Flexural strength of weathered granites: Influence of freeze and thaw cycles
Source abstract
Abstract
The effect of freeze-thaw cycles (FTC) on the flexural strength of granite panels is investigated in this paper. Specimens from three different types of Australian granite were sampled. Fifteen specimens were used as control (unweathered) specimens while another 36 specimens were subjected to accelerated weathering consisting of 100 FTC over a period of 34 days. A controlled freeze-thaw chamber and a temperature range between −10 °C and +70 °C was used for this purpose. Ultrasonic pulse velocity (UPV) of the specimens was measured before and after FTC testing. Flexural strength tests were conducted after the FTC were completed. Results showed that thin granite veneers suffered physical degradation accompanied by a noticeable reduction in UPV, density and flexural strength following FTC. Correlation between flexural strength and UPV and between unweathered and weathered UPV is proposed for the three types of Australian granite used in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Blackwell · 2005
2. Implications of exposure to high temperatures for stone cladding requirements of three Portuguese granites regarding the use of dowel-hole anchoring systems10.1016/j.conbuildmat.2014.03.035 ↗
3. Laboratory investigations on the mechanical properties degradation of granite under freeze-thaw cycles10.1016/j.coldregions.2011.05.007 ↗
4. Influence of freeze-thaw cycles on mechanical properties of historical brick masonry10.1016/j.conbuildmat.2015.03.077 ↗
5. Assessing damage of reinforced concrete beam using “b-value” analysis of acoustic emission signals10.1061/(ASCE)0899-1561(2003)15:3(280) ↗
6. Non invasive measurements of moisture in full-scale stone and brick masonry models after simulated flooding: effectiveness of GPR
7. Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networks10.1016/j.ultras.2008.05.001 ↗
8. Laboratory measurement of ultrasound velocity during accelerated aging tests: Implication for the determination of limestone durability10.1016/j.conbuildmat.2012.06.029 ↗
9. New contributions to granite characterization by ultrasonic testing10.1016/j.ultras.2013.06.006 ↗
10. Ultrasonic evaluation of the physical and mechanical properties of granites10.1016/j.ultras.2008.03.008 ↗
11. Experimental characterization of granite damage using nonlinear ultrasonic techniques10.1016/j.ndteint.2014.06.005 ↗
12. Nondestructive testing evaluation of drying process in flooded full-scale masonry walls10.1061/(ASCE)CF.1943-5509.0000097 ↗
13. Artificial weathering of stone by heating10.1016/j.culher.2012.11.026 ↗
14. ASTM.D5312/D5312M-12. Standard test method for evaluation of durability of rock erosion control under freezing and thawing conditions. American Society for Testing and Materials, 2016.
15. EN.12371. Natural stone test methods – Determination of frost resistance. European Standard, 2010.
16. Predicting the frost resistance of building stone10.1144/1470-9236/04-068 ↗
17. Physical weathering of building stones induced by freeze–thaw action: a laboratory long-term study10.1007/s12665-010-0826-6 ↗
18. The effects of freeze–thaw cycles on the gloss values of polished stone surfaces10.1016/j.coldregions.2012.05.007 ↗
19. Damage in granite under heating/cooling cycles and water freeze–thaw condition10.1016/j.ijrmms.2008.01.002 ↗
20. Effects of cyclic freezing and thawing on mechanical properties of Qinghai-Tibet clay10.1016/j.coldregions.2006.09.008 ↗
21. ASTM.C880/C880M-15. Standard test method for flexural strength of dimension stone. American Society for Testing and Materials, 2015.
22. ASTM.D2845-05. Standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. American Society for Testing and Materials, 2005.
23. Ultrasonic pulse velocity for the evaluation of physical and mechanical properties of a highly porous building limestone10.1016/j.ultras.2015.02.010 ↗