journal article·2016-10

Experimental investigation into the use of NSM FRP to increase the torsional resistance of RC beams using epoxy resins and cement-based adhesives

G. Al-Bayati, R. Al-Mahaidi, R. Kalfat

Publisher page

Abstract

Abstract Carbon fibre-reinforced polymers (CFRPs) have been used to increase the strength of reinforced concrete (RC) members using both externally bonded reinforcement (EBR) and near surface mounted (NSM) techniques with a great deal of success. However, currently no studies have been conducted on torsional strengthening using NSM methods as current research on torsional strengthening has been conducted using EBR techniques only. It is well documented that flexure and shear strength of RC beams has been improved using NSM strengthening technology applied with epoxy adhesives. However, due to epoxy adhesive problems associated with toxic fumes and poor performance in high-temperature environments, a new cement-based adhesive has been developed and used as an alternative to epoxy in several studies. This paper reports on experimental results of ten RC beams tested in torsion using a specialized torsional rig system. Two control beams were considered and eight beams strengthened with CFRP laminates applied to all four faces of the beam and embedded into pre-cut grooves using the NSM technique were prepared. An epoxy adhesive was used in four beams and a new cement-based adhesive was used as a substitute for epoxy in the remaining four beams. For each type of adhesive, two different spacings between the grooves were examined. The performances and the ultimate strengths of the beams are presented and the results expressed in terms of the maximum torsional capacity with respect to the peak angle of twist. According to the results, the torsional behaviour of the beams was improved in the strengthened beams to varying degrees when using epoxy resin as the bonding agent. On the other hand, the NSM technique with the cement-based adhesive was also an effective method in increasing the torsional strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Irwin · 2002
2. Fib Bulletin 14 · 2001
3. An experimental investigation on torsional behaviour of solid and box-section RC beams strengthened with CFRP using photogrammetry10.1061/(ASCE)1090-0268(2006)10:4(321) ↗
4. Shear strengthening of reinforced concrete beams with near-surface mounted fiber-reinforced polymer rods
5. An experimental and numerical investigation on torsional strengthening of RC beams using CFRP composites10.1016/j.compstruct.2006.04.050 ↗
6. Analytical method for evaluating ultimate torque of FRP strengthened reinforced concrete beams10.1061/(ASCE)1090-0268(2007)11:4(384) ↗
7. Improving torsional behaviour of reinforced concrete beams strengthened with carbon fibre reinforced polymer composite
8. Shear strengthening of a PC bridge girder with NSM CFRP rectangular bars10.1260/1369433041653570 ↗
9. Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures
10. Near-surface mounted CFRP laminates for shear strengthening of concrete beams10.1016/j.cemconcomp.2005.11.003 ↗
11. R. El-Hacha, M. Wagner, Shear strengthening of reinforced concrete beams using near-surface mounted CFRP strips, in: Proceedings of the FRPRCS-9 International Conference, 13–15 July 2009, Sydney, Australia (2009).
12. Shear behaviour of RC beams strengthened with NSM and EB CFRP strips10.1680/macr.2010.62.3.211 ↗
13. Performance of CFRP strengthened concrete members under elevated temperatures
14. Wiberg · 2003
15. Investigation of bond strength and flexural behaviour of FRP-strengthened reinforced concrete beams using cement-based adhesives10.1080/13287982.2010.11465061 ↗
16. Experimental and finite element analysis of flexural behavior of FRP-strengthened RC beams using cement-based adhesives10.1016/j.conbuildmat.2011.06.021 ↗
17. Al-Abdwais · 2013
18. Al-Abdwais · 2015
19. Australian-Standards-for-Concrete-Structures, Standards Australia, North Sydney, NSW AS3600-2009, 2009.
20. A.K.Y. Hii, R. Al-Mahaidi, Torsional strengthening of reinforced concrete beams using CFRP composites, in: FRP Composites in Civil Engineering-CICE 2004, 2004, pp. 551–559.10.1201/9780203970850.ch61 ↗
21. G. Al-Bayati, R. Al-Mahaidi, Effective bond length of modified cement-based adhesive for FRP-NSM strengthening system, in: S.T. Smith (Ed.), 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23) Byron Bay, Australia, 9–12 December 2014, 2014, pp. 389–396.
22. ASTM A370-10 · 2010
23. AS 1012.9 · 1999
24. AS 1012.10, Methods of Testing Concrete – Determination of Indirect Tensile Strength of Concrete Cylinders (Brasil or Splitting Test), 2000.
25. Hii · 2006
26. American Concrete Institute (ACI) · 2005
27. Design of concrete flexural members strengthened in shear with FRP10.1061/(ASCE)1090-0268(2000)4:4(198) ↗
28. Torsional capacity of CFRP strengthened reinforced concrete beams10.1061/(ASCE)1090-0268(2007)11:1(71) ↗