journal article·2018-04Open access

Effect of nanomaterials on ageing and moisture damage using the indirect tensile strength test

Teresa López-Montero, João Crucho, Luís Picado-Santos, Rodrigo Miró

Abstract

Environmental conditions as well as traffic loads lead to the deterioration of asphalt pavements during their service life. For this reason, the use of nanomaterials that improve the mixtures behaviour could be interesting. The behaviour of two mixtures made with binder modified with nanoclay and nanoiron, and their strength against ageing and moisture damage is studied. Mixtures have been subjected to ageing by two procedures: extended heating, Long-Term Oven Ageing (LTOA), and ultraviolet (UV) plus rainfall simulation, Tecnico Accelerated Ageing (TEAGE). The results show that nanoclay improves the mixture behaviour against ageing, while nanoiron does against moisture damage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. State of the art report on ageing test methods for bituminous pavement materials10.1080/1029843042000198568 ↗
2. Mechanical properties of warm-mix asphalt concrete containing different additives and recycled asphalt as constituents applied in real production conditions10.1016/j.conbuildmat.2016.11.051 ↗
3. Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods10.1016/j.conbuildmat.2013.02.081 ↗
4. W.D. Fernández-Gómez H. Rondón F. Reyes Envejecimiento de asfaltos y mezclas asfálticas estado del conocimiento 2011.
5. P. Renken, Aging of high polymer modified bitumens (40/100-64 A) – Assessment of the susceptibility to aging and optimisation of an aging procedure for binder with aggregate, in: Proceedings of the 5th EATA conference, Braunschweig, Germany, 2013.
6. Read · 2003
7. J. Branthaver, J.C. Petersen, R.E. Robertson, J.J. Duvall, S.S. Kim, P.M. Harnsberger, T. Mill, E.K. Ensley, F.A. Barbour, J.F. Schaborn, Binder Characterisation and evaluation – 2 Chemistry, SHRP-A-368, Washington, 1994.
8. Mechanistic-based constitutive modeling of oxidative aging in aging susceptible materials and its effects on the damage potential of asphalt concrete10.1016/j.conbuildmat.2012.12.044 ↗
9. Mechanical performance of dry process fine crumb rubber asphalt mixtures placed on the Portuguese road network10.1016/j.conbuildmat.2014.09.110 ↗
10. A study of asphalt aging using indirect tensile strength test10.1016/j.conbuildmat.2015.07.159 ↗
11. Influence of aging and moisture on laboratory performance of asphalt concrete10.1016/j.conbuildmat.2016.04.063 ↗
12. Differences in cracking resistance of asphalt mixtures due to ageing and moisture damage10.1016/j.conbuildmat.2016.02.199 ↗
13. H. Von Quintus, J. Scherocman, C. Hughes, T. Kennedy, Asphalt Aggregate mixture analysis system, NCHRP, 1991.
14. E.T. Hagos, The Effect of Aging on Binder Properties of Porous Asphalt Concrete, PhD Thesis, Delft University of Technology, 2008.
15. J. Crucho, L. Picado-Santos, J. Neves, S. Capitão, I. Al-Qadi, TEcnico Accelerated aGEing (TEAGE) – new approach to asphalt concrete ageing laboratory simulation, Submitted to Int. J. Pavement Eng.
16. Surface cracking of asphalt mixtures in Southern Africa
17. Durability of asphalt cements
18. Effect of ultraviolet radiation on an asphalt mixture's mechanical and dynamic properties10.15446/ing.investig.v28n3.15116 ↗
19. Martínez · 2005
20. M. Solaimanian T. Kennedy W. Elmore Long term evaluation of stripping and moisture damage in asphalt pavements treated with lime and anti-stripping agents, Report n°: CTR 0–1286-1F 1993 University of Texas at Austin Center of Transportation Research
21. C. Boadu, Evaluation of rut resistance of Superpave fine-graded and coarse-graded mixtures, PhD Thesis, University of Florida, 2005.
22. Effect of asphalt film thickness on the moisture sensitivity characteristics of hot-mix asphalt10.1016/j.buildenv.2006.10.006 ↗
23. L. Qing J. Harvey, Investigation of Conditions for Moisture Damage in Concrete and Appropriate Laboratory Test Methods, Report Number: UCPRC-RR-2005-15 2005 University of California Pavement Research Centre
24. Quantitative evaluation of stripping by the surface reaction test
25. Stripping of asphalt pavements: state-of-the-art, Transport
26. A. Tarrer V. Wagh, The Effect of the Physical and Chemical Characteristics of the Aggregate on Bonding 1991 Strategic Highway Research Program National Research Council
27. A. Dony, C. Turmel, Bitumes-polymères: adaptons nos tests aux techniques d'aujourd'hui, 5th Eurobitume Congress IA (1993) 66-70.
28. Terrel · 1994
29. Matriz árido-ligante: factores implicados en la capacidad adhesiva y cohesiva del ligante asfáltico
30. An overview of moisture damage in asphalt mixtures
31. B.M. Kiggundu, F.L. Robberts, Stripping in HMA mixtures: state-of-the art and critical review of test methods, National Center for Asphalt Technology, NCAT report no. 88-2, Auburn University, Alabama, 1988.
32. D.N. Little, D.R. Jones, Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements, in: Proceedings of the Moisture Sensitivity of Asphalt Pavements – A National Seminar, California, 2003.
33. G.M. García, Análisis comparativo del comportamiento mecánico de mezclas bituminosas. Normativa NLT – Normativa UNE-EN, PhD Thesis, Universidad de Granada, 2012.
34. R. Terrel J. Shute, Summary report on water sensitivity, SHRP-A/IR-89-003 1989 Strategic Highway Research Program National Research Council, Washington
35. AASHTO T245-15, Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus, 2015.
36. ASTM D1075-11, Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures, 2011.
37. CEN, EN 12697-45:2012 – Bituminous mixtures, Test methods for hot mix asphalt, Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test, 2012.
38. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage10.1016/j.conbuildmat.2007.07.009 ↗
39. Optimising the moisture durability SATS conditioning parameters for universal asphalt mixture application10.1080/10298436.2012.655740 ↗
40. Estado del conocimiento de asfaltos modificados en Colombia y su influencia en la pavimentación, Revista virtual de los programas de ingeniería
41. J. Crucho, J. Neves, S. Capitão, L. Picado-Santos, R. Garcia, Estudo experimental sobre os efeitos da modificação com nanopartículas nas propriedades do betume, in: atas do 1°Congresso de Ensaios e Experimentação em Engenharia Civil, José Neves, Álvaro Ribeiro (eds.) (2016) pp. 109–114. ISBN 978-972-8574-44-4.
42. A review of advances of nanotechnology in asphalt mixtures10.1016/j.sbspro.2013.08.144 ↗
43. Effects of nanoclay on rheological properties of bitumen binder10.1016/j.conbuildmat.2009.02.027 ↗
44. Performance of asphalt binder blended with non-modified and polymer-modified nanoclay10.1016/j.conbuildmat.2012.02.056 ↗
45. CEN, EN 12697-30:2012, Bituminous mixtures, Test methods for hot mix asphalt, 2012.
46. CEN, EN 12697-6:2012, Bituminous mixtures, Test methods for hot mix asphalt, Part 6: determination of bulk density of bituminous specimens, 2012.
47. CEN, EN 12697-5:2009, Bituminous mixtures, Test methods for hot mix asphalt, Part 5: determination of the maximum density, 2009.
48. CEN, EN 12697-12:2008, Bituminous mixtures, Test methods for hot mix asphalt, Determination of the water sensitivity of bituminous specimens, 2008.
49. C.A. Bell, Y. AbWahab, M.E. Cristi, D. Sosnovske, NCHRP A383, Selection of Laboratory Aging Procedures for Asphalt-Aggregate Mixtures, 1994.
50. M.G. Lee, M. Tia, B.E. Ruth, G.C. Page, Comparison between the Aging Processes for Asphalt Mixtures and Those for Asphalt Binders, Progress of Superpave (Superior Performing Asphalt Pavement), Evaluation and Implementation, ASTM STP 1322, R.N. Jester, (ed.), American Society for Testing and Materials, 1997.10.1520/STP12084S ↗
51. CEN, EN 12697-23:2003, Bituminous mixtures, Test methods for hot mix asphalt, Determination of the indirect tensile strength of bituminous specimens, 2003.
52. J. Wu, The influence of mineral aggregates and binder volumetrics on bitumen ageing, PhD Thesis, University of Nottingham, 2009.