Interlayer shear strength of Roller compacted concrete (RCC) with various interlayer treatments
Source abstract
Abstract
Abstract Roller compacted concrete (RCC) is constructed in layers. It is a dry and lean concrete with the interlayer being generally weak. In this paper, the shear strength of RCC interlayer under different time intervals and interlayer treatments are studied, and the corresponding change laws of shear behaviors are analyzed. Through the comparison of the test results at different time intervals, it was found that the peak shear strength decreases with increases to the time interval. Before the initial setting, the influence of time interval is relatively small. Between the initial setting and before the final setting, the influence of time interval becomes evident, and after the final setting it is seen that the influence of the time interval is much greater. Three interlayer treatments are tested, namely, mortar, expansion agent with mortar, and nano SiO2 with mortar. It was seen that treatments with the expansion agent and the nano SiO2 improve shear strength more than that of mortar alone. The cohesive stress c and friction coefficient f of the RCC interlayer are calculated for each case. At peak stress, f keeps steady and c decreases with the increase of the time interval. For treatments with nano SiO2, values of c were observed to be improved while for treatments with the expansion agent, higher values of f were seen. The shear strength of RCC interlayer can be well explained by using test results of scanning electron microscope to provide a view of the structure on the mesoscopic scale. The results of this paper are helpful to understand the influence laws of shear strength of RCC interlayer, and it has significance for the improvement of interlayer construction technology of RCC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. The characteristics of air void and frost resistance of RCC with fly ash and expansive agent10.1016/j.conbuildmat.2005.01.039 ↗
2. Transport properties of high volume fly ash roller compacted concrete10.1016/j.cemconcomp.2011.07.010 ↗
3. EM 1110-2-2006, Roller-Compacted Concrete. US Army Corps of Engineers, 2000.
4. M.R.H. Dunstan, New developments in RCC dams, in: Proceedings of 6th International Symposium on Roller Compacted Concrete (RCC) Dams. Zaragoza, Spain, 2012, pp. 23–25.
5. Study on failure mechanism of roller compacted concrete gravity dam
6. Impact of interlayer and size effect on the mechanical performances of fully graded RCC
7. S. Sha, Z. Lei, X. Zhang. Study on failure mechanism of roller compacted concrete gravity dams by an isotropic damage model, Proceedings of Smart City and Systems Engineering (ICSCSE), International Conference on. IEEE, 2016, pp. 68–71.10.1109/ICSCSE.2016.0028 ↗
8. Effect of time span between mixing and compacting on roller compacted concrete (RCC) containing ground granulated blast furnace slag (GGBFS)10.1016/j.conbuildmat.2010.04.054 ↗
9. Assessing the effects of supplementary cementitious materials on the performance of low-cement roller compacted concrete pavement10.1016/j.conbuildmat.2010.06.003 ↗
10. Influence of nano-SiO2 and nano-Al2O3 additions on the shear strength and the bending moment capacity of RC beams10.1016/j.conbuildmat.2016.06.132 ↗
11. Shape and size effects on the compressive strength of high-strength concrete10.1016/j.cemconres.2007.09.020 ↗
12. Size effect on compressive behaviors of normal-strength concrete cubes made from demolished concrete blocks and fresh concrete10.1680/macr.13.00053 ↗
13. Seepage and stress analysis of anti-seepage structures constructed with different concrete materials in an RCC gravity dam10.1016/j.wse.2015.10.001 ↗
14. Roller compacted concrete-tensile strength of horizontal joints10.1007/BF02482287 ↗
15. J.L. Aguiar, A. Camelo, A. Ribeiro. Roller compacted concrete (RCC): strength and permeability of horizontal joints, Proceedings of International Congress Challenges of Concrete Construction–Sustainable Concrete Construction, 2002, pp. 751–760.10.1680/scc.31777.0075 ↗
16. Analysis on compression-shear strength of roller compacted concrete
17. Slant shear bond strength between self-compacting concrete and old concrete10.1016/j.conbuildmat.2016.11.023 ↗
18. Improving the bonding between old and new concrete by adding carbon fibers to the new concrete10.1016/0008-8846(95)00037-D ↗
19. Influence new-to-old concrete interface qualities on the behavior of support zones of composite concrete beams10.1016/j.conbuildmat.2011.04.045 ↗
20. Interlayer bonding performance of organic fiber and polymer modified cement concrete road overlay
21. SL352-2006 · 2006
22. Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters10.1016/S1365-1609(02)00101-6 ↗
23. New peak shear strength criterion of rock joints based on quantified surface description10.1007/s00603-013-0395-6 ↗
24. GB/T176-2008. Methods for chemical analysis of cement, 2008.
25. GB200-2003. Moderate heat Portland cement, Low heat Portland cement, Low heat Portland slag cement, 2003.
26. GB/T1596-2005. Fly ash used for cement and concrete, 2005.
27. DL/T5055-2007. Technical specification of fly ash for use in hydraulic concrete, 2007.
28. DL/T5100-1999. Technical code for hydraulic concrete admixtures, 1999.
29. DL/T 5433-2009. Test code for hydraulic roller compacted concrete, 2009.
30. SL352-2006 · 2006
31. A thermodynamic model of sliding friction10.1063/1.3699027 ↗