journal article·2019-12

Ambient- and oven-cured geopolymer concretes under active confinement

Aliakbar Gholampour, Togay Ozbakkaloglu, Ching-Tai Ng

Publisher page

Abstract

Abstract The axial compressive behavior of actively confined geopolymer concretes (GPCs) is investigated in this study. Two different batches of GPCs were manufactured using either 80% fly ash (FA)/20% ground granulated blast furnace slag (GGBS) (80/20 series) or 50% FA/50% GGBS (50/50 series). Two different curing conditions of ambient (at 23 °C) and oven (at 70 °C) curing were considered to evaluate the influence of the curing condition on the axial compressive behavior of actively-confined GPCs. Geopolymer concretes were confined by a Hoek cell at different confining pressures ranging from 5 to 25 MPa. Axial compression tests were conducted on unconfined and actively confined specimens to investigate the influence of the composition of the GPC mix, curing condition, and confining pressure on the behavior of GPCs. It is found that 50/50 series mixes exhibit slightly higher axial peak stress and strain than 80/20 series mixes. The results also show that oven-cured GPCs exhibit a slightly higher axial strength but a slightly lower peak axial strain than ambient-cured GPCs. At a given confining pressure, the GGBS content and curing condition also affect the trend of descending branch of the axial stress-axial strain curve of GPCs. The descending branch slope of GPCs tends to decrease with an increase in GGBS content, and oven-cured GPCs exhibit a slightly steeper descending branch than their ambient-cured counterparts. It is also found that, at a given axial strain, GPCs with a higher GGBS content develop a slightly higher lateral strain, indicating the increased dilation rate of GPCs at a higher GGBS content. These promising findings indicate the possibility of the use of GPC in structural columns in which the concrete will be subjected to lateral confinement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Tools for reducing carbon emissions due to cement consumption
2. Generalized fracture toughness and compressive strength of sustainable concrete including low calcium fly ash10.3390/ma10121393 ↗
3. Performance of sustainable concretes containing very high volume Class-F fly ash and ground granulated blast furnace slag10.1016/j.jclepro.2017.06.087 ↗
4. The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures10.1016/j.jclepro.2015.02.050 ↗
5. A review of the multi-component utilisation of coal fly ash10.1016/j.fuel.2012.03.024 ↗
6. Utilization of steel slag for Portland cement clinker production10.1016/j.jhazmat.2007.07.093 ↗
7. Environmental concrete – geopolymer of construction
8. Experimental and numerical investigations on the flexural performance of geopolymers reinforced with short hybrid polymeric fibres10.1016/j.compositesb.2017.06.001 ↗
9. Ambient-cured geopolymer mortars prepared with waste-based sands: Mechanical and durability-related properties and microstructure10.1016/j.compositesb.2018.12.057 ↗
10. On the development of fly ash-based geopolymer concrete
11. Effect of elevated temperatures on geopolymer paste, mortar and concrete10.1016/j.cemconres.2009.10.017 ↗
12. Effect of types of curing on strength of geopolymer concrete
13. Mechanical properties of fly-ash-based geopolymer concrete
14. The mechanical properties of fly ash-based geopolymer concrete with alkaline activators10.1016/j.conbuildmat.2013.05.069 ↗
15. Fracture behaviour of heat cured fly ash based geopolymer concrete10.1016/j.matdes.2012.08.005 ↗
16. Stress–strain behaviour of confined Geopolymer concrete10.1016/j.conbuildmat.2014.09.092 ↗
17. Mechanical behavior of geopolymer concrete subjected to high strain rate compressive loadings10.1617/s11527-014-0322-7 ↗
18. Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature10.1016/j.ceramint.2015.01.031 ↗
19. Influence of coal ash properties on compressive behaviour of FA-and BA-based GPC10.1680/macr.14.00429 ↗
20. Mechanical properties of alkali-activated concrete: A state-of-the-art review10.1016/j.conbuildmat.2016.09.121 ↗
21. Response of alkali activated low calcium fly-ash based geopolymer concrete under compressive load at elevated temperatures10.1617/s11527-016-0877-6 ↗
22. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
23. Geopolymer concrete: A review of some recent developments10.1016/j.conbuildmat.2015.03.036 ↗
24. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers10.1016/j.cemconres.2009.10.010 ↗
25. Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature10.1016/j.conbuildmat.2013.05.107 ↗
26. Compressive strength of high strength class C fly ash-based geopolymers with reactive granulated blast furnace slag aggregates designed by Taguchi method10.1016/j.matdes.2013.07.035 ↗
27. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
28. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
29. Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer10.1016/j.conbuildmat.2015.05.001 ↗
30. Physical–mechanical and microstructural properties of alkali-activated fly ash–blast furnace slag blends10.1016/j.ceramint.2014.09.075 ↗
31. Ductility enhancement of geopolymer concrete columns using fibre-reinforced polymer confinement10.1177/0021998315597553 ↗
32. Fracture properties of GGBFS-blended fly ash geopolymer concrete cured in ambient temperature10.1617/s11527-016-0893-6 ↗
33. An Experimental Investigation of the Stress-Strain Behaviour of Geopolymer Concrete10.2478/sjce-2018-0011 ↗
34. Investigation of engineering properties of normal and high strength fly ash based geopolymer and alkali-activated slag concrete compared to ordinary Portland cement concrete10.1016/j.conbuildmat.2018.11.083 ↗
35. Investigation of the influence of the application path of confining pressure: Tests on actively confined and FRP-confined concretes10.1061/(ASCE)ST.1943-541X.0001177 ↗
36. Stress–strain model for normal-and light-weight concretes under uniaxial and triaxial compression10.1016/j.conbuildmat.2014.08.050 ↗
37. RC columns of square section–passive and active confinement with composite ropes10.1016/j.compositesb.2013.11.011 ↗
38. Finite-element modeling of actively confined normal-strength and high-strength concrete under uniaxial, biaxial, and triaxial compression10.1061/(ASCE)ST.1943-541X.0001589 ↗
39. Behavior of rubberized concrete under active confinement10.1016/j.conbuildmat.2017.01.105 ↗
40. Triaxial test for concrete under non-uniform passive confinement10.1016/j.conbuildmat.2017.02.032 ↗
41. Fiber-reinforced concrete containing ultra high-strength micro steel fibers under active confinement10.1016/j.conbuildmat.2018.07.042 ↗
42. Behavior of steel fiber-reinforced concrete-filled FRP tube columns: Experimental results and a finite element model10.1016/j.compstruct.2018.03.094 ↗
43. Evaluation of peak and residual conditions of actively confined concrete using neuro-fuzzy and neural computing techniques10.1007/s00521-016-2492-4 ↗
44. Understanding the compressive behavior of shape memory alloy (SMA)-confined normal-and high-strength concrete10.1016/j.compstruct.2018.05.008 ↗
45. Geopolymer concrete-filled FRP tubes: Behavior of circular and square columns under axial compression10.1016/j.compositesb.2016.04.013 ↗
46. ASTM-C1437-15, Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA, 2015.
47. ASTM-C39/C39M-16b, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2016.
48. Alkali-activated fly ash/slag cements: strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
49. Effects of curing temperature and NaOH addition on hydration and strength development of clinker-free CKD-fly ash binders10.1016/j.cemconres.2003.08.003 ↗
50. Effect of temperature and aging on the mechanical properties of concrete – Part I. Experimental results10.1016/S0008-8846(02)00744-5 ↗
51. Comparison of the properties between high-volume fly ash concrete and high-volume steel slag concrete under temperature matching curing condition10.1016/j.conbuildmat.2015.08.134 ↗
52. A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites10.1016/j.conbuildmat.2014.02.005 ↗
53. Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder10.1023/A:1025904905176 ↗
54. P. Nath, P.K. Sarker, Geopolymer concrete for ambient curing condition, Australasian Structural Engineering Conference 2012: The past, present and future of structural engineering, Engineers Australia, 2012, p. 225.