journal article·2017-03

Mechanical properties of FRP-strengthened concrete at elevated temperature

Yue Li, Xiongfei Liu, Miaoke Wu

Publisher page

Abstract

Abstract This paper aims to illuminate the effects of elevated temperature on mechanical properties of fiber reinforced plastic (FRP) strengthened concrete glued by modified epoxy resin (MER) adhesive. Tensile strength, flexural strength and interface bonding properties of FRP-MER-concrete (C30 and C50) were measured after exposure to 80, 160 and 240 °C for 1.5 h and 3 h, respectively. Microstructures of the interface were analyzed by scanning electron microscope (SEM). The ultimate tensile strength and strain of MER-FRP, and bonding strength of FRP-concrete interface gradually decrease as exposure temperature and time increase. The ultimate capacity of FRP-strengthened concrete gradually decreases. The loss rates of ultimate capacity and fracture energy of high-strength specimens are greater than those of low-strength specimens. The fracture energy loss of FRP-strengthened concrete is more sensitive to temperature than to exposure time. The stress-strain relationship of FRP follows a bilinear behavior for both types of concrete. Micro-cracks in MER-concrete interface and concrete matrix degrade the mechanical properties of FRP-strengthened concrete at elevated temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures
2. CSA S806-02 · 2002
3. ISIS Canada · 2001
4. Technical Report 55 · 2000
5. High temperature residual properties of externally-bonded FRP systems
6. Effect of elevated service temperature on bond between FRP EBR systems and concrete10.1016/j.compositesb.2008.06.004 ↗
7. Shear tests of steel plates epoxy bonded to concrete under temperature10.1061/(ASCE)0899-1561(2000)12:1(74) ↗
8. Behavior of FRP-strengthened concrete after high temperature exposure10.1016/j.conbuildmat.2010.06.103 ↗
9. Effect of elevated temperatures on a fiber composite used to strengthen concrete columns10.1177/0731684403022010002 ↗
10. Investigation of insulated FRP-wrapped reinforced concrete columns in fire10.1016/j.firesaf.2006.10.007 ↗
11. Capillary tension theory for prediction of early autogenous shrinkage of self-consolidating concrete10.1016/j.conbuildmat.2013.12.010 ↗
12. Toughening of cycloaliphatic epoxy resin by nanosize silicon dioxide10.1016/j.matlet.2006.04.023 ↗
13. Toughness improvement of epoxy resin mortar by incorporation of ground calcium carbonate10.1016/j.conbuildmat.2015.09.054 ↗
14. Standard A. D638-08. Standard Test Method for Tensile Properties of Plastics, 2008.
15. Experimental study of retrofitted cracked concrete with FRP and nanomodified epoxy resin
16. Bond properties of FRP-concrete interface with nano-modified epoxy resin under wet-dry cycles
17. Standard A. D3039M-08. Standard test method for tensile properties of polymer matrix composite materials. Annual Book of ASTM Standards, 2008.
18. ASTM D4541-09 · 2009
19. Structural behaviour of RC beams with external flexural and flexural–shear strengthening by FRP sheets10.1016/j.compositesb.2012.02.018 ↗
20. Flexural behavior of corroded pretensioned girders repaired with CFRP sheets10.15554/pcij.03012014.129.143 ↗
21. Behavior and modeling of concrete confined with FRP composites of large deformability10.1061/(ASCE)CC.1943-5614.0000230 ↗
22. Effect of different photoinitiators and reducing agents on cure efficiency and color stability of resin-based composites using different LED wavelengths10.1016/j.jdent.2015.08.015 ↗
23. Bakis · 1993
24. Tensile strength of concrete
25. Buchanan · 2001 · Vol. 273
26. Plain concrete cylinders and beams externally strengthened with natural flax fabric reinforced epoxy composites