Acoustic monitoring of timber structures: Influence of wood species under bending loading
Source abstract
Abstract
Abstract The use of wood in civil engineering structures, such as timber bridges, has been increasing in recent years. Unfortunately, our knowledge of their behaviour towards sustainability problems is far from complete and it is necessary to develop monitoring techniques like acoustic Emission (AE) that allow early identification of pathologies. This study focuses on the analysis of the influence of wood species on the acoustic response under bending loading. The results of this experimental study show a correlation between AE signal features and certain failure mechanisms but also that these acoustic signatures are different for each timber species.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Structural Health Monitoring Techniques · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Renaudin · 2017
2. Experimental validation of a 10-m-span composite UHPFRC–carbon fibers-timber bridge concept10.1061/(ASCE)BE.1943-5592.0000114 ↗
3. V.A. Trung Nguyen Multi-renforcement du bois lamellé-collé – Etude théorique et expérimentale, Doctoral Dissertation, Ecole Nationale des Ponts et Chaussées 2010 Paris, France
4. N. Godin P. Reynaud G. Fantozzi Emission acoustique et durabilité des composites ISTE Editions ISBN 2018 : 978-1-78405-434-210.51926/ISTE.9781784054342 ↗
5. Fracture process zone in concrete tension specimen10.1016/S0013-7944(99)00111-3 ↗
6. Fracture behavior and damage mechanisms identification of SiC/glass ceramic composites using AE monitoring10.1016/j.compscitech.2005.02.002 ↗
7. Experimental study of creep-damage in concrete by acoustic emission technique10.1617/s11527-012-9840-3 ↗
8. Damage detection in CFRP by coupling acoustic emission and infrared thermography10.1016/j.compositesb.2015.09.011 ↗
9. Acoustic emission from softwoods in tension10.1007/BF00351373 ↗
10. Acoustic emission characterization of flexural loading damage in wood10.1007/BF01161482 ↗
11. Mode I fracture and acoustic emission of softwood and hardwood10.1007/s002260000056 ↗
12. Monitoring the fracture of wood in torsion using acoustic emission10.1007/s10853-006-6292-6 ↗
13. Damage evolution in wood: synchrotron radiation micro-computed tomography (SRμCT) as complementary tool for interpreting acoustic emission (AE) behavior10.1515/hf-2014-0152 ↗
14. Acoustic emission technique for fracture analysis in wood materials10.1007/s10704-014-9985-x ↗
15. Probabilistic improvement of crack propagation monitoring by using acoustic emission
16. Venet · 1987
17. R.J. Ross, Wood handbook : wood as an engineering material, USDA Forest Service, Forest Products Laboratory, General Technical Report FPL- GTR-190, (2010) 509, https://doi.org/10.2737/FPL-GTR-19010.2737/FPL-GTR-190 ↗
18. Kolmann · 2012
19. NF B51-008, Solid wood – Static bending – Determination of ultimate strength in static bending using small clear specimens, AFNOR editions, 2017.
20. NF B51-002, Standard test method for physical and mechanical characteristics of wood, AFNOR editions, 1942.
21. Possible sources of acoustic emission during static bending test of wood specimen10.11118/actaun201260030199 ↗
22. Acoustic emission characteristics and felicity effect of wood fracture perpendicular to the grain
23. Nondestructive evolution of damage accumulation in tensile test specimens made from solid wood and layered wood materials10.1016/j.compstruct.2012.06.020 ↗
24. V, Bucur, Acoustics of wood, Springer Series in Wood Science ISBN 2006 978-3-540-30594-110.1007/3-540-30594-7 ↗
25. E.N. Landis, Acoustic Emission in Woods, in C. Grosse, M. Ohtsu (Eds), Acoustic Emission Testing, Springer-Verlag, 2008, pp. 311-322, ISBN 978-3-540-69895-1, https://doi.org/10.1007/978-3-540-69972-9.10.1007/978-3-540-69972-9 ↗
26. Damage evolution in wood under tensile loading monitored by acoustic emission
27. Characterization and calibration of acoustic emission sensors
28. Huguet · 2002
29. Foulon · 2015
30. Dynoc – A dynamic optimal cluster-seeking technique
31. J. Bodig, B. Jayne, Mechanics of wood and wood composites, Krieger Publishing Company, 1993, ISBN 978-0-894-64777-2.
32. G. Pluvinage La, rupture du bois et de ses composites Cépaduès-Editions ISBN 2005 978-2-85428-292-4
33. Damage evolution and acoustic emission of wood at tension perpendicular to fiber10.1007/s001070050482 ↗
34. Acoustic emission to assess and monitor the integrity of bridges10.1016/S0950-0618(00)00068-4 ↗