Glued-in rods in cross laminated timber – Numerical simulations and parametric studies
Source abstract
Abstract
Numerical simulations and parametric studies of glued-in rods in cross-laminated timber have been performed.\nThe simulations were based on 3D finite element analysis, using a cohesive surface model for the\nbond-lines between the laminations and the bond-line along the rod. The parametric studies investigated\nthe influence of the glued-in length, the rod diameter, and the rod-to-grain angle on the load-bearing\ncapacity and stiffness of the connection. The analyses showed that the load-bearing capacity generally\nincreases with the glued-in length and the rod diameter, which agrees well with experiments. For different\nrod-to-grain angles, different mechanical behaviour was observed, especially considering the failure\nmodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Wood Treatment and Properties · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Riberholt · 1986
2. Joints of glulam structures based on glued-in ribbed steel rods
3. Ehlbeck · 1987
4. Andersen · 2016
5. Koets · 2012
6. Untersuchungen zum Tragverhalten zur Faser in Nadelholz eingeleimte Stäben aus unterschiedlichen Materialen10.1007/BF02614343 ↗
7. Influence of specimen geometry on stress distributions in pull-out tests of glued-in steel rods in wood
8. Heat flow in a glulam joist with a glued-in steel rod subjected to variable ambient temperature
9. Pull-out behaviour of steel rods bonded into timber10.1007/BF02481558 ↗
10. Axial strength of glued in bolts – calculation model based on non linear fracture mechanics – a preliminary study
11. Glued-in rods for timber structures – a 3D model and finite element parameter studies10.1016/S0143-7496(00)00043-9 ↗
12. Fracture mechanics in timber engineering – strength analyses of components and joints10.1617/s11527-006-9121-0 ↗
13. Axial glued-in steel timber joints – experimental and numerical analysis10.1007/s00107-003-0450-1 ↗
14. Geometric parameters which affect the short term resistance of an axially loaded glued-in rod10.1617/s11527-006-9155-3 ↗
15. Influence of geometric and mechanical parameters on stress states caused by threaded rods glued in wood10.1007/s00107-013-0678-3 ↗
16. Mixed mode fracture of glued-in rods in timber structures10.1007/s10704-014-9986-9 ↗
17. Hybrid connections for timber structures10.1007/s00107-016-1024-3 ↗
18. Effect of glue-line thickness on pull-out behavior of glued-in GFRP rods in LVL: finite element analysis10.1016/j.polymertesting.2017.06.029 ↗
19. Rods glued in engineered hardwood products Part II: numerical modelling and capacity prediction
20. Effect of rod-to-grain angle on capacity and stiffness of axially and laterally loaded long threaded rods in timber joints10.1007/s00107-018-1314-z ↗
21. Withdrawal of pairs of threaded rods with small edge distances and spacings10.1007/s00107-016-1146-7 ↗
22. Numerical optimisation of novel connection for cross-laminated timber buildings10.1016/j.engstruct.2018.08.020 ↗
23. Experimental investigation of the axial strength of glued-in rods in cross laminated timber10.1617/s11527-018-1268-y ↗
24. Hibbitt · 2017
25. C. Sandhaas, Mechanical behaviour of timber joints with slotted-in steel plates, (2012).
26. CEN, EN 338:2016 Structural timber - strength classes, 2016.
27. Niemz · 2017
28. Dahl · 2009
29. Glued-in rods for timber structures – an experimental study of softening behaviour10.1007/BF02480593 ↗
30. Nonlinear shear properties of spruce softwood: numerical analyses of experimental results10.1016/j.compscitech.2009.05.011 ↗
31. Rolling shear properties of some european timber species with focus on cross laminated timber (CLT): Test configuration and parameter study
32. Cross laminated timber at in-plane beam loading – comparison of model predictions and FE-analyses10.1016/j.engstruct.2018.10.068 ↗
33. Comparison of design rules for glued-in rods and design rule proposal for implementation in European standards