journal article·2019-02Open access

1-Year development trend of concrete compressive strength using Calcium Sulfoaluminate cement blended with OPC, PFA and GGBS

Jaime S.K. Yeung, Michael C.H. Yam, Y.L. Wong

Abstract

Abstract In recent years, Calcium Sulfoaluminate Cement (CSAC) has become widely used in concrete repair works due to its outstanding properties of volume stability and rapid strength gain. Nevertheless, with the increasing concerns on cost and the embodied carbon of concrete, people start considering the possibility of blended combination of CSAC with less costly Ordinary Portland Cement (OPC) and more environmental friendly binder materials like Pulverized Fuel Ash (PFA) or Ground Granulated Blastfurnace Slag (GGBS). However, due to the completely different hydration process of CSAC comparing with OPC, reactions of CSAC with these binder materials have not yet been fully understood so far through systematic research, notwithstanding that numerous studies have been done on the strength development trend of concrete with OPC blended with PFA or GGBS. The objective of this research is to determine the long-term strength development trend of concrete using different combinations of CSAC with OPC, PFA & GGBS and to derive empirical equations for predicting early and later strengths of concretes with various binder combinations incorporating CSAC at different ages. A test regime consisting of totally 20 concrete mixes was conducted to examine the effect of different binder combinations on the concrete compressive strength at different ages from 2 h up to one year (365 days). The test results show that with the same total binder content, concrete mixes with increasing percentage content of CSAC exhibit increasing early strength. For concrete mixes with combination of CSAC with PFA or GGBS only, their concrete compressive strengths at later ages drop significantly when OPC is not present. This is believed to be the result of lacking of calcium hydroxide, which is the hydration product of OPC, to activate the hydraulic properties of PFA or GGBS to contribute in strength development. Nevertheless, it is found that a small quantity down to 5% of OPC is already adequate to bring the long-term strength at 365 days up to the same order as that of ordinary pure OPC concrete. Equations are derived for the prediction of strength performance of concrete with various binder combinations at different ages for the consideration of engineers at design or planning stage. Outcome of this research is able to give a picture for the strength development trends of concretes with different percentage combinations of CSAC with commonly used binder materials. The derived equations also give valuable information at the design stage for engineers to determine suitable percentage of different binder materials in concrete to be used giving a balance of benefits in the aspects of strength performance at early and long-term stages as well as economic and environmental considerations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Use of calcium sulfoaluminate cement to improve strength of mortars at low temperature
2. New applications of calcium sulfoaluminate cement10.1016/j.cemconres.2003.10.019 ↗
3. Hydration of calcium sulfoaluminate cements – experimental findings and thermodynamic modeling10.1016/j.cemconres.2009.08.014 ↗
4. Discussion on the action duality of ettringite and its causing condition in concrete
5. Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of Portland slag cement10.1016/j.cemconcomp.2008.05.005 ↗
6. Effect of supplementary binder materials on the compressive strength and durability of short-term cured concrete10.1016/j.cemconres.2003.08.017 ↗
7. Durability of Portland blast-furnace slag cement concrete10.1016/S0958-9465(98)00032-8 ↗
8. High-performance cement matrices based on calcium sulfoaluminate-belite compositions10.1016/S0008-8846(01)00649-4 ↗
9. Efficiency of GGBS in concrete10.1016/S0008-8846(00)00271-4 ↗
10. An experimental study on optimum usage of GGBS for the compressive strength of concrete10.1016/j.cemconcomp.2007.01.001 ↗
11. Study progress for influence of different supplementary materials to the properties of calcium sulfoalumiante cement
12. Study on the improvement of later strength development of calcium sulfoaluminate cement”
13. R.K. Dhir, M.J. McCarthy, S. Zhou, P.A.J. Tittle, “Role of cement content in specification for concrete durability: cement type influences”, Structures & Buildings 157 Issue SB2, Specifications for concrete durability, Dhir et al., p. 113.10.1680/stbu.157.2.113.36479 ↗
14. Dachtar · 2004
15. Neville · 1995
16. Influence of fly as on the hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2017.02.030 ↗