journal article·2019-07

Thermal bridging analysis of connections in cross-laminated timber buildings based on ISO 10211

Seong Jin Chang, Seunghwan Wi, Sumin Kim

Publisher page

Abstract

Abstract Cross-laminated timber (CLT), developed in Europe for the utilization of low-grade wood, is an engineered wood product (EWP) with high carbon storage and low carbon emissions. CLT wooden houses have advantages such as reduction of greenhouse gases, shortening of construction period through precast and modular construction, improved of insulation performance and airtight performance, the realization of the high-rise wooden house. In this study, ply-laminate cross-laminated timber (ply-lam CLT) was prepared using domestic plywood as the core material of CLT, and the thermal properties and heat transfer performance of ply-lam CLT were analyzed. The thermal conductivities of the ply-lam CLT in the radial, tangential, and longitudinal directions were 0.104 W/(m K), 0.111 W/(m K), and 0.122 W/(m K), respectively. The results of the heat transfer analysis through ISO 10211 indicated that the ply-lam CLT walls had lower thermal bridges than wood frame structure walls. Moreover, the ply-lam CLT walls with exterior insulation had lower thermal bridges. In addition, the self-tapping screw (STS) joining method on all connections was able to maintain excellent insulation performance because of low thermal transmittance coefficient. In addition, it should be noted that the STS applied from inside overlapped with the geometric thermal bridges.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Masonry and Concrete Structural Analysis · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Analysis of cooling and heating energy demands of wooden houses with cross-laminated timber (CLT) using domestic plywood as core materials10.21086/ksles.2017.12.24.6.752 ↗
2. Application of wood and wooden architecturein order to save construction energy
3. Development of cross laminated timber using domestic Korean wood
4. Experimental and numerical investigation of short-term behaviour of CLT-steel composite beams10.1016/j.engstruct.2017.04.052 ↗
5. Numerical study on the elastic buckling of cross-laminated timber walls subject to compression10.1016/j.conbuildmat.2018.12.013 ↗
6. A review of structural, thermo-physical, acoustical, and environmental properties of wooden materials for building applications10.1016/j.buildenv.2016.12.033 ↗
7. Feasibility study to estimate the environmental benefits of utilising timber to construct high-rise buildings in Australia10.1016/j.buildenv.2018.09.052 ↗
8. Study of strengthening solutions for glued-laminated wood beams of maritime pine wood10.1016/j.conbuildmat.2009.02.042 ↗
9. E. Karacabeyli, B. Douglas, CLT handbook – US edition, 2013. doi:10.1017/CBO9781107415324.004.10.1017/CBO9781107415324.004 ↗
10. Hygrothermal performance of cross-laminated timber wall assemblies: a stochastic approach10.1016/j.buildenv.2015.11.034 ↗
11. A novel method for non-linear design of CLT wall systems10.1016/j.engstruct.2017.09.010 ↗
12. Analysis of airborne sound reduction index of bare Clt predictive method of sound
13. Analysis of acoustic behavior of bare CLT floors for the evaluation of impact sound insulation improvement
14. Trade incentives for importers to adopt policies to address illegally logged timber: the case of non-tropical hardwood plywood
15. LENO Cross Laminated Timber (CLT), (2015).
16. DIN, 4108-2 Thermal protection and energy economy in buildings - Part 2: Minimum requirements to thermal insulation, 2013.
17. ISO, 10211 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations, 2017.
18. ISO, 14683 Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values, 2017.
19. A study on the thermal-bridge-free construction details of the thermal envelope for a passive house using heat transfer simulation
20. Ministry of Land Infrastructure and Transport, The statistics on the construction status of wooden houses, 2018.
21. Korea Forest Service, The statistics on the amount of supply and self-sufficiency rate of wood, 2016.
22. The air emission assessment of a South Korean traditional building during its life cycle10.1016/j.buildenv.2016.06.007 ↗
23. Recent rising temperatures drive younger and southern Korean pine growth decline10.1016/j.scitotenv.2018.08.393 ↗
24. Hygrothermal performance of cross-laminated timber wall assemblies with built-in moisture: field measurements and simulations10.1016/j.buildenv.2013.09.008 ↗
25. Hygrothermal risks of using exterior air barrier systems for highly insulated light weight walls: a laboratory investigation10.1016/j.buildenv.2012.03.007 ↗
26. Modeling the hygrothermal performance of selected North American and comparable European wood-frame house walls10.1016/j.enbuild.2012.02.003 ↗
27. Analysis of mechanical properties of cross-laminated timber (CLT) with plywood using Korean Larch10.15376/biores.13.2.2715-2726 ↗
28. Suggestion of thermal environment miniature for evaluation of heating efficiency based on thermal conductivity measurement method of building materials10.5658/WOOD.2011.39.3.269 ↗
29. ISO, 22007-2 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method, 2008.
30. Effusivity sensor package (ESP) system for process monitoring and control
31. Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials10.1063/1.1142087 ↗
32. Numerical analysis of hygrothermal properties and behavior of Korean based cross-laminated timber (CLT) wall system to deduce optimal assemblies10.1016/j.jclepro.2018.12.221 ↗
33. ISO, 6946 Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods, 2017.
34. Ministry of Land Infrastructure and Transport, Energy saving design standard of building, 2017.
35. Lee · 2017
36. Determination of fire resistance ratings for glulam connectors within US high rise timber buildings10.1016/j.firesaf.2017.04.028 ↗
37. Measurement of flanking transmission for the characterisation and classification of cross laminated timber junctions10.1016/j.apacoust.2018.07.009 ↗
38. High-intensity microwave wood modification for increasing permeability
39. Thermal conductivity of wood at angles to the principal anatomical directions10.1007/s00226-015-0716-x ↗
40. The influence of nitrogen doping on thermal conductivity of carbon nanotubes10.1016/j.tca.2015.08.034 ↗
41. Sustainable one-part geopolymer foams with glass fines versus sand as aggregates10.1016/j.conbuildmat.2018.03.120 ↗