An investigation on alkali-activated fly ash pastes modified with quartz powder subjected to elevated temperatures
Source abstract
Abstract
Abstract In this study, the opportunity of employing quartz powder (QP) to improve the workability as well as the compressive strength of alkali-activated fly ash (AAFA) pastes before and after exposure to thermal loads has been investigated. Fly ash (FA) was partially substituted with QP at percentages ranging from 0% to 30% with an interval of 5%, by weight. After curing, specimens were exposed to different thermal loads ranging from 400 °C to 1000 °C with a step of 200 °C with a heating rate of 6.67 °C/min for 2 h. Weight and compressive strength of the investigated specimens before and after being heating were exhaustively conducted. The different decomposition phases formed upon exposure to thermal loads were detected using X-ray diffraction (XRD) and thermogravimetric (TGA) techniques. The microstructure of the formed hydration products was determined by scanning electron microscopy (SEM). The results showed that the workability as well as compressive strength before and after firing improved by increasing QP content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Alkali-activated metakaolin: a short guide for Civil Engineer – an overview10.1016/j.conbuildmat.2012.12.030 ↗
2. A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – a guide for Civil Engineer10.1016/j.conbuildmat.2013.04.011 ↗
3. A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash10.1016/j.matdes.2013.07.074 ↗
4. H. Kȕhl, Slag cement and process of making the same, US Patent 900,939, 1908.
5. Shi · 2006
6. Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue?10.1016/j.conbuildmat.2011.12.017 ↗
7. Geopolymer concrete: a review of some recent developments10.1016/j.conbuildmat.2015.03.036 ↗
8. A brief on high-volume Class F fly ash as cement replacement – a guide for Civil Engineer10.1016/j.ijsbe.2015.10.002 ↗
9. Thermal behavior of geopolymers prepared using class F fly ash and elevated temperature curing10.1016/j.cemconres.2006.03.022 ↗
10. The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load10.1016/j.conbuildmat.2010.12.044 ↗
11. 16 – The fire resistance of alkali-activated cement-based concrete binders
12. Mechanical performance of fly-ash-based green geopolymer composites subjected to elevated temperatures10.14233/ajchem.2014.18146 ↗
13. New cementitious materials based on alkali-activated fly ash: performance at high temperatures10.1111/j.1551-2916.2008.02625.x ↗
14. Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperature10.1016/j.cemconres.2007.08.021 ↗
15. Strategies to control the high temperature shrinkage of fly ash based geopolymers10.1016/j.tca.2014.01.020 ↗
16. The influence of calcium content on the structure and thermal performance of fly ash based geopolymers10.1007/s10853-006-0532-7 ↗
17. Fiber reinforced geopolymers for fire resistance applications10.1016/j.proeng.2014.04.022 ↗
18. Development of metakaolin-fly ash based geopolymers for fire resistance applications10.1016/j.conbuildmat.2014.01.040 ↗
19. Potential use of phosphogypsum in alkali-activated fly ash under the effects of elevated temperatures and thermal shock cycles10.1016/j.jclepro.2014.09.080 ↗
20. An exploratory study on sodium sulphate-activated slag blended with Portland cement under the effect of thermal loads10.1007/s10973-014-4345-7 ↗
21. An investigation on blast-furnace slag as fine aggregate in alkali-activated slag mortars subjected to elevated temperatures10.1016/j.jclepro.2015.07.127 ↗
22. Influence of the activator concentration of sodium silicate on the thermal properties of alkali-activated slag pastes10.1016/j.conbuildmat.2015.11.023 ↗
23. An exploratory study on alkali-activated slag blended with quartz powder under the effect of thermal cyclic loads and thermal shock cycles10.1016/j.conbuildmat.2014.06.097 ↗
24. Highly flowable reactive powder mortar as a repair material10.1016/j.conbuildmat.2007.03.009 ↗
25. A preliminary study of autoclaved alkali-activated slag blended with quartz powder10.1016/j.conbuildmat.2011.12.104 ↗
26. A preliminary study of blended pastes of cement and quartz powder under the effect of elevated temperature10.1016/j.conbuildmat.2011.10.006 ↗
27. A preliminary study of alkali-activated slag blended with silica fume under the effect of thermal loads and thermal shock cycles10.1016/j.conbuildmat.2012.10.014 ↗
28. Effect of GGBFS on setting, workability and early strength of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
29. Grinding and pozzolanic reactivity of quartz powders10.1016/S0032-5910(99)00133-3 ↗
30. The influence of particle size on the pozzolanic reactivity of quartz powder10.1016/S0032-5910(99)00010-8 ↗
31. The effect of pore-treatment on the thermal performance of fly ash geopolymers10.1016/j.tca.2013.09.030 ↗
32. Thermally induced microstructural changes in fly ash geopolymers: experimental results and proposed model10.1111/jace.13370 ↗
33. Factors influencing softening temperature and hot-strength of geopolymers10.1016/j.cemconcomp.2011.09.019 ↗
34. Effect of Si/Al ratio on performance of fly ash geopolymers at elevated temperature10.1007/s13369-012-0230-5 ↗
35. High-pressure phase transition of mullite under shock compression10.1063/1.1794904 ↗
36. Sintering and characterization of mullite alumina composites10.1016/0272-8842(86)90018-0 ↗
37. The effect of mullite on the mechanical properties and thermal shock behavior of alumina-mullite refractory materials10.1016/S0272-8842(02)00103-7 ↗
38. Structure and properties of mullite – a review10.1016/j.jeurceramsoc.2007.03.017 ↗
39. Changes in quartz during heating and the possible effects on Si production10.1007/s11837-014-1149-y ↗
40. Effect of transient creep on compressive strength of geopolymer concrete for elevated temperature exposure10.1016/j.cemconres.2013.11.014 ↗
41. Alkali activation of biomass fly ash-metakaolin blends10.1016/j.fuel.2012.04.006 ↗
42. Alkaline activation of metakaolin-fly ash mixtures: obtain of zeoceramics and zeocements10.1016/j.micromeso.2007.03.024 ↗
43. Thermal evolution of metakaolin geopolymers: Part 1 – physical evolution
44. Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire10.1016/j.cemconcomp.2013.09.002 ↗
45. Physical evolution of Na-geopolymer derived from metakaolin up to 1000°C10.1007/s10853-006-0535-4 ↗
46. Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition10.1016/j.jnoncrysol.2012.05.032 ↗
47. Production of nepheline/quartz ceramics from geopolymer mortars10.1016/j.jeurceramsoc.2012.08.022 ↗
48. Mechanical properties of hardened cement paste exposed to elevated temperatures up to 700°C
49. Fly ash porous material using geopolymerization process for high temperature exposure10.3390/ijms13044388 ↗
50. An exploratory study on alkali-activated slag paste blended with micro metakaolin subjected to thermal loads