journal article·2019-01

Improving the mechanical and durability performance of recycled concrete aggregate-bearing mortar mixtures by using binary and ternary cementitious systems

Ali Mardani-Aghabaglou, Cihat Yüksel, Ahsanollah Beglarigale, Kambiz Ramyar

Publisher page

Abstract

Abstract Environmental concerns arising from the generation of huge amount of construction and demolition waste requires recycling this material, which would otherwise be sent to landfill. The mechanical and durability performance of mortar mixtures containing recycled concrete (RC) aggregate was investigated in this study. Although it is known that the adhered mortar creates a porous and a weak additional interfacial transition zone in recycled aggregate-bearing mixture, the dependence of the behavior on the type of new matrix should be searched in detail. For this purpose, compressive strength, ultrasound pulse velocity, water absorption, chloride ion penetration, freeze-thaw and sulfate resistance as well as drying shrinkage tests were conducted on mortar mixtures containing either natural aggregate (sand) or recycled concrete aggregate. Scanning electron micrographs and optical microscope images were obtained on specimens exposed to sulfate attack. The mineral admixtures used in the study included silica fume (SF), metakaolin (MK) and a Class C fly ash (FA). In addition to the control mixture including no mineral admixture (PC), silica fume- and metakaolin-incorporating binary systems (PC-SF and PC-MK) were prepared. Besides, two ternary systems, i.e., PC-SF-FA and PC-MK-FA were also designed. The results indicated a gradual strength gain beyond 28 days and reduction in initial shrinkage values in RC-bearing mixtures, compared to those of the sand-bearing mixtures. Besides, the porous character of RC helped reducing the internal pressure and resultant damage related with expanding water and swelling ettringite crystals in freeze-thaw and sulfate attack tests, respectively. The exact effect of recycled aggregate on mortar properties was found to be greatly dependent on the type of the cementitious system of the new mix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Preliminary study on the proportion design of recycled aggregate concrete
2. Characterization of recycled aggregates construction and demolition waste for concrete production following the Spanish structural concrete code EHE-0810.1016/j.conbuildmat.2010.07.012 ↗
3. Concretes and mortars recycled with water treatment sludge and construction and demolition rubble10.1016/j.conbuildmat.2008.11.001 ↗
4. Use of recycled aggregates in molded concrete bricks and blocks10.1016/S0950-0618(02)00019-3 ↗
5. Microstructural analyses of recycled aggregate-bearing mortar mixture
6. Freeze–thaw resistance, mechanical and transport properties of self-consolidating concrete incorporating coarse recycled concrete aggregate10.1016/j.matdes.2013.07.100 ↗
7. Mechanical and durability performance of concrete incorporating fine recycled concrete and glass aggregates10.1617/s11527-014-0342-3 ↗
8. Effect of new paste volume on performance of structural concrete using coarse and granular recycled concrete aggregate of controlled quality10.1016/j.conbuildmat.2015.10.064 ↗
9. The effect of shear strength on load capacity of FRP strengthened beams with recycled concrete aggregate10.1016/j.conbuildmat.2015.10.137 ↗
10. Recycled concrete aggregate attrition during mixing new concrete10.1016/j.conbuildmat.2016.04.131 ↗
11. Long-term deflection and flexural behavior of reinforced concrete beams with recycled aggregate10.1016/j.matdes.2013.04.044 ↗
12. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
13. Properties of pervious concrete containing recycled concrete block aggregate and recycled concrete aggregate10.1016/j.conbuildmat.2016.02.060 ↗
14. An experimental study on flexural strength of reinforced concrete beams with 100% recycled concrete aggregate10.1016/j.engstruct.2015.01.043 ↗
15. Influence of type and replacement level of recycled aggregates on concrete properties
16. Shear performance of reinforced concrete beams incorporating recycled concrete aggregate and high-volume fly ash10.1016/j.jclepro.2015.12.017 ↗
17. Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete10.1016/S1644-9665(12)60093-4 ↗
18. Use of recycled fine aggregate in concretes with durable requirements10.1016/j.wasman.2011.06.011 ↗
19. Effect of moisture state of recycled fine aggregate on the cracking resistibility of concrete10.1016/j.conbuildmat.2013.03.059 ↗
20. Properties of concrete incorporating fine recycled aggregate10.1016/j.cemconres.2004.06.017 ↗
21. Enhancing mechanical and durability properties of recycled aggregate concrete10.1016/j.conbuildmat.2017.09.137 ↗
22. Recycled aggregate from C&D waste & its use in concrete – a breakthrough towards sustainability in construction sector: a review10.1016/j.conbuildmat.2014.07.003 ↗
23. Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates10.1016/j.cemconcomp.2009.06.005 ↗
24. Long-term mechanical and durability properties of recycled aggregate concrete prepared with the incorporation of fly ash10.1016/j.cemconcomp.2012.12.011 ↗
25. Durability of recycled aggregate concrete using pozzolanic materials10.1016/j.wasman.2007.03.003 ↗
26. TS EN 197-1 · 2012
27. TS EN 450-1 · 2013
28. TS EN 196-1 · 2016
29. TS EN 1097-6 · 2013
30. ASTM C597–16 · 2016
31. Neville · 2010
32. Comparison of results of three methods for determining young’s modulus of elasticity of concrete
33. ASTM C642–13 · 2013
34. ASTM C1202–17, · 2017
35. ASTM C666 C666M-15 · 2015
36. ASTM C1012 C1012M-15 · 2015
37. ASTM C157 C157M-17 · 2017
38. Mehta · 2006
39. Use of mineral admixtures for enhanced resistance against sulfate attack10.1016/j.conbuildmat.2011.03.036 ↗
40. Long-term mitigating effect of lithium nitrate on delayed ettringite formation and ASR in concrete10.1016/j.matchar.2017.09.025 ↗
41. Mechanism of expansion of mortars immersed in sodium sulfate solutions10.1016/j.cemconres.2012.10.001 ↗
42. Effect of ettringite morphology on DEF-related expansion10.1016/j.cemconcomp.2010.01.002 ↗
43. Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point10.1016/j.conbuildmat.2014.07.089 ↗