journal article·2017-01

Hydration kinetics, freeze-thaw resistance, leaching behavior of blended cement containing co-combustion ash of sewage sludge and rice husk

Teng Wang, Yongjie Xue, Min Zhou, Yi Lv, Yuchi Chen, Shaopeng Wu, Haobo Hou

Publisher page

Abstract

Abstract The application of co-combustion of sewage sludge together with rice husk is expected to increase in the coming years because of the economic and environmental benefits. Hence, resources of massive residues from co-combustion process deserve particular attention. In this study, cementitious materials that are composed of co-combustion ash, H (co-combustion of 20% sewage sludge + 80% rice husk) or W (co-combustion of 30% sewage sludge + 70% rice husk), were developed. Hydration characteristics, mechanical properties, freeze-thaw (F-T) durability, and environmental performance were investigated. Results show that the cumulative hydration heat increases along with the increase in the amount of amorphous SiO 2 in blended cement. The inclusion of H and W inhibits hydration at the early hydration stage and decreases the diffusion coefficient of paste at the later hydration stage. Moreover, the addition of H or W reduces the unconfined compressive strength (UCS) of sample at an early age. However, the UCS for 7-day and 28-day specimens even exceeds that of the reference. Blended cement containing co-combustion ash possesses leach resistance and poor frost resistance. Meanwhile, a significant increase of leached heavy metals is generated after F-T cycle. This phenomenon is a negative environmental impact of F-T action.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A review of methods for the thermal utilization of sewage sludge: the polish perspective10.1016/j.renene.2010.01.019 ↗
2. Durability study of a sewage sludge-cement-sand system and its environmental impact
3. Properties of stabilized/solidified admixtures of cement and sewage sludge10.1016/j.cemconcomp.2006.08.005 ↗
4. Stabilisation and solidification of sewage sludges with Portland cement10.1016/S0008-8846(00)00363-X ↗
5. Emission characteristics of PM10 during sewage sludge combustion
6. Analysis of the combustion and pyrolysis of dried sewage sludge by TGA and MS10.1016/j.wasman.2013.10.033 ↗
7. Effect of drying temperature on the fuel value of wastewater sludge10.1177/0734242X9601400208 ↗
8. Leaching of ashes from co-combustion of sewage sludge and wood—Part I: Recovery of phosphorus10.1016/j.biombioe.2007.09.016 ↗
9. Co-combustion of coal and sewage sludge: chemical and ecotoxicological properties of ashes
10. The study of partitioning of heavy metals during fluidized bed combustion of sewage sludge and coal10.1115/1.2126988 ↗
11. Heavy metals behavior during monocombustion and co-combustion of sewage sludge10.1089/ees.2005.22.205 ↗
12. The pozzolanic properties of paper sludge waste10.1016/j.conbuildmat.2007.03.033 ↗
13. Pozzolanic activity of various siliceous materials10.1016/j.cemconres.2004.06.025 ↗
14. Influence of the fineness of sewage sludge ash on the mortar properties10.1016/S0008-8846(03)00165-0 ↗
15. The combined benefits of CPF and RHA in improving the durability of concrete structures10.1016/S0958-9465(01)00055-5 ↗
16. High-performance concrete incorporating rice husk ash as a supplementary cementing material
17. Factors affecting hazardous waste solidification/stabilization: a review10.1016/j.jhazmat.2006.01.065 ↗
18. Freeze–thaw resistance and chloride-ion penetration of cement-stabilized clay exposed to sulfate attack10.1016/j.clay.2015.07.041 ↗
19. Freezing and thawing resistance of aerial lime mortar with metakaolin and a traditional water-repellent admixture10.1016/j.conbuildmat.2016.04.029 ↗
20. Assessment of strength development and freeze–thaw performance of cement treated clays at different water contents10.1016/j.coldregions.2014.12.008 ↗
21. Properties of magnesium phosphate cement containing redispersible polymer powder10.1016/j.conbuildmat.2016.03.053 ↗
22. Quantitative determination of phases in the alkali activation of fly ash. Part I. Potential ash reactivity10.1016/j.fuel.2005.08.014 ↗
23. Quantitative determination of phases in the alkaline activation of fly ash. Part II: Degree of reaction10.1016/j.fuel.2006.04.006 ↗
24. The behavior of inorganic material in biomass-fired power boilers: field and laboratory experiences10.1016/S0378-3820(97)00060-X ↗
25. Evaluation of the toxicity characteristic leaching procedure (TCLP) on utility wastes10.1016/0191-815X(88)90029-0 ↗
26. Comparison of fly ash leaching methods10.1016/j.fuel.2008.11.013 ↗
27. Hydration heat evolution and kinetics of blended cement containing steel slag at different temperatures10.1016/j.tca.2015.02.018 ↗
28. Effect of w/c and temperature on the early-stage hydration heat development in Portland-limestone cement10.1016/j.conbuildmat.2013.09.020 ↗
29. Production of rice husk ash for use in concrete as a supplementary cementitious material10.1016/j.conbuildmat.2010.07.003 ↗
30. Microstructure and reactivity of rich husk ash10.1016/j.conbuildmat.2011.11.005 ↗
31. The role of silica fume in the kinetics and mechanisms during the early stage of cement hydration10.1016/S0008-8846(00)00374-4 ↗
32. Behaviour of ordinary Portland cement during the stabilization/solidification of synthetic heavy metal sludge: macroscopic and microscopic aspects10.1016/S0956-053X(98)00003-8 ↗
33. Ettringite-induced swelling in soils: state-of-the-art10.1115/1.3005046 ↗
34. Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials10.1016/j.cemconres.2007.04.003 ↗
35. H.F.W. Taylor, Cement Chemistry, Chemistry for Engineers, 1997, 134.10.1680/cc.25929 ↗
36. Early hydration of tricalcium silicate
37. Thermodynamic considerations on the hydration mechanisms of tricalcium silicate and tricalcium aluminate10.1016/0008-8846(72)90039-7 ↗
38. Effect of lime on hydration of pastes containing gypsum and calcium aluminates or calcium sulfoaluminate10.1111/j.1151-2916.1973.tb12503.x ↗
39. A conceptual model of the cement hydration process10.1016/S0008-8846(00)00231-3 ↗
40. A new approach to modeling the nucleation and growth kinetics of tricalcium silicate hydration10.1111/j.1551-2916.2007.01858.x ↗
41. Modeling and simulation of cement hydration kinetics and microstructure development10.1016/j.cemconres.2010.10.004 ↗
42. Impact of admixtures on the hydration kinetics of Portland cement10.1016/j.cemconres.2011.03.005 ↗
43. Simulation of the exothermic hydration process of Portland cement10.1680/adcr.2002.14.2.61 ↗
44. Strength, leachability and microstructure characteristics of cement-based solidified plating sludge10.1016/j.cemconres.2004.07.041 ↗
45. Managing trace elements in Portland cement – Part I: Interactions between cement paste and heavy metals added during mixing as soluble salts10.1016/j.cemconcomp.2010.06.002 ↗
46. Effect of freeze–thaw cycling on the mechanical properties of lime-stabilized expansive clays10.1016/j.coldregions.2015.08.008 ↗
47. Effect of water during freeze–thaw cycles on the performance and durability of lime treated gypseous soil10.1016/j.coldregions.2015.12.008 ↗
48. Resistance of chemically-activated high phosphorous slag content cement against freeze–thaw cycles10.1016/j.coldregions.2014.03.012 ↗