Pozzolanic Index and lime requirement of low calcium fly ashes in high volume fly ash mortar
Source abstract
Abstract
The major drawback for High Volume Fly Ash Concrete (HVFAC) is low strength development. It is because of the production of less lime by the hydration due to less cement present. However, the exact amount of the lime required for HVFAC system is an unsolved problem so far due to the complexity of hydration and pozzolanic reactions. This paper presents the application of the theory of a logical Pozzolanic Index proposed by Dunstan R Edwin in 2006 for three fly ashes of different chemical and physical properties. Based on the procedure used to find the Strength Activity Index proposed by ASTM C 618, an experimental analysis is conducted on mortar compressive strength, whose results are used to determine the Pozzolanic Index. Thereby calculates the required lime for each replacement of cement with fly ash ranging from 0 to 80% for the three fly ashes. It also concludes that the finer the fly ash the more reactive and consumes more lime at certain age of concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. E. Dunstan, How Does Pozzolanic Reaction Make Concrete “Green”, in: World of Coal Ash (WOCA) Conference-May 9–12, 2011. pp. 1–14.
2. Influence of quicklime addition on the mechanical properties and hydration degree of blended cements containing different fly ashes10.1016/j.conbuildmat.2007.02.001 ↗
3. Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash10.1016/j.cemconres.2010.11.014 ↗
4. Properties of fly ash concrete modified with hydrated lime and silica fume10.1016/j.conbuildmat.2009.06.001 ↗
5. M. Solikin, High performance concrete with high volume ultra fine fly ash reinforced with Basalt fibre, 2012.
6. Pozzolana and pozzolanic cements10.1016/B978-075066256-7/50022-9 ↗
7. ASTM-C-618-03, “Standard specification for fly ash and raw calcined natural pozzolan for use as mineral admixture in Portland cement concrete” C-618, Annual Book of ASTM Standard, West Conshohocken, PA, US, 2003.
8. A logical pozzolanic index and its use in concrete proportioning10.1520/JAI13416 ↗
9. AS 3582.1, Supplementary cementitious materials for use with Portland and blended cement – Fly ash, Standards Australia, 1998.
10. ASTM C33-03, Standard Specification for Concrete Aggregates, Annual Book of ASTM Standard, West Conshohocken, PA, US, 2003.
11. ASTM C 311-07, Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA, 2007.
12. ASTM C 1437, Standard test for determination of flow of hydraulic cement mortar, in determination of flow, West Conshohocken, PA, 2013.
13. AS 1012.9 1999. Method 9: Determination of the compressive strength of concrete specimens. Strathfield, Australia, Australian Standard Committee.
14. ASTM C109/C109M-02 2002. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). Philadelphia, United States, Annual Book of ASTM Standards.
15. Studies of the physical properties of hardened Portland cement paste