nanofiber concrete10.1088/0964-1726/18/9/095039 ↗
19. Review of nanocarbon-engineered multifunctional cementitious composites10.1016/j.compositesa.2014.12.002 ↗
20. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
21. The influence of multi-walled carbon nanotubes additive on properties of non-autoclaved and autoclaved aerated concretes10.1016/j.conbuildmat.2013.08.044 ↗
22. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials10.1016/j.apsusc.2010.09.030 ↗
23. Compressive strength and microstructure of carbon nanotubes–fly ash cement composites10.1016/j.msea.2009.09.039 ↗
24. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
25. Stress drop and stress redistribution in concrete quantified over time by the b-value analysis10.1177/1475921706057983 ↗
26. Acoustic emission and ultrasound for damage characterization of concrete elements
27. Localization and classification of fracture types in concrete with quantitative acoustic emission measurement techniques10.1016/S0963-8695(96)00060-6 ↗
28. Influence of fly ash and curing on cracking behavior of concrete by acoustic emission technique10.1016/j.conbuildmat.2013.03.041 ↗
29. Phenomenological model of corrosion process in reinforced concrete identified by acoustic emission
30. Fracture mechanism characterization of cross-ply carbon-fiber composites using acoustic emission analysis10.1016/S0963-8695(99)00030-4 ↗
31. Acoustic emission monitoring of degradation of cross ply laminates10.1121/1.3425752 ↗
32. Acoustic emission characterization of the fracture process in fibre reinforced concrete10.1016/j.conbuildmat.2011.04.049 ↗
33. Detection and evaluation of AE waves due to rock deformation10.1016/S0950-0618(00)00073-8 ↗
34. Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete∗10.1617/s11527-010-9639-z ↗
35. An experimental study on acoustic emission energy as a quantitative measure of size independent specific fracture energy of concrete beams10.1016/j.conbuildmat.2010.11.033 ↗
36. Shah · 1989
37. Acoustic emission measurements of fracture energy