journal article·2018-02

High temperature durability of fiber reinforced high alumina cement composites

Eva Vejmelková, Dana Koňáková, Lenka Scheinherrová, Magdaléna Doleželová, Martin Keppert, Robert Černý

Publisher page

Abstract

Abstract The effect of high temperature exposure on the durability of fiber-reinforced composite materials based on high alumina cement is studied. A combination of X-ray diffraction- and thermal analyses of hydrated phases shows a simultaneous presence of all principal hydrates (CAH10, C2AH8, C3AH6, AH3) in significant amounts during the whole 2–28 days hydration period. The application of basalt aggregates and basalt fibers is found to improve significantly the high-temperature durability, in a comparison with the cement paste. The residual values of compressive and bending strength of the most successful mix with the combination of longer and shorter basalt fibers in a 90:10 ratio are 50% and 34%, respectively, after 1000 °C exposure. The fiber reinforced composite material with the most favorable mechanical properties exhibits also the highest resistance to water and water vapor transport and the lowest water vapor adsorption after 1000 °C pre-heating, which correlates well with its lowest amount of pores bigger than 100 nm. The thermal conductivity and specific heat capacity of all analyzed composites show a significant increase with the increasing moisture content; the differences between the values in dry and water saturated state are up to 100% and 65%, respectively. The thermal strain of all studied materials is almost linear within the whole 20–1000 °C range, with the basalt fibers being able to decrease it by up to 7% at 1000 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. The durability characteristics of high performance concrete: a review10.1016/S0958-9465(02)00081-1 ↗
2. Assessment of the durability of concrete from its permeation properties: a review10.1016/S0950-0618(00)00058-1 ↗
3. Černý · 2002
4. A tool to predict water absorption in porous building materials10.1615/JPorMedia.v20.i2.30 ↗
5. Effect of short-term sustained uniaxial loadings on water absorption of concrete10.1061/(ASCE)MT.1943-5533.0001746 ↗
6. Modeling water absorption in concrete and mortar with distributed damage10.1016/j.conbuildmat.2016.08.044 ↗
7. Prediction of mass transport in cracked-unsaturated concrete by mesoscale lattice model10.1016/j.oceaneng.2016.09.044 ↗
8. F. Tavares, C. Andrade, B. Capra, Coupled simulation of fracture mechanics and transport of chlorid in cracked concrete submitted to permanent loading, in: Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Toledo, Spain, 2013, pp. 1884–1892.
9. Service life of reinforced structural lightweight aggregate concrete under chloride-induced corrosion10.1617/s11527-016-0971-9 ↗
10. Damage mechanisms of two-stage concrete exposed to chemical and physical sulfate attack10.1016/j.conbuildmat.2017.01.112 ↗
11. Chemo-mechanical modelling of the external sulfate attack in concrete10.1016/j.cemconres.2016.12.003 ↗
12. Modelling acid attack on concrete: Part II. A computer model10.1016/j.cemconres.2015.10.012 ↗
13. Influence of cement type on resistance to organic acids10.1680/jmacr.16.00271 ↗
14. Probabilistic durability assessment of concrete structures in marine environments: reliability and sensitivity analysis10.1007/s13344-017-0008-3 ↗
15. Inhibitory effects of chloride ions on concrete sulfate attack in the marine adsorption environment10.1080/1064119X.2016.1174759 ↗
16. Relationships between geological formations and groundwater chemistry and their effects on the concrete lining of tunnels (case study: Tabriz metro line 2)10.1007/s12665-016-5785-0 ↗
17. Mechanisms of cementitious material deterioration in biogas digester10.1016/j.scitotenv.2016.07.072 ↗
18. An equation for determining freeze-thaw fatigue damage in concrete and a model for predicting the service life10.1016/j.conbuildmat.2017.01.042 ↗
19. Assessment of sulfate attack and freeze–thaw cycle damage of cement-based materials by a nonlinear acoustic technique10.1617/s11527-016-0949-7 ↗
20. Durability of reactive powder concrete under chloride-salt freeze-thaw cycling10.1617/s11527-016-0878-5 ↗
21. Fire resistance of concrete-filled steel plate composite (CFSPC) walls10.1016/j.firesaf.2016.12.008 ↗
22. Fire performance of stiffened concrete filled double skin steel tubular columns10.1016/j.firesaf.2016.12.009 ↗
23. Fire performance of blind bolted composite beam to column joints10.1016/j.jcsr.2017.01.011 ↗
24. Influence of high temperature on the residual physical and mechanical properties of foamed concrete10.1016/j.conbuildmat.2016.12.223 ↗
25. Fire resistance of strain hardening cementitious composite with hybrid PVA and steel fibers10.1016/j.conbuildmat.2016.12.204 ↗
26. Behaviour of cement composites with lightweight and heavyweight aggregates at high temperatures
27. Dehydration kinetics of Portland cement paste at high temperature10.1007/s10973-012-2303-9 ↗
28. Composition and microstructural changes in an aged cement pastes upon two heating–cooling regimes, as studied by thermal analysis and X-ray diffraction10.1007/s10973-016-5639-8 ↗
29. Transition and decomposition temperatures of cement phases - a collection of thermal analysis data10.13168/cs.2016.0050 ↗
30. Correlation between hydration mechanism and ultrasonic measurements in an aluminous cement: effect of setting time and temperature on the early hydration10.1016/S0955-2219(01)00530-1 ↗
31. Thermal properties of hydrating calcium aluminate cement pastes10.1016/j.cemconres.2009.09.005 ↗
32. The conversion of high alumina cement10.1680/macr.1975.27.91.59 ↗
33. The effect of temperature on the formation of the hydrated calcium aluminate cement structure10.1016/j.proeng.2013.04.015 ↗
34. Thermo-hydrous behavior of hardened cement paste based on calcium aluminate cement10.1016/j.jeurceramsoc.2014.11.029 ↗
35. Microstructure evolution during the heating process and its effect on the elastic properties of CAC-bonded alumina castables10.1016/j.ceramint.2016.04.058 ↗
36. Influence of the specific surface area of alumina fillers on CAC hydration kinetics10.1680/jadcr.15.00012 ↗
37. High temperature material properties of calcium aluminate cement concrete10.1016/j.conbuildmat.2015.07.023 ↗
38. Temperature dependence of thermal diffusivity of OPC and CAC cement paste10.1680/jadcr.15.00146 ↗
39. Calcium aluminate based cement for concrete to be used as thermal energy storage in solar thermal electricity plants10.1016/j.cemconres.2015.12.013 ↗
40. A short review on basalt fiber reinforced polymer composites10.1016/j.compositesb.2014.12.011 ↗
41. A review on basalt fibre and its composites10.1016/j.compositesb.2014.12.034 ↗
42. A review of fibrous reinforcements of concrete10.1177/0731684416685168 ↗
43. Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete10.1016/j.matdes.2014.01.056 ↗
44. Abrasion resistance and fracture energy of concretes with basalt fiber10.1016/j.conbuildmat.2013.09.040 ↗
45. Experimental investigation of the mechanical properties of basalt fiber-reinforced concrete
46. Dynamic compressive behavior of basalt fiber reinforced concrete after exposure to elevated temperatures10.1002/fam.2339 ↗
47. The effect of carbon fiber additive on early hydration of calcium aluminate cement10.1007/s10973-016-5312-2 ↗
48. Mechanical properties and corrosion of CAC mortars with carbon fibers10.1016/j.conbuildmat.2012.02.020 ↗
49. Bond between reinforcing steel fibres and magnesium phosphate/calcium aluminate binders10.1016/S0958-9465(00)00006-8 ↗
50. ČSN EN 1015 · 2000
51. Interlaboratory comparison of hygric properties of porous building materials10.1177/1097196304042119 ↗
52. Free water intake as means of material characterization10.1177/1744259109104069 ↗
53. Moisture diffusivity of building materials from water absorption measurements10.1177/109719639902200409 ↗
54. ČSN 72 7031 · 2001
55. Measurement of linear thermal expansion coefficient of concrete at high temperatures: a comparison of isothermal and non-isothermal method
56. High alumina cements – some important aspects
57. High-performance concretes from calcium aluminate cements10.1016/S0008-8846(99)00103-9 ↗
58. Characterisation of early stage calcium aluminate cement hydration by combination of non-destructive techniques: acoustic emission and X-ray tomography10.1016/S0955-2219(03)00082-7 ↗