Research on the formation of M1-type alite doped with MgO and SO3—A route to improve the quality of cement clinker with a high content of MgO
Source abstract
Abstract
Abstract This paper discusses the effect of SO3 dopants on the M1 polymorph formation and mechanical properties of alite containing a high content of MgO. The structure of the M1 alite is identified by XRD, high-temperature XRD and TEM analysis. A characteristic XRD pattern of M1 alite doped with MgO and SO3 is determined, and TEM results show that M1 alite has an incommensurate modulated structure feature with 2.4 times the subcell dimension along [ 2 ¯ 1 0]H∗ and could be expressed as ha∗ + kb∗ + lc∗ + m/[2.4(−2a∗ + b∗)], where m = ±1. The First-Principles method is used to simulate the structure of M1 alite, and the calculated Delta Cohesive Energy is approximately 11–12 eV between the M1 and M3 alite. Quantitative analysis is performed by the Rietveld method. The SO3/MgO (mass ratio from SO3 to MgO) and M1% in alite M 1 - C 3 S % M 1 - C 3 S % + M 3 - C 3 S % × 100 % are shown to have a strong linear relationship, which can be defined as M 1 - C 3 S % M 1 - C 3 S % + M 3 - C 3 S % × 100 % = 24.73 + 108.11 * SO3/MgO (%). Mechanical properties results show that appropriate SO3 dopant can improve the compressive strength of alite containing high MgO while over dosed SO3 will lead to a contrary effect because of the decomposition of alite. The relationship between M1% in the alite and the compressive strengths at different ages is also given. The optimal M1% in alite is approximately 68% and the best SO3/MgO ratio is approximately 0.43 because the compressive strength could be maximized at each age.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. http://www.ccement.com/news/content/9342369357778.html. (Accessed 13 Mar 2018).
2. Alite-ye’elimite cement: synthesis and mineralogical analysis10.1016/j.cemconres.2012.10.020 ↗
3. Hydration properties of the alite-ye’elimite cement clinker synthesized by reformation10.1016/j.conbuildmat.2015.09.040 ↗
4. Kinetics of calcium sulfoaluminate formation from tricalcium aluminate, calcium sulfate and calcium oxide10.1016/j.cemconres.2013.10.006 ↗
5. Enhancing the addition of fly ash from thermal power plants in activated high belite sulfoaluminate cement10.1016/j.conbuildmat.2013.10.099 ↗
6. Compatibility between a polycarboxylate superplasticizer and the belite-rich sulfoaluminate cement: setting time and the hydration properties10.1016/j.conbuildmat.2013.10.028 ↗
7. Polymorphism of tricalcium silicate and its solid solutions10.1111/j.1151-2916.1967.tb15009.x ↗
8. Microscopic study on the polymorphism of Ca3SiO510.1016/0008-8846(78)90020-0 ↗
9. Polymorphism of tricalcium silicate-new X-ray-diffraction data
10. Tricalcium silicate Ca3SiO5 superstructure analysis: a route towards the structure of the M-1 polymorph10.1524/zkri.2012.1425 ↗
11. Tricalcium silicate CA3O[SIO4] – the monoclinic superstructure
12. Cryatal-structure of tricalcium silicate from a portland-cement clinker and its application to quantitative XRD analysis
13. Polymorphism of tricalcium silicate in Portland cement: a fast visual identification of structure and superstructure10.1154/1.1523079 ↗
14. The influence of the alite polymorphism on the strength of the Portland cement10.1016/S0008-8846(02)00756-1 ↗
15. Taylor · 1997
16. Effect of MgO and SO3 on the impurity concentration in alite in Portland-cement clinker10.1111/j.1151-2916.1992.tb04407.x ↗
17. Factors influencing the phase constitution of alite in portland-cement clinker10.1016/0008-8846(82)90078-3 ↗
18. Effect of SO3 and MgO on Portland cement clinker: formation of clinker phases and alite polymorphism10.1016/j.conbuildmat.2014.02.029 ↗
19. Statistical research on phase formation and modification of alite polymorphs in cement clinker with SO3 and MgO10.1016/j.conbuildmat.2012.07.099 ↗
20. Research review of cement clinker chemistry10.1016/j.cemconres.2015.05.018 ↗
21. First principles methods using CASTEP10.1524/zkri.220.5.567.65075 ↗
22. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
23. Inhomogeneous electron gas10.1007/s12045-017-0529-3 ↗
24. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
25. Simplified generalized-gradient approximation and anharmonicity: benchmark calculations on molecules10.1103/PhysRevB.55.7454 ↗
26. Special points for Brillouin-zone integrations10.1103/PhysRevB.16.1748 ↗
27. A modified self-scaling memoryless Broyden–Fletcher–Goldfarb–Shanno method for unconstrained optimization10.1007/s10957-014-0528-4 ↗
28. A Broyden—Fletcher—Goldfarb—Shanno optimization procedure for molecular geometries10.1016/0009-2614(85)80574-1 ↗
29. Relation between reactivity and electronic structure for α′ L-, β- and γ-dicalcium silicate: a first-principles study10.1016/j.cemconres.2013.12.004 ↗
30. Low-temperature thermal expansion of LiH, MgO and CaO10.1107/S0021889868005418 ↗
31. The crystal structure of periclase
32. Anhydrite: a refinement10.1107/S0567740875007145 ↗
33. The superstructure of C3S from synchrotron and neutron powder diffraction and its role in quantitative phase analyses10.1016/S0008-8846(02)00796-2 ↗
34. Orientation relations and conversion matrix between M3 supercell and pseudohexagonal subcell in tricalcium silicate solid solution
35. Orientation relations and conversion matrix between M1 supercell and pseudo-hexagonal subcell in alite
36. Structural modulations in monoclinic tricalcium silicate solid solutions doped with zinc oxide, M(I), M(II), and M(III)10.1111/j.1151-2916.2002.tb00106.x ↗