journal article·2019-08

Effect of polypropylene fibers on bond performance of reinforcing bars in high strength concrete

Z.H. Mohebi, A.B. Bahnamiri, M. Dehestani

Publisher page

Abstract

Abstract Adequate bonding between reinforcement and concrete plays a vital role in the proper performance of reinforced concrete as a composite material. Hence it is important to evaluate the influence of various factors on the bond behavior of reinforcement and concrete. In this study, a total of 8 beam specimens with tension lap splice at the midspan and 12 concentric pullout specimens are fabricated to investigate the effect of polypropylene fibers on bond performance of reinforcement in high strength concrete (HSC). Fibers are added to concrete mixture by 0.15%, 0.30% and 0.45% volume fraction of concrete. The detrimental effect of polypropylene fiber on the workability of mixture restricts the use of a high amount of polypropylene fiber in mixtures. Splice specimens made of fiber reinforced concrete presented a greater number of cracks, higher failure loads and deflections and also larger crack width at their failure stage. Failure deflections of splice specimens made of fiber reinforced concrete are 20% higher than that of plain concrete specimens on average. After splitting failure, load carrying capacity of all beam specimens dropped to almost zero and the addition of polypropylene fibers did not provide residual capacity for the specimens. The slope of the bond stress-slip curves of specimens experiences a sudden change at the cracking load. Results indicate that existing prediction equations for bond strength are acceptable and even yield more accurate values when polypropylene fibers are added to concrete mixtures. The results of beam and pullout tests demonstrated that pullout test is not suitable to evaluate the effect of polypropylene fibers on bond strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Caldarone · 2014
2. ACI Committee 363, “Report on High-Strength Concrete (ACI 363R-10),” American Concrete Institute, Farmington Hills, MI, 2010, 69 pp.
3. Effects of silica fume and aggregate size on the brittleness of concrete10.1016/0008-8846(95)00180-8 ↗
4. Fracture mechanical properties of high-performance concrete—influence of silica fume10.1007/BF02480535 ↗
5. Mechanical and durability evaluation of fiber-reinforced self-compacting concrete10.1016/j.conbuildmat.2016.05.127 ↗
6. Fracture properties of steel fiber reinforced high strength concrete using work of fracture and size effect methods10.1016/j.conbuildmat.2017.03.089 ↗
7. Mechanical properties of polypropylene hybrid fiber-reinforced concrete10.1016/j.msea.2008.05.037 ↗
8. Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete10.1617/s11527-007-9341-y ↗
9. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
10. The effects of polypropylene fibers on the properties of reinforced concrete structures10.1016/j.conbuildmat.2011.08.015 ↗
11. Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
12. Post-yield bond behaviour of deformed bars in high-strength self-compacting concrete10.1016/j.conbuildmat.2013.02.072 ↗
13. Bond behavior of reinforcement in conventional and self-compacting concrete10.1260/1369-4332.15.12.2033 ↗
14. Bond of self-compacting concrete incorporating silica fume: Top-bar effect, effects of rebar distance from casting point and of rebar-to-concrete relative displacements during setting10.1016/j.conbuildmat.2014.09.113 ↗
15. Bond behaviour of normal/recycled concrete and corroded steel bars10.1016/j.conbuildmat.2013.06.091 ↗
16. ACI 408 Committee. “Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03).” American Concrete Institute, Detroit, Michigan, US (2003): 49.
17. FIB (Fédération Internationale du Béton). “Bond of reinforcement in concrete.” FIB Bulletin 10 (2000).
18. Concrete–reinforcement bond in different concrete classes10.1016/j.conbuildmat.2012.04.074 ↗
19. Bond of reinforcing bars to steel fiber reinforced concrete10.1016/j.conbuildmat.2015.12.044 ↗
20. Top-bar effect of steel bars in self-consolidating concrete (SCC)10.1016/j.cemconcomp.2007.05.012 ↗
21. A comparative study of the bond strength of reinforcing steel in high-volume fly ash concrete and conventional concrete10.1016/j.conbuildmat.2012.11.105 ↗
22. Bond strength and development length of steel bar in unconfined self-consolidating concrete10.1016/j.engstruct.2016.10.029 ↗
23. Bond performance of reinforcing bars embedded in high-strength concrete
24. Building Code Requirements for Structural Concrete (ACI 318–11M) and Commentary
25. A reevaulation of test data on development length and splices
26. Effect of transverse reinforcement on bond strength of reinforcing bars in silica fume concrete10.1007/BF02482719 ↗
27. Influence of transverse reinforcement on bond strength of tensile splices10.1016/S0958-9465(00)00005-6 ↗
28. Development length criteria: bars not confined by transverse reinforcement
29. Local bond strength of reinforcing bars in normal strength and high-strength concrete (HSC)
30. Bond between normal strength and high-strength concrete (HSC) and reinforcing bars in splices in beams
31. Darwin · 1995
32. Splice strength of conventional and high relative rib area bars in normal and high-strength concrete
33. Effect of fibers on development/splice strength of reinforcing bars in tension
34. Effect of fiber reinforcement on bond strength of tension lap splices in high-strength concrete
35. Bond-slip response of reinforcing bars embedded in plain and fiber concrete10.1061/(ASCE)0899-1561(2002)14:6(503) ↗
36. Bond strength of mild steel in polypropylene fiber reinforced concrete
37. ASTM C39/C39M-18, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2018, www.astm.org.
38. ASTM C192/C192M-16a, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, PA, 2016, www.astm.org.