Cyclic behavior of RC beam-column joints with epoxy resin and ground tire rubber as partial cement replacement
Source abstract
Abstract
Abstract The introduction of polymers in ordinary cement concrete in order to reduce the Portland cement consumption is gaining more attraction in the field of civil engineering. However, in order to promote the use of Polymer-Modified Concrete (PMC) in real works, in addition to the mechanical characterization of the material, the study of its structural behavior is necessary. Two Polymer Cement Concrete (PCC) with 5% and 15% of cement replacement (expressed in terms of polymer/cement mass ratio (p/c)) by Ground Tire Rubber and epoxy, respectively, have been considered. The above replacements of cement were considered as optimum in a previous research carried out by the authors. This paper reports the experimental behavior of Reinforced Concrete (RC) beam-column joints made with conventional and PCC subjected to quasi-static reversed cyclic loading. The specimens included a control, one reference specimen made of a traditional concrete, and another two ones in which the joint zone was casted with epoxy resin and ground rubber respectively as partial cement replacement. The influence of the two polymer-cement concretes on the overall structural behavior of the RC joints was studied in terms of load-carrying capacity, strength degradation, ductility, stiffness degradation, energy dissipation capacity, equivalent viscous damping ratio, joint damage level and pinching width ratio. The results revealed that the epoxy resin concrete exhibited a good structural behaviour. On the contrary, the results corresponding to ground tire rubber concrete discourage its use in structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Shear strength and hysteretic behavior of interior beam-column joints
2. Modelling of RC beam-column joints and structural walls10.1080/13632460109350387 ↗
3. A new model to simulate joint shear behavior of poorly detailed beam-column connections in RC structures under seismic loads, Part I: Exterior joints10.1016/j.engstruct.2010.12.026 ↗
4. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
5. Seismic behavior of hybrid fiber reinforced cementitious composite beam-column joints10.1016/j.matdes.2015.07.164 ↗
6. Application of PP-ECC in beam-column joint connections of rigid-framed railway bridges to reduce transverse reinforcements10.1016/j.engstruct.2015.01.005 ↗
7. 3D beam–column corner joints retrofitted with X-shaped FRP sheets attached via the EBROG technique10.1016/j.engstruct.2019.01.038 ↗
8. Flexural strengthening of reinforced concrete beam-column joints using innovative anchorage system10.14359/51700953 ↗
9. Effect of high-strength reinforcing bars and concrete on seismic behavior of RC beam-column joints10.1016/j.engstruct.2019.01.019 ↗
10. Behavior of Beam-Column Joints Made of Sustainable Concrete under Cyclic Loading10.1061/(ASCE)0899-1561(2006)18:5(650) ↗
11. The influence of recycled concrete aggregates on the behavior of beam-column joints under cyclic loading10.1016/j.engstruct.2013.12.024 ↗
12. Experimental behavior of beam-column joints made with EAF concrete under cyclic loading10.1016/j.engstruct.2017.02.038 ↗
13. Experimental and numerical investigation on the cyclic behavior of RC beam column joints with EAF slag concrete10.1016/j.engstruct.2017.09.022 ↗
14. Strength properties and molecular composition of epoxy-modified mortars10.1016/j.conbuildmat.2015.06.056 ↗
15. ACI548.3R-95, State of the art report on polymer-modified concrete., In: ACI Manual of Concrete Practice, Part-5. Famington Hills, USA: American Concrete Institute; p. 548.3R-1–548.3R-47., 2000.
16. Mechanical and dynamic properties of self-compacting crumb rubber modified concrete10.1016/j.conbuildmat.2011.07.013 ↗
17. A comprehensive review on the applications of waste tire rubber in cement concrete10.1016/j.rser.2015.10.092 ↗
18. Durability assessment of epoxy modified concrete10.1016/j.conbuildmat.2010.02.004 ↗
19. Polymer-modified pervious concrete for durable and sustainable transportation infrastructures10.1016/j.conbuildmat.2016.02.136 ↗
20. Epoxy resin and ground tyre rubber replacement for cement in concrete: Compressive behaviour and durability properties10.1016/j.conbuildmat.2018.04.004 ↗
21. Behaviour of beam–column joints made of recycled-aggregate concrete under cyclic loading10.1016/j.conbuildmat.2010.11.072 ↗
22. Seismic rehabilitation of beam-column joint using GFRP sheets10.1016/S0141-0296(02)00081-0 ↗
23. Strengthening and rehabilitation of RC beam-column joints using carbon-FRP jacketing and epoxy resin injection10.1002/eqe.785 ↗
24. G.M. Karayannis C.G., Chalioris, C. E. Sirkelis, Local retrofit of exterior RC beam–column joints using thin RC jackets—An experimental study Earthq. Eng. Struct. Dyn. 37 2008 727 74610.1002/eqe.783 ↗
25. Sika, (2017).
26. Pirozzolo · 2017
27. Tr · 1991
28. Use of tire rubber particles as addition to cement paste10.1016/S0008-8846(00)00373-2 ↗
29. European, Committee for Standardization, Eurocode 8: Design of structures for earthquake resistance. Part 1: General rules, seismic actions and rules for buildings EN 1998–1: 2004
30. European, Committee for Standardization, Eurocode 8: Design of structures for earthquake resistance. Part 3: Assessment and retrofitting of buildings EN 1998–3: 2005
31. A study on the size effect of RC beam-column connections under cyclic loading10.1016/j.engstruct.2015.03.052 ↗
32. Rehabilitation of reinforced concrete frame connections using corrugated steel jacketing
33. An experimental study on the effect of PET fibers on the behavior of exterior RC beam-column connection subjected to reversed cyclic loading10.1016/j.istruc.2015.11.003 ↗
34. Effect of fiber type on the behavior of cementitious composite beam-column joints under reversed cyclic loading10.1016/j.conbuildmat.2018.08.024 ↗
35. ACI 374.1-05, Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary 2014
36. Classification of failure mode and prediction of shear strength for reinforced concrete beam-column joints using machine learning techniques10.1016/j.engstruct.2018.01.008 ↗
37. Analytical Model for Predicting Shear Strength of Unreinforced Exterior Beam-Column Joints
38. Energy components in nonlinear dynamic response of SDOF systems10.1007/s11071-015-2208-9 ↗
39. Reinforced Concrete Beam-Column Joints Under Seismic Actions
40. Priestley · 1996
41. Mechanistic seismic damage model for reinforced concrete10.1061/(ASCE)0733-9445(1985)111:4(722) ↗
42. Enhancement of seismic performance of beam-column joint connections using high performance fiber reinforced cementitious composites10.1016/j.conbuildmat.2018.05.221 ↗
43. Behavior of RC exterior beam column joint retrofitted using UHP-HFRC10.1016/j.conbuildmat.2018.11.052 ↗
44. E.V. Villemure I., Damage indices for reinforced concrete frames: evaluation and correlation Dep. Civ. Eng. Master of 1995
45. Flexural deformation capacity of rectangular RC columns determined by the CAE method10.1002/eqe.584 ↗
46. Effect of lap splices on flexural resistance and cyclic deformation capacity of RC members10.1002/best.200710105 ↗
47. Damage estimation of existing bridge structures
48. Key influence parameters for the joint shear behaviour of reinforced concrete (RC) beam–column connections10.1016/j.engstruct.2006.12.012 ↗
49. Experimental assessment of unreinforced exterior beam-column joints with deformed bars10.1016/j.engstruct.2016.01.016 ↗
50. Parameters for shear strength prediction of exterior beam-column joints without transverse reinforcement10.1016/j.engstruct.2011.11.017 ↗
51. M.J.N. Priestley, Displacement-Based Seismic Assessment of Reinforced Concrete Buildings, 1997. doi:10.1080/13632469708962365.10.1080/13632469708962365 ↗
52. Experimental investigation of the efficacy of EBROG method in seismic rehabilitation of deficient reinforced concrete beam-column joints using CFRP sheets10.1061/(ASCE)CC.1943-5614.0000781 ↗