journal article·2018-11

Mechanical properties and electromagnetic radiation characteristics of concrete specimens after exposed to elevated temperatures

Li Dexing, Wang Enyuan, Kong Xiangguo, Zhao Shuai, Kong Yanhui, Wang Xiaoran, Wang Dongming, Liu Quanlin

Publisher page

Abstract

Abstract Experiments on electromagnetic radiation (EMR) from coal and rock under different loading modes have been conducted in laboratories and in the field, but there are few reports about EMR from concrete after it has been exposed to high temperatures. To determine the feasibility of using EMR to evaluate the condition of concrete after high temperature events, like structure fires, three groups of concrete specimens were tested by uniaxial compression after being heated to elevated temperatures; the EMR signals were recorded and analyzed. The results show that the compressive strength decreases with exposure temperature higher than 100 °C and the modulus of elastic is generally inversely proportional to exposure temperature. Low frequency EMR (∼10.9–131.5 kHz) was observed during loading. The EMR impulses respond well to the stress, so they should reflect the stress state in the specimens. In our experiments, a large EM signal arrives that nearly coincides with the main fracture and then the signal rapidly attenuates; a series of low-amplitude oscillations follow. For specimens after being heated to different temperatures, the EMR waveforms are similar in shape but differ in intensity. The principal frequency and the corresponding maximum amplitude in the EMR spectra increase with the exposure temperature. Based on the exclusion method, piezoelectric effects and motion from the variable velocity of charged particles are believed to be the probable mechanisms causing EMR to be generated from the specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Earthquake Detection and Analysis · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Comparison of the strength and durability performance of normal- and high-strength pozzolanic concretes at elevated temperatures10.1016/S0008-8846(01)00580-4 ↗
2. A multiphase thermo-hydro-mechanical model for concrete at high temperatures—Finite element implementation and validation under LOCA load10.1016/j.nucengdes.2007.03.047 ↗
3. Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperatures10.1016/S0008-8846(01)00736-0 ↗
4. The effect of high temperature on compressive strength and splitting tensile strength of structural lightweight concrete containing fly ash10.1016/j.conbuildmat.2007.07.033 ↗
5. Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures10.1016/S0958-9465(98)00034-1 ↗
6. Experimental research on mechanical properties of different type of concrete after high temperature
7. Effects of elevated temperatures on properties of concrete10.1016/j.firesaf.2007.01.003 ↗
8. Impact mechanical properties of concrete at and after exposure to high temperature
9. Signal-based nonlinear modelling for damage assessment under variable temperature conditions by means of acousto-ultrasonics10.1002/stc.1735 ↗
10. Microstructural development of hydrating portland cement paste at early ages investigated with non-destructive methods and numerical simulation10.1007/s10921-013-0175-y ↗
11. Analysis of the stress ratio of anisotropic rocks in uniaxial tests10.1016/j.ijmst.2017.03.022 ↗
12. Fractal characteristics and acoustic emission of coal containing methane in triaxial compression failure10.1016/j.jappgeo.2015.11.018 ↗
13. Research on precursory characteristics of critical slowing down before the failure of coal samples containing methane
14. Fractal characteristics of acoustic emissions from coal under multi-stage true-triaxial compression10.1088/1742-2140/aac31a ↗
15. Application of thermally stimulated acoustic emission method to assess the thermal resistance and related properties of coals10.1016/j.ijmst.2017.12.019 ↗
16. Acoustic emission and microstructural changes in fly ash geopolymer concretes exposed to simulated fire10.1617/s11527-016-0857-x ↗
17. Non-destructive evaluation of concrete mixtures for direct LNG containment10.1016/j.matdes.2015.05.084 ↗
18. Monitoring early-age concrete with the acoustic-emission method and determining the change in the electrical properties
19. Experimental research of the AE responses and fracture evolution characteristics for sand-paraffin similar material10.1016/j.conbuildmat.2016.12.028 ↗
20. Electromagnetic radiation10.1016/S0016-0032(14)91086-9 ↗
21. Electric effects associated with plastic deformation of ionic crystals10.1070/PU1969v011n05ABEH003738 ↗
22. Sources of electromagnetic radiation from fracture of rock samples in laboratory10.1029/GL014i004p00331 ↗
23. Rockburst hazard forecast by electromagnetic radiation excited by rock fracture10.1007/BF01045719 ↗
24. An experimental study of the electromagnetic emission during the deformation and fracture of coal or rock
25. Electromagnetic emission accompanying fracture of quartz-bearing rocks10.1029/GL004i008p00333 ↗
26. Experimental study of electromagnetic emission during rock failure
27. An experimental study of the electromagnetic emission memory effect during the deformation and fracture of coal or rock10.1002/cjg2.669 ↗
28. Electromagnetic emission graded warning model and its applications against coal rock dynamic collapses10.1016/j.ijrmms.2011.02.006 ↗
29. Research progress on electromagnetic radiation in gas-containing coal and rock fracture and its applications10.1016/j.ssci.2011.08.044 ↗
30. Numerical simulation of electromagnetic radiation caused by coal/rock deformation and failure10.1016/j.ijrmms.2012.07.002 ↗
31. Use of ultra-low-frequency electromagnetic emission to monitor stress and failure in coal mines10.1016/j.ijrmms.2014.02.004 ↗
32. Regain of strength after firing of concrete10.1680/macr.1970.22.72.149 ↗
33. Effect of high temperatures on high performance steel fiber reinforced concrete10.1016/j.cemconres.2006.03.024 ↗
34. Benefits of low modulus of elasticity and of fiber reinforcement of cement based mortars as thin bonded overlay materials10.1007/s11340-013-9776-8 ↗
35. How to monitor the modulus of elasticity of concrete, automatically since the earliest age?10.1617/s11527-013-0051-3 ↗
36. A practical equation for Modulus of elasticity of concrete
37. Analytical model for compressive strength, Modulus of elasticity and peak strain of structural lightweight aggregate concrete10.1016/j.conbuildmat.2012.06.034 ↗
38. Study on characteristics and rules of surface potential during coal fracture
39. Electromagnetic emissions during dilating fracture of a rock10.1016/j.jseaes.2013.05.004 ↗
40. Medium term stochastic load model for transformer and feeder from AMI load data spectral analysis10.1016/j.ijepes.2017.02.010 ↗
41. Performance of metakaolin concrete at elevated temperatures10.1016/S0958-9465(01)00061-0 ↗
42. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
43. Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to 800 °C10.1016/S0008-8846(99)00240-9 ↗
44. Radiowave radiation during brittle fracture of dielectrics
45. Emission of electromagnetic pulses during nucleation of cracks in solid insulators
46. Electrokinetic phenomena associated with earthquakes10.1029/GL003i007p00365 ↗
47. The model of compressed atoms and electron emission of rock fracture
48. Electron mission during rock fracture
49. Investigations of mechanically induced excited states on cleavage planes of ionic crystals. I. Method and apparatus for charge and electron emission measurements10.1002/pssa.2210770218 ↗
50. Electromagnetic and acoustic emission associated with rock fracture10.1016/0031-9201(89)90225-2 ↗
51. Electromagnetic emissions during rock blasting10.1029/91GL01076 ↗
52. Experimental study of electromagnetic radiation during coal heating
53. The electromagnetic effect accompanying the fracturing of alkaline-haloid crystals and rock
54. Electromagnetic radiation associated with induced triaxial fracture in granite10.1080/095008399177570 ↗