Changes in color and thermal properties of fly ash cement mortar after heat treatment
Source abstract
Abstract
Abstract Fly ash (FA) is a powdery substance discharged by power plants after burning coal or other fossil raw materials. The storage and reuse of FA have been under debate since the release of FA into the atmosphere could be detrimental to human health. Fortunately, FA has been mostly collected by plants, and these large amounts of collected FA have led to its reuse, which not only reduces pollution, but FA can be also used in lieu of other materials, such as cement, for environmentally friendly building materials. However, the properties of building materials will undergo deterioration at high temperatures. Therefore, in this study, the influence of heat treatment at high temperatures on FA cement mortar is examined in relation to the color and thermal conductivity changes. Color changes are an apparent indicator, for example, of the variation in moisture content. Thermal conductivity ( λ ) is an important parameter for evaluating the heat transport properties of materials. Mass loss and density also affect thermal conductivity. In this study, 15 FA cement mortar samples are made from mixtures that contain 3 different FA replacement percentages: 10%, 20% and 40%, for a total of 45 samples. The samples undergo heat treatment at temperatures that range from room temperature to 800 °C before testing is carried out. A color meter and a thermal conductivity tester are used to obtain the color parameters L∗, a∗, b∗ and thermal conductivity, respectively. The samples are also sprayed with a phenolphthalein reagent after treatment to qualitatively observe the changes in pH. It is found that a temperature range of 400–600 °C is critical in which the pH of the mortar decreases due to carbonization and the decomposition of calcium hydroxide, which lead reduced lifespan of the FA cement mortar. The thermal conductivity also decreases at higher temperatures, and is linearly correlated with the density ratio. The experimental results show that the FA percentage has a considerable influence and therefore, there could be an optimum FA percentage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Production of sustainable clay bricks using waste fly ash: mechanical and durability properties10.1016/j.jobe.2017.09.008 ↗
2. Use of fly ash in production of light-weight building bricks10.1016/j.conbuildmat.2015.07.029 ↗
3. Use of coal ash as geopolymer binder and coarse aggregate in pervious concrete10.1016/j.conbuildmat.2015.08.076 ↗
4. Use of solid residue from thermal power plant (fly ash) for enhancing sewage sludge anaerobic digestion: influence of fly ash particle size10.1016/j.biortech.2017.07.159 ↗
5. Effects of key factors of rotary triboelectrostatic separator on efficiency of fly ash decarbonization10.1016/j.ijmst.2017.06.004 ↗
6. Green coal mining technique integrating mining-dressing-gas draining-backfilling-mining10.1016/j.ijmst.2016.11.014 ↗
7. A review on the human health impact of airborne particulate matter10.1016/j.envint.2014.10.005 ↗
8. High calcium fly ash geopolymer mortar containing Portland cement for use as repair material10.1016/j.conbuildmat.2015.08.139 ↗
9. Fly ash-based geopolymer: clean production, properties and applications10.1016/j.jclepro.2016.03.019 ↗
10. Influence of mineral admixtures on thermal conductivity and compressive strength of mortar10.1016/S0378-7788(02)00052-X ↗
11. Mechanical strength and microstructure evolution of fly ash cement mortar submerged in pig slurry10.1016/j.cemconres.2007.09.021 ↗
12. Physical properties and mechanical behaviour of concrete made with recycled aggregates and fly ash10.1016/j.conbuildmat.2013.04.051 ↗
13. Porous thermal insulation materials derived from fly ash using a foaming and slip casting method10.1016/j.enbuild.2014.06.028 ↗
14. Mechanical properties and durability performance of reinforced concrete containing fly ash10.1016/j.conbuildmat.2015.10.127 ↗
15. Valorization of co-combustion fly ash in concrete production10.1016/j.matdes.2015.07.079 ↗
16. Massive volume fly-ash concrete: a more sustainable material with fly ash replacing cement and aggregates10.1016/j.cemconcomp.2015.08.001 ↗
17. Mechanical properties of concrete mortar based on mixture of CRT glass cullet and fluidized fly ash10.1016/j.proeng.2015.06.170 ↗
18. The effect of heat-curing on transport properties of low-calcium fly ash-based geopolymer concrete10.1016/j.conbuildmat.2016.02.210 ↗
19. Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement10.1016/j.conbuildmat.2016.04.080 ↗
20. The effect of fly ash, β-cyclodextrin and fly ash-β-cyclodextrin composites on concrete workability and strength10.1016/j.cemconcomp.2016.12.008 ↗
21. Mudali, Strength and durability studies of fly ash concrete in sea water environments compared with normal and superplasticizer concrete10.1007/s12205-016-0272-4 ↗
22. Influence of fly ash on compressive strength and micro-characteristics of magnesium potassium phosphate cement mortars10.1016/j.cemconres.2017.05.008 ↗
23. Mechanical properties and microstructure of class C fly ash-based geopolymer paste and mortar10.3390/ma6041485 ↗
24. Experimental investigation of the compressive and tensile strengths of geopolymer mortar: the effect of sand/fly ash (S/FA) ratio10.1016/j.conbuildmat.2016.10.030 ↗
25. Compressive strength, bending and fracture characteristics of high calcium fly ash geopolymer mortar containing portland cement cured at ambient temperature10.1007/s13369-015-1906-4 ↗
26. Improving the compressive strength of mortar from a binder of fly ash-calcium carbide residue10.1016/j.conbuildmat.2017.04.167 ↗
27. An experimental study of different curing regimes on the mechanical properties and sorptivity of self-compacting mortars with fly ash and silica fume10.1016/j.conbuildmat.2017.03.228 ↗
28. Characterization and early age physical properties of ambient cured geopolymer mortar based on class C fly ash10.1007/s40069-014-0085-0 ↗
29. Effect of fly ash fineness on temperature rise, setting, and strength development of mortar10.1061/(ASCE)MT.1943-5533.0000411 ↗
30. Heat evolution of high-volume fly ash concrete10.1016/S0008-8846(01)00755-4 ↗
31. Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete10.1016/j.matdes.2014.06.059 ↗
32. Effect of fly ash chemical composition on the reinforcement corrosion, thermal diffusion and strength of blended cement concretes10.1016/j.conbuildmat.2016.09.024 ↗
33. Influence of fineness of fly ash on the carbonation and electrical conductivity of concrete10.1061/(ASCE)MT.1943-5533.0000298 ↗
34. Thermo-mechanical properties of sand and high volume mineral admixtures10.1016/S0378-7788(02)00159-7 ↗
35. Thermo-mechanical properties of concrete containing high-volume mineral admixtures10.1016/j.buildenv.2005.08.027 ↗
36. Thermogravimetry analysis, compressive strength and thermal conductivity tests of non-autoclaved aerated Portland cement–fly ash–silica fume concrete10.1007/s10973-015-4724-8 ↗
37. Chemical and freeze–thaw resistance of fly ash-based inorganic mortars10.1016/j.fuel.2013.04.070 ↗
38. Preliminary electrochemical cementation of high volume fly ash mortars10.1016/j.conbuildmat.2016.06.070 ↗
39. Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar10.1016/j.conbuildmat.2007.06.010 ↗
40. Qualitative and quantitative analysis and identification of flaws in the microstructure of fly ash and metakaolin blended high performance concrete after exposure to elevated temperatures10.1016/j.conbuildmat.2012.09.062 ↗
41. Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures10.1016/j.conbuildmat.2014.04.064 ↗
42. Strength and ultrasonic characteristics of alkali-activated fly ash-slag geopolymer concrete after exposure to elevated temperatures10.1061/(ASCE)MT.1943-5533.0001406 ↗
43. Effects of stress and high temperature on the carbonation resistance of fly ash concrete10.1016/j.conbuildmat.2017.02.039 ↗
44. Fly ash concrete subjected to thermal cyclic loads10.1111/j.1460-2695.2010.01438.x ↗
45. Fly ash influence on the properties of high performance concrete
46. Experimental research of foam concrete with different fly ash level
47. An investigation on thermal conductivity of fly ash concrete after elevated temperature exposure10.1016/j.conbuildmat.2017.05.068 ↗
48. Effects of elevated temperatures on properties of self-compacting-concrete containing fly ash and spent foundry sand10.1016/j.conbuildmat.2012.02.026 ↗
49. Strength properties of high volume y ash (HVFA) concrete at high temperatures
50. Heat deformations of fly ash concrete10.1016/j.cemconcomp.2004.02.014 ↗
51. Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete10.1016/j.conbuildmat.2013.09.047 ↗
52. The effect of high temperature on the design of blast furnace slag and coarse fly ash-based geopolymer mortar10.1016/j.compositesb.2016.02.043 ↗
53. Effect of a micro-copolymer addition on the thermal conductivity of fly ash mortars10.1177/1744259115611650 ↗
54. Temperature dependence of thermal conductivity, diffusion and specific heat capacity for coal and rocks from coalfield10.1016/j.tca.2015.09.018 ↗
55. Čermák · 1982 · 305
56. Thermal conductivity of rocks and minerals
57. Lattice conductivities of single-crystal and polycrystalline materials at mantle pressures and temperatures10.1016/0031-9201(78)90008-0 ↗
58. S, Kwon, Estimation of the thermal properties for partially saturated granite10.1016/j.enggeo.2010.06.007 ↗
59. Effect of curing temperature on creep behavior of fly ash concrete10.1016/j.conbuildmat.2015.08.030 ↗
60. The potential use of geopolymeric materials to immobilise toxic metals: part I. Theory and applications10.1016/S0892-6875(97)00046-0 ↗
61. The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete10.1016/S0008-8846(02)01032-3 ↗
62. Autoclaved aerated concrete based on fly ash in density 350kg/m3 as an environmentally friendly material for energy-efficient constructions10.1016/j.proeng.2015.10.005 ↗