Very ductile polymer concrete using carbon nanotubes
Source abstract
Abstract
Abstract Polymer concrete (PC) is a type of concrete where a polymer is used to replace cement as the binder. PC is an impermeable and chemical resistant concrete with appreciable mechanical properties. However, for most structural engineers, PC advantages do not outweigh its higher cost when compared with normal cement concrete. We report on the production of very ductile PC (measured by tensile strain at failure) with appreciable tensile strength utilizing a hybrid mixture of pristine and carboxyl (COOH) functionalized multi-walled carbon nanotubes (MWCNTs) at 2.0 wt% of epoxy resin. Experimental investigations reveal that COOH functionalization maximizes PC ductility reaching unprecedented 5.5% failure strains and increasing toughness by 184%. Fourier transformation infrared spectroscopy and dynamic modulus analysis indicate an increase in crosslinking density of the epoxy matrix up to 84% due to the carbonyl band formation induced by the COOH functionalization of MWCNTs. The significant improvement in ductility and energy absorption provides a promising platform for creating very ductile PC with attractive properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Polymer-modified concrete: review10.1061/(ASCE)0899-1561(1997)9:2(85) ↗
2. Vinyl ester and acrylic based polymer concrete for electrical applications10.1016/S0960-8974(02)00036-0 ↗
3. Experimental investigation and constitutive modeling of polymer concrete and sand interface
4. Mechanical characterization of fiber reinforced polymer concrete10.1590/S1516-14392005000300023 ↗
5. Thermal and fatigue behavior of polymer concrete overlaid beams10.1061/(ASCE)0899-1561(1993)5:4(460) ↗
6. Deformation behavior of acrylic polymer concrete: Effects of methacrylic acid and curing temperature10.1016/j.conbuildmat.2014.04.051 ↗
7. Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250 °C10.1016/j.conbuildmat.2011.07.027 ↗
8. A contribution to the study of the fracture energy of polymer concrete and fiber reinforced polymer concrete10.1016/j.polymertesting.2003.09.008 ↗
9. Luffa fibers and gamma radiation as improvement tools of polymer concrete10.1016/j.conbuildmat.2013.05.038 ↗
10. Fracture and flexural characterization of natural fiber-reinforced polymer concrete10.1016/j.conbuildmat.2005.02.008 ↗
11. Assessment of fracture properties of epoxy polymer concrete reinforced with short carbon and glass fibers10.1016/j.conbuildmat.2004.04.010 ↗
12. Effects of thermal cycles on mechanical properties of an optimized polymer concrete10.1016/j.conbuildmat.2011.03.047 ↗
13. Strength evaluation and energy-dissipation behavior of fiber-reinforced polymer concrete10.1520/ACEM20130074 ↗
14. A novel polymer concrete made from fine silica sand and polyester10.1007/s11029-015-9528-1 ↗
15. Characterisation of polymer concrete with epoxy polyurethane acryl matrix10.1016/j.conbuildmat.2012.07.037 ↗
16. Mechanical properties of acrylic polymer concrete containing methacrylic acid as an additive10.1016/j.conbuildmat.2012.07.093 ↗
17. Structural test of precast polymer concrete10.1002/app.30731 ↗
18. Properties of epoxy polymer concrete matrix: Effect of resin-to-filler ratio and determination of optimal mix for composite railway sleepers10.1016/j.conbuildmat.2016.07.111 ↗
19. Effect of loading and surface modification of MWCNTs on the fracture behavior of epoxy nanocomposites10.1177/0731684405056425 ↗
20. Influence of functionalization on properties of MWCNT–epoxy nanocomposites10.1016/j.msea.2010.09.095 ↗
21. Reinforcing epoxy polymer composites through covalent integration of functionalized nanotubes10.1002/adfm.200305162 ↗
22. Evaluation of the mechanical properties of PMMA reinforced with carbon nanotubes – experiments and modeling. Exp
23. Nano reinforced cement and concrete composites and new perspective from graphene oxide10.1016/j.conbuildmat.2014.09.040 ↗
24. Fracture toughness and fatigue life of MWCNT/epoxy composites10.1016/j.msea.2008.04.051 ↗
25. Fracture toughness and electrical conductivity of epoxy composites filled with carbon nanotubes and spherical particles10.1016/j.compositesa.2012.09.012 ↗
26. Investigation of the effect of single wall carbon nanotubes on interlaminar fracture toughness of woven carbon fiber-epoxy composites10.1177/0021998310389088 ↗
27. Epoxy nanocomposites - fracture and toughening mechanisms10.1016/j.engfracmech.2006.05.018 ↗
28. Effect of nano-particles on durability of fiber-reinforced concrete pavement10.1016/j.conbuildmat.2013.07.037 ↗
29. Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete10.1016/j.matdes.2012.03.008 ↗
30. New polymer concrete with superior ductility and fracture toughness using alumina nanoparticles10.1061/(ASCE)MT.1943-5533.0001894 ↗
31. Improving fracture toughness of polymer concrete using carbon nanotubes10.3141/2612-11 ↗
32. Improving fatigue performance of GFRP composites using carbon nanotubes10.3390/fib3010013 ↗
33. Investigation of FRP lap splice using epoxy containing carbon nanotubes10.1061/(ASCE)CC.1943-5614.0000504 ↗
34. Limiting shear creep of epoxy adhesive at the FRP concrete interface using multi-walled carbon nanotubes10.1016/j.ijadhadh.2011.09.006 ↗
35. ASTM C1437-13. Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA, 2013.
36. ASTM D638-14. Standard Test Method for Tensile Properties of Plastics. ASTM International, West Conshohocken, PA, 2014.
37. Synthesis of eugenol-based polybenzoxazine-POSS nanocomposites for low dielectric applications10.1002/pc.23107 ↗
38. Calculation of crosslink density in short chain networks
39. Variation in chemical, colloidal and electrochemical properties of carbon nanotubes with the degree of carboxylation10.1007/s11051-016-3697-2 ↗
40. Enhanced electrical and mass transfer characteristics of acid-treated carbon nanotubes for capacitive deionization10.1016/j.cap.2015.09.004 ↗
41. Potentiometric titration as a straightforward method to assess the number of functional groups on shortened carbon nanotubes10.1016/j.carbon.2010.03.015 ↗
42. Fullerene pipes10.1126/science.280.5367.1253 ↗
43. Adsorption of carbon nanotubes on active carbon microparticles10.1016/j.carbon.2008.03.010 ↗
44. Effects of quartz-based mine tailings on characteristics and leaching behavior of ultra-high performance concrete10.1016/j.conbuildmat.2018.01.087 ↗
45. Interlaminar fracture toughness of CFRP laminates incorporating multi-walled carbon nanotubes10.3390/polym7061020 ↗
46. Shape matters: synthesis and biomedical applications of high aspect ratio magnetic nanomaterials10.1039/C5NR01100K ↗