journal article·2017-09

Elevated temperature mechanical properties of solid section structural steel

Martin Neuenschwander, Markus Knobloch, Mario Fontana

Publisher page

Abstract

Abstract In structural fire design thick solid steel sections are often used for steel columns without fire protection or more recently in innovative composite column systems as for example concrete-filled steel tube columns with solid steel core. The data in the literature on the mechanical properties of commercially available solid section mild carbon steel used in structural fire engineering is scarce and limited to investigations at ambient temperature, showing high inhomogeneity in the yield strength between peripheral and core material, especially in the as hot-rolled condition. This paper presents the results of an extensive series of closed-loop strain-rate controlled tensile tests, performed at elevated temperatures of 400, 475, 550, 626, 700 and 900 °C under steady-state conditions and at ambient temperature with coupon specimens of core and peripheral material of commercially available mild carbon steel from round solid sections of various diameters. The resulting temperature-dependent relations for the yield strength and ultimate tensile strength (1) indicate for normalised small sections and as hot-rolled thick sections only a moderate difference between core and peripheral material that vanishes with increasing temperatures, and (2) can be predicted reasonably well by the European and North American design code models for structural steels at elevated temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Thermal and structural response of concrete-filled tubular columns with massive steel core in case of fire10.1002/bate.201500003 ↗
2. ISO Standard fire tests of concrete-filled steel tube columns with solid steel core10.1061/(ASCE)ST.1943-541X.0001695 ↗
3. Modeling thermo-mechanical behavior of concrete-filled steel tube columns with solid steel core subjected to fire10.1016/j.engstruct.2017.01.017 ↗
4. Suitability of the damage-plasticity modelling concept for concrete at elevated temperatures: experimental validation with uniaxial cyclic compression tests10.1016/j.cemconres.2015.07.013 ↗
5. Generic model stress–strain relationship for concrete in compression at elevated temperatures
6. K. Kordina, W. Klingsch, Fire resistance of composite columns and of solid steel columns, Research report, Project 35, European Coal and Steel Community, Brussels, Belgium, 1983, Part 1, pp. 181–203 (in German).
7. Fire resistance of solid steel columns10.1016/0379-7112(81)90026-6 ↗
8. Rechnerische Analyse von Walzeigenspannungen
9. CEN (European Committee for Standardization), Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels, prEN 10025–2, Brussels, Belgium, 2011.
10. CEN (European Committee for Standardization), Eurocode 3: Design of steel structures – Part 1–2: General rules – Structural fire design, EN 1993-1-2, Brussels, Belgium, 2010.
11. Modelling steel behaviour10.1016/0379-7112(88)90029-X ↗
12. High temperature properties of hot-rolled structural steels for use in fire engineering design studies10.1016/0379-7112(88)90030-6 ↗
13. Fire design model for structural steel S355 based upon transient state tensile test results10.1016/S0143-974X(97)00018-7 ↗
14. Mechanical properties of structural steel at elevated temperatures and after cooling down10.1002/fam.849 ↗
15. Examination of the mechanical properties of the microalloyed grain refined S460 at elevated temperatures10.1002/bate.200710061 ↗
16. Deterioration of mechanical properties of high strength structural steel S460N under transient state fire condition10.1016/j.matdes.2012.04.028 ↗
17. Poh · 1998
18. Influence of the strain-rate on the mechanical properties of mild carbon steel at elevated temperatures10.1016/j.matdes.2013.01.021 ↗
19. High-temperature properties of steel for fire resistance modelling of structures10.1061/(ASCE)MT.1943-5533.0000041 ↗
20. Behavior of high strength structural steel at elevated temperatures10.1061/(ASCE)0733-9445(2006)132:12(1948) ↗
21. Deterioration of mechanical properties of high strength structural steel S460N under steady state fire condition10.1016/j.matdes.2011.11.069 ↗
22. Experimental study of the mechanical properties of light gauge cold-formed steels at elevated temperatures10.1016/j.firesaf.2008.06.006 ↗
23. Bhadeshia · 2006
24. An introduction to the mechanical properties of structural steel at elevated temperatures10.1016/0379-7112(88)90032-X ↗
25. 1992
26. The effects of strain-ageing due to interstitial solutes on the mechanical properties of metals10.1179/095066071790137928 ↗
27. J. Glen, An experimental study of the strength and ductility of steel at elevated temperatures, in: Symp. on Strength and Ductility of Metals at Elevated Temperatures, ASTM Spec. Techn. Publ. 128, 1953, pp. 184–221.10.1520/STP41690S ↗
28. Effect of alloying elements on the high-temperature tensile strength of normalized low-carbon steel
29. Effects of manganese and nitrogen on the tensile properties of iron in the range 20–600°C
30. Effect of dynamic strain aging on mechanical properties of vanadium microalloyed steel10.1179/026708303225001984 ↗
31. Dynamic strain aging effects in niobium microalloyed steel10.1179/030192302225004575 ↗
32. The effect of heat treatment on high temperature mechanical properties of microalloyed medium carbon steel10.1016/j.matdes.2005.01.020 ↗
33. L. Twilt, Stress–strain relationships of structural steel at elevated temperatures: Analysis of various options & European proposal. ECSC project SA 112 – Part F: mechanical properties, TNO-Report BI-91-015, Netherlands Organisation for Applied Scientific Research (TNO), Delft, Netherlands, 1991.
34. T.Z. Harmathy, W.W. Stanzak, Elevated-temperature tensile and creep properties of some structural and prestressing steels, in: Fire Test Performance, ASTM Spec. Techn. Publ. 464, 1970, pp. 186–208.10.1520/STP44718S ↗