journal article·2017-12

Effect of saline admixtures on mechanical and microstructural properties of cementitious matrices containing tailings

Babak Koohestani

Publisher page

Abstract

Abstract The addition of silane coupling agents as an additive in cement-based materials provides several technical, operational, and economic advantages such as a reduction in the amount of water to cement ratio and an improvement in flow behavior. In this study, we used mine tailings as the sole source of fine aggregates along with two different silane agents, namely methyl-trimethoxy silane or MTMS as a water repellent and dispersing agent and tetraethyl-orthosilicate or TEOS as the precursor of nano-silica. Based on the achieved results, the addition of 1% MTMS decreased the water requirement of cement and tailings mixture up to 25% for a specific slump height while the strength acquisition was mainly under the influence of MTMS rather than TEOS. The addition of these silane agents to the cementitious matrix containing tailings improved the matrix densification by filling influence of fine pores and formation of new sources of hydrated cement minerals such as C-S-H gels as discussed in differential thermogravimetric, mercury intrusion porosimetry, infrared spectroscopy, and scanning electron microscopy sections.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tailings Management and Properties · Concrete and Cement Materials Research · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO210.1016/j.cemconres.2005.07.004 ↗
2. Beneficial role of nanosilica in cement based materials – a review10.1016/j.conbuildmat.2013.05.052 ↗
3. Effect of Zinc oxide and Al-Zinc oxide nanoparticles on the rheological properties of cement paste10.1016/j.compositesb.2016.08.040 ↗
4. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
5. Mineralogical evolution of Portland cement blended with silica nanoparticles and its effect on mechanical strength10.1016/j.conbuildmat.2012.06.043 ↗
6. Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica10.1016/j.conbuildmat.2014.02.039 ↗
7. Flores-Vivian I, Pradoto RGK, Moini M, Sobolev K. The use of nanoparticles to improve the performance of concrete.
8. Surface-activated nanosilica treated with silane coupling agents/polypropylene composites: mechanical, morphological, and thermal studies10.1002/pc.21190 ↗
9. Niederberger · 2009
10. K. Sobolev, I. Flores, R. Hermosillo, L.M. Torres-Martínez, Nanomaterials and nanotechnology for high-performance cement composites. Proceedings of ACI Session on Nanotechnology of Concrete: Recent Developments and Future Perspectives, Denver, USA. 2006.
11. Experimental investigation into the compressive strength development of cemented paste backfill containing Nano-silica10.1016/j.cemconcomp.2016.06.016 ↗
12. Fine patterning and characterization of gel films derived from methyltriethoxysilane and tetraethoxysilane10.1111/j.1151-2916.1998.tb02705.x ↗
13. Synthesis of biocompatible hydrophobic silica–gelatin nano-hybrid by sol–gel process10.1016/j.colsurfb.2006.11.008 ↗
14. Superhydrophobic silica aerogels based on methyltrimethoxysilane precursor10.1016/j.jnoncrysol.2003.08.048 ↗
15. Bioconjugate techniques: elsevier
16. The influence of aminosilanes on macroscopic properties of cement paste10.1016/j.cemconres.2008.02.006 ↗
17. Organic–inorganic hybrid melting gels10.1007/s10971-010-2219-4 ↗
18. Effects of surface properties of colloidal silica particles on redispersibility and properties of acrylic-based polyurethane/silica composites10.1016/j.jcis.2004.08.100 ↗
19. Transparent inorganic/organic copolymers by the sol-gel process: thermal behavior of copolymers of tetraethyl orthosilicate (TEOS), vinyl triethoxysilane (VTES) and (meth) acrylate monomers10.1007/BF00487723 ↗
20. Lottermoser · 2010
21. Effects of silane modified minerals on mechanical, microstructural, thermal, and rheological properties of wood plastic composites
22. Evaluation of paste backfill mixtures consisting of sulphide-rich mill tailings and varying cement contents10.1016/j.cemconres.2004.01.018 ↗
23. Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfill10.1016/j.matlet.2005.06.042 ↗
24. Utilization of gold tailings as an additive in Portland cement10.1177/0734242X06064358 ↗
25. Paste backfill of high-sulphide mill tailings using alkali-activated blast furnace slag: effect of activator nature, concentration and slag properties10.1016/j.mineng.2015.08.022 ↗
26. Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented paste backfill of sulphide-rich tailings10.1016/j.conbuildmat.2015.06.042 ↗
27. Modeling of pressure on retaining structures for underground fill mass10.1016/j.tust.2017.06.010 ↗
28. Use of high-density paste bacfill for safe disposal of copper/zinc mine tailings
29. Effects of tailings and binder geochemistry on the physical strength of paste backfill
30. Effect of tailings fineness on the pore structure development of cemented paste backfill10.1016/j.conbuildmat.2016.09.052 ↗
31. Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler10.1016/j.conbuildmat.2016.05.118 ↗
32. Curing time effect on consolidation behaviour of cemented paste backfill containing different cement types and contents10.1016/j.conbuildmat.2014.11.008 ↗
33. Effect of desliming of sulphide-rich mill tailings on the long-term strength of cemented paste backfill10.1016/j.jenvman.2012.11.014 ↗
34. The influence of silanes on hydration and strength development of cementitious systems10.1016/j.cemconres.2014.10.008 ↗
35. Predicting the uniaxial compressive strength of cemented paste backfill from ultrasonic pulse velocity test10.1080/10589759.2015.1111891 ↗
36. The use of thermal analysis in assessing the effect of temperature on a cement paste10.1016/j.cemconres.2004.06.015 ↗
37. Ö. Cizer, Competition between carbonation and hydration on the hardening of calcium hydroxide and calcium silicate binders: Katholieke Universiteit Leuven; 2009.
38. Characteristics of blended cements containing nano-silica10.1016/j.hbrcj.2013.09.001 ↗
39. Carbonation of portland cement studied by diffuse reflection fourier transform infrared spectroscopy10.1007/s40069-013-0039-y ↗
40. P.J. Launer, Infrared analysis of organosilicon compounds: spectra-structure correlations. Silicone compounds register and review, 1987, 100.
41. The influence of water-repellent admixtures on the behaviour and the effectiveness of Portland limestone cement mortars10.1016/j.cemconcomp.2015.02.004 ↗
42. Microstructural control and hydration of novel micro-dendritic clinkers with CaO/SiO 2= 1.410.1016/j.cemconres.2015.06.004 ↗
43. Effect of alkalis on fresh C-S–H gels, FTIR analysis10.1016/j.cemconres.2009.01.003 ↗