Effect of binding materials on carbide slag based high utilization solid-wastes autoclaved aerated concrete (HUS-AAC): Slurry, physic-mechanical property and hydration products
Source abstract
Abstract
Abstract With the objective of adjusting rough-body foaming and thickening stability of carbide slag based high utilization solid-wastes autoclaved aerated concrete (HUS-AAC) during pre-curing process, the effect of binding material composition and admixture on slurry, physic-mechanical property and hydration products were investigated to put forward an appropriate slurry performance adjustment scheme. Slurry properties include slump flow, time-dependent rheological, and gas foaming properties. Slump flow was conducted to estimate the initial fluidity of primary slurry with different ordinary portland cement 42.5 (OPC42.5) content and sulphate aluminium cement (SAC) substitution ratio. The slurry time-dependent shear stress, apparent viscosity and gas foaming property were measured to evaluate the rough-body stability during the coupling of foaming and thickening process. Physic-mechanical properties were carried out to evaluating the influence of binding materials on applicability. The mineral composition (XRD), thermal characteristics (TG-DSC) and crystal characteristics (29Si-NMR) of carbide slag based HUS-AAC hydration products were analyzed to making a thorough inquiry in the influence mechanism of binding materials on the mechanical properties. The results indicated that increasing OPC42.5 content can modify slurry properties in a small range, which was unable to meet the slurry adjustment target. Introducing of SAC can improve rough-body stability and shorten pre-curing time of HUS-AAC effectively. On the other hand, increasing proportion of OPC42.5 and SAC both has indistinctive effect on bulk density and positive effect on compressive strength of HUS-AAC. Furthermore, increment of OPC42.5 content resulted in increscent crystallinity and quantity of tobermorite, however, addition of SAC led to the opposite effect. The enhancement effect of SAC on HUS-AAC may attribute to the strengthen of pore partition material caused by substituting microcellular structure filling particles from soft white to tough quartz, which is equivalent to increase the strength of aggregate in pore partition material. In conclusion, from the angle of rough-body pre-curing stability and efficiency, and mechanical properties, the conventional OPC42.5 can be substituted by SAC completely.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
2. Utilization of natural zeolite in aerated concrete production10.1016/j.cemconcomp.2009.10.002 ↗
3. Hygric, thermal and durability properties of autoclaved aerated concrete10.1016/j.conbuildmat.2012.12.036 ↗
4. Technologia Autoklawizowanego Betonu Komòrkowego
5. Jineng · 1992
6. Influence of air-cooled slag on physicochemical properties of autoclaved aerated concrete10.1016/j.cemconres.2004.10.011 ↗
7. Properties of the autoclaved aerated concrete produced from coal bottom ash10.1016/j.jmatprotec.2008.02.044 ↗
8. Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag10.1016/j.conbuildmat.2011.08.034 ↗
9. Synthesis and microstructure analysis of autoclaved aerated concrete with carbide slag addition10.1007/s11595-014-1034-0 ↗
10. Utilisation of Saudi sands for aerated concrete production10.1016/0262-5075(86)90002-3 ↗
11. Preparation and properties of autoclaved aerated concrete using coal gangue and iron ore tailings10.1016/j.conbuildmat.2015.12.041 ↗
12. Autoclaved aerated concrete prepared with calcium carbide residue and iron ore tailings as raw materials
13. Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products10.1016/j.jclepro.2016.03.172 ↗
14. Current situation and comprehensive utilization of iron ore tailing resources10.1007/s10913-006-0069-9 ↗
15. Mechanical properties and microstructure of blended cement containing modifed quartz tailing10.1007/s11595-017-1723-6 ↗
16. Cementing material from calcium carbide residue-rice husk ash10.1061/(ASCE)0899-1561(2003)15:5(470) ↗
17. Properties of cement made by partially replacing cement raw materials with municipal solid waste ashes and calcium carbide waste10.1016/j.conbuildmat.2004.04.014 ↗
18. Hydrothermal synthesis of xonotlite from carbide slag10.1016/j.pnsc.2008.01.036 ↗
19. CO2 capture by carbide slag from chlor-alkali plant in calcination/carbonation cycles10.1016/j.ijggc.2012.03.012 ↗
20. CO2 capture using carbide slag modified by propionic acid in calcium looping process for hydrogen production10.1016/j.ijhydene.2013.08.030 ↗
21. Wang · 1999
22. High-performance cement matrices based on calcium sulfoaluminate-belite compositions10.1016/S0008-8846(01)00649-4 ↗
23. Slump flow of autoclaved aerated concrete slurries
24. Taylor · 1997 · 227
25. Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers10.1016/j.powtec.2018.02.014 ↗
26. Effect of graphene oxide on the rheological properties of cement pastes10.1016/j.conbuildmat.2015.07.181 ↗
27. Relations between structure and mechanical properties of autoclaved aerated concrete10.1016/0008-8846(79)90049-8 ↗
28. Analysis and mechanism of hydrogarnets formation and transformation in autoclaved reaction
29. Preparation of high strength autoclaved bricks from hematite tailings10.1016/j.conbuildmat.2011.08.078 ↗
30. Bensted · 2002
31. Experimental determination of bulk modulus of 14 Å tobermorite using high pressure synchrotron X-ray diffraction10.1016/j.cemconres.2011.11.004 ↗
32. Phase transformation of iron ore tailings during autoclaved curing
33. Autoclaving reaction activity of four kinds of silicate minerals
34. Infrared spectroscopic studies of autoclaved reaction activity of silicious solid waste
35. Mechanical and hydration characteristics of autoclaved aerated concrete (AAC) containing iron-tailings: effect of content and fineness10.1016/j.conbuildmat.2016.10.031 ↗
36. Autoclaved cement quartz pastes: the effects on chemical and physical properties when using ground quartz with different surface areas Part I: quartz of wide particle size distribution10.1016/0008-8846(96)00117-2 ↗
37. Yang · 2000
38. 29Si and 27Al high-resolution NMR characterization of calcium silicate hydrate phases in activated blast-furnace slag pastes10.1016/S0008-8846(01)00530-0 ↗
39. Solid-state high-resolution 29Si NMR spectroscopy of synthetic 14 Å, 11 Å and 9 Å tobermorites10.1016/0008-8846(82)90081-3 ↗