journal article·2019-12

Effects of polycarboxylate superplasticizers on fluidity and early hydration in sulfoaluminate cement system

Hongwei Tian, Xiangming Kong, Yong Cui, Qibao Wang, Dongmin Wang

Publisher page

Abstract

Abstract Three polycarboxylate superplasticizers with varied molecular structure, denoted as PCE4, PCE22 and PCE25 were synthesized by radical copolymerizing acrylic acid (AA) and α-methallyl-ω-hydroxy poly (ethylene glycol) with monomer ratio of 4, 22 and 25 respectively. 2-Acrylamido-2-methylpropane sulfonic acid was used to partly replace AA in basis of PCE22 for preparation of PCE18S4. Flow test and adsorption measurement reveal that the higher charged PCE22 and PCE18S4 exhibit stronger adsorption capability on mineral surfaces and hence better fluidizing effect than the lower charged PCE4. Although PCE25 exhibits sufficient adsorption, its dispersion capability is inferior because of the lower side chain density which leads the polymer prone to be crosslinked by Ca2+ ions present in pore solution. As shown in the measurements by XRD, BET and calorimetry, the polymers with higher carboxylate content show stronger suppressive effect on ettringite formation and cement hydration and hence perform better in fluidity retention.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. A hydration study of various calcium sulfoaluminate cements10.1016/j.cemconcomp.2014.07.002 ↗
2. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
3. Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement10.1016/j.conbuildmat.2016.09.019 ↗
4. Investigation of the microstructure and carbonation of CS–A-based concretes removed from service10.1016/j.cemconres.2004.08.007 ↗
5. Influence of the calcium sulphate source on the hydration mechanism of Portland cement–calcium sulphoaluminate clinker–calcium sulphate binders10.1016/j.cemconcomp.2011.03.005 ↗
6. Influence of a thermal cycle at early age on the hydration of calcium sulphoaluminate cements with variable gypsum contents10.1016/j.cemconres.2010.10.001 ↗
7. Rheological and hydration characterization of calcium sulfoaluminate cement pastes10.1016/j.cemconcomp.2012.01.008 ↗
8. Early age hydration of calcium sulfoaluminate (synthetic ye'elimite) in the presence of gypsum and varying amounts of calcium hydroxide10.1016/j.cemconres.2013.03.001 ↗
9. Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate10.1016/j.cemconres.2013.11.011 ↗
10. Industrially interesting approaches to “low-CO2” cements10.1016/j.cemconres.2004.01.021 ↗
11. Sustainable development and climate change initiatives10.1016/j.cemconres.2007.09.008 ↗
12. Hydration of calcium sulfoaluminate cements—experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
13. Effect of raw mix design and of clinkering process on the formation and mineralogical composition of (ternesite) belite calcium sulphoaluminate ferrite clinker10.1016/j.cemconres.2014.02.004 ↗
14. A simplified view on chemical effects perturbing the action of superplasticizers10.1016/S0008-8846(01)00534-8 ↗
15. Compatibility between superplasticizer admixtures and cements with mineral additions10.1016/j.conbuildmat.2011.12.092 ↗
16. Change in reaction kinetics of a Portland cement caused by a superplasticizer—Calculation of heat flow curves from XRD data10.1016/j.cemconres.2011.10.005 ↗
17. A contribution to the explanation of the action principles of organic plasticizers10.1016/j.cemconres.2004.07.014 ↗
18. Controlling of the adsorption and dispersing force of polycarboxylate-type superplasticizer by sulfate ion concentration in aqueous phase10.1016/S0008-8846(00)00503-2 ↗
19. Occurrence of intercalation of PCE superplasticizers in calcium aluminate cement under actual application conditions, as evidenced by SAXS analysis10.1016/j.cemconres.2013.09.002 ↗
20. Effect of borax on rheology of calcium sulphoaluminate cement paste in the presence of polycarboxylate superplasticizer10.1016/j.conbuildmat.2017.02.005 ↗
21. Compatibility between a polycarboxylate superplasticizer and the belite-rich sulfoaluminate cement: setting time and the hydration properties10.1016/j.conbuildmat.2013.10.028 ↗
22. Effects of the chemical structure of polycarboxy-ether superplasticizer on its performance in sulphoaluminate cement10.1080/01932691.2010.488132 ↗
23. Synthesis and properties of an amphoteric polycarboxylic acid-based superplasticizer used in sulfoaluminate cement10.1002/app.35565 ↗
24. Fluidizing efficiency of comb-like superplasticizers: The effect of the anionic function, the side chain length and the grafting degree10.1016/j.cemconres.2015.02.001 ↗
25. Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts10.1016/j.cemconcomp.2009.01.005 ↗
26. Calcium complexation and cluster formation as principal modes of action of polymers used as superplasticizer in cement systems10.1016/j.cemconres.2015.01.016 ↗
27. Comparative study of two PCE superplasticizers with varied charge density in Portland cement and sulfoaluminate cement systems10.1016/j.cemconres.2018.10.003 ↗
28. Comb polymer architecture effects on the rheological property evolution of concentrated cement suspensions10.1111/j.1551-2916.2004.01643.x ↗
29. Determination of the adsorbed layer thickness of functional anionic polymers utilizing chemically modified polystyrene nanoparticles10.1016/j.colsurfa.2014.05.014 ↗
30. Hydrophobic associated polymer “grafted onto” nanosilica as a multi-functional fluid loss agent for oil well cement under ultrahigh temperature10.1039/C6RA12618A ↗
31. Influence of pH on the behavior of lignosulfonate macromolecules in aqueous solution10.1016/j.colsurfa.2010.08.062 ↗
32. Method to assess the quality of casein used as superplasticizer in self-levelling compounds10.1016/j.cemconres.2010.01.005 ↗
33. Study on the performance of polycarboxylate-based superplasticizers synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization10.1016/j.molstruc.2016.05.035 ↗
34. Synthesis of nanoSiO 2 @PCE core-shell nanoparticles and its effect on cement hydration at early age10.1016/j.conbuildmat.2016.03.093 ↗
35. Impact of sample preparation on the specific surface area of synthetic ettringite10.1016/j.cemconres.2016.04.005 ↗
36. Molecular and submolecular scale effects of comb-copolymers on tri-calcium silicate reactivity: toward molecular design10.1111/jace.14695 ↗
37. Influence of hydration on the fluidity of normal Portland cement pastes10.1016/j.cemconres.2008.03.003 ↗
38. Reliable specific surface area measurements on anhydrous cements10.1016/j.cemconres.2014.10.009 ↗
39. Basics of analytical methods used for the investigation of interaction mechanism between cements and superplasticizers10.1016/j.cemconres.2011.03.007 ↗
40. Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes10.1016/j.cemconres.2014.11.009 ↗
41. Poly(carboxylate ether)-based superplasticizer achieves workability retention in calcium aluminate cement10.1038/srep41743 ↗
42. Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption10.1016/j.cemconres.2014.07.024 ↗
43. Comb-like polymers inside nanoscale pores10.1016/S0001-8686(01)00062-8 ↗
44. Experimental determination of the thermodynamic parameters affecting the adsorption behaviour and dispersion effectiveness of PCE superplasticizers10.1016/j.cemconres.2009.12.002 ↗
45. Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes10.1016/j.cemconres.2014.10.004 ↗
46. Effects of comb-shaped superplasticizers with different charge characteristics on the microstructure and properties of fresh cement pastes10.1016/j.conbuildmat.2017.08.087 ↗
47. Competitive adsorption between superplasticizer and retarder molecules on mineral binder surface10.1016/j.cemconres.2007.12.003 ↗
48. Adsorption characteristics of superplasticizers on cement component minerals10.1016/S0008-8846(02)00782-2 ↗
49. Impact of zeta potential of early cement hydration phases on superplasticizer adsorption10.1016/j.cemconres.2007.01.007 ↗
50. Cation-induced collapse of low-molecular-weight polyacrylic acid in the dispersion of barium titanate10.1006/jcis.2002.8557 ↗
51. Precipitation of highly charged polyelectrolyte solutions in the presence of multivalent salts10.1063/1.470459 ↗
52. Hydration of calcium sulfoaluminate cement at less than 24 h10.1680/adcr.2002.14.4.141 ↗
53. Studies on the early hydration of two modifications of ye’elimite with gypsum10.1016/j.cemconres.2016.11.009 ↗
54. Influence of calcium sulfate and calcium hydroxide on the hydration of calcium sulfoaluminate clinker
55. Effects of polycarboxylate superplasticizers with different molecular structure on the hydration behavior of cement paste10.1016/j.conbuildmat.2015.12.178 ↗
56. Effect of sodium tripolyphosphate on adsorbing behavior of polycarboxylate superplasticizer10.1016/j.conbuildmat.2016.09.077 ↗
57. ICP-OES method for the characterization of cement pore solutions and their modification by polycarboxylate-based superplasticizers10.1016/j.cemconres.2016.10.007 ↗
58. Thomas · 2015
59. Hirsch · 2005
60. Impact of different types of polycarboxylate superplasticisers on spontaneous crystallisation of ettringite10.1680/jadcr.15.00114 ↗
61. Formation of nano-sized ettringite crystals identified as root cause for cement incompatibility of PCE superplasticizers10.1007/978-3-319-17088-6_6 ↗
62. Adsorption of polyelectrolytes and its influence on the rheology, zeta potential, and microstructure of various cement and hydrate phases10.1016/j.jcis.2008.04.052 ↗
63. Influence of solution chemistry on the hydration of polished clinker surfaces—a study of different types of polycarboxylic acid-based admixtures10.1016/S0008-8846(01)00654-8 ↗
64. The microstructure of dispersed and non-dispersed fresh cement pastes—new insight by cryo-microscopy10.1016/j.cemconres.2007.11.007 ↗