journal article·2019-12

Behaviours of stub steel tubular columns subjected to axial compression at low temperatures

Jia-Bao Yan, Xin Dong, Jin-Song Zhu

Publisher page

Abstract

Abstract This paper reports the compressive behaviour of stub steel tubes at the low temperatures relating to cold-region environment. Axial compression tests were performed on 12 circular and 16 square/rectangular stub steel tubular columns at different temperatures of 20, −30, −60 and −80 °C. Including the low temperature levels, different D/t ratios were also studied for circular and square stub steel columns at low temperatures. The test results reported detailed information on failure modes, load-shortening behaviours, and strengths of stub steel tubular columns at low temperatures. Effects of low temperatures and wall thickness (i.e., slenderness ratio of the tube) on compressive behaviours of stub steel tubular columns were extensively analysed and discussed. The test results also revealed that current slenderness limit for Class 3 type of square cross section is less conservative at low temperatures due to that the increased yield strength delays the occurrence of local buckling. Modified prediction equations in Eurocode 3, AISC 360-10, and GB50018 were adopted to predict the ultimate compressive resistance of stub steel tubular columns at 20 ∼ −80 °C environmental low temperature. Their accuracies were also validated by 28 test results in this paper. Some conclusions were then drawn through these experimental and analytical studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Fire effects on concrete materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Experimental observations on the ice pile-up in the conductor array of a jacket platform in Bohai Sea10.1016/j.oceaneng.2017.05.036 ↗
2. Evaluation of ice-induced fatigue life for a vertical offshore structure in the Bohai Sea10.1016/j.coldregions.2018.05.012 ↗
3. J. Wardenier, J.A. Packer, X.-L. Zhao, G.J. van der Vegte, Hollow sections in structural applications. Printed by Bouwen met Staal. Boerhaavelaan 40, 2713 HX Zoetermeer, The Netherlands.
4. Axial compressive behavior of square ice filled steel tubular stub columns10.1016/j.conbuildmat.2018.08.111 ↗
5. Behavior of innovative circular ice filled steel tubular stub columns under axial compression10.1016/j.conbuildmat.2018.03.208 ↗
6. Influence of low temperature on dynamic behavior of concrete10.1016/j.conbuildmat.2016.04.046 ↗
7. Assessment of undiscovered oil and gas in the arctic10.1126/science.1169467 ↗
8. Column behavior of cold-formed hollow sections10.1061/(ASCE)0733-9445(1988)114:2(390) ↗
9. Behavior of square hollow steel tubes and steel tubes filled with concrete10.1016/j.tws.2007.07.009 ↗
10. Cold-formed steel oval hollow sections under axial compression10.1061/(ASCE)ST.1943-541X.0000337 ↗
11. Comparative experimental study of hot-rolled and cold-formed rectangular hollow sections10.1016/j.tws.2010.02.003 ↗
12. Material properties and compressive local buckling response of high strength steel square and rectangular hollow sections10.1016/j.engstruct.2016.10.023 ↗
13. Tests and numerical study of ultra-high strength steel columns with end restraints10.1016/j.jcsr.2011.10.027 ↗
14. Experimental and numerical study on the behavior of axially compressed high strength steel box-columns10.1016/j.engstruct.2013.10.013 ↗
15. Buckling of stainless steel square hollow section compression members10.1016/S0143-974X(02)00031-7 ↗
16. Local buckling of thin-walled stainless steel members
17. Experiments on stainless steel hollow sections—part 1: material and cross-sectional behavior10.1016/j.jcsr.2003.11.006 ↗
18. A comparative experimental study between stiffened and unstiffened stainless steel hollow tubular stub columns10.1016/j.tws.2008.05.008 ↗
19. Structural response of stainless steel oval hollow section compression members10.1016/j.engstruct.2008.12.002 ↗
20. Behavior of cold-formed high strength stainless steel sections10.1061/(ASCE)0733-9445(2005)131:11(1738) ↗
21. Experimental behavior of CFST stub columns after being exposed to freezing and thawing10.1016/j.coldregions.2013.01.005 ↗
22. The strength of stud shear connectors at low temperatures10.1139/l83-070 ↗
23. Shear behaviour of headed stud connectors at low temperatures relevant to the Arctic environment10.1061/(ASCE)ST.1943-541X.0002149 ↗
24. Compressive behaviours of novel steel-concrete-steel sandwich walls at low temperatures10.1016/j.conbuildmat.2019.02.116 ↗
25. Bond behaviour of concrete-filled steel tubes at the Arctic low temperatures10.1016/j.conbuildmat.2019.03.168 ↗
26. GB/T228.1—2010 Metallic materials: tensile testing, China Planning Press, Beijing, 2010 (in Chinese).
27. Mechanical properties of mild steel and high strength steel S690 under low temperature relevant to Arctic environment10.1016/j.matdes.2014.04.057 ↗
28. ACI 318M–2005. Building Code Requirements for Structural Concrete and Commentary, Farmigton Hills, Michigan, USA, 2005.
29. Compressive behaviour of normal weight concrete confined by the steel face plates in SCS sandwich wall10.1016/j.conbuildmat.2018.03.143 ↗
30. EN 1993-1-1, Eurocode 3—Design of Steel Structures. Part 1-1, General Rules and Rules for Buildings, CEN Brussels, 2005.
31. ANSI/AISC 360-10, Specification for Structural Steel Buildings, AISC, Chicago, 2010.
32. GB 50018-2002, Technical Code of Cold-Formed Thin-Wall Steel Structures, China Architecture & Building Press, Beijing, 2003.