journal article·2019-12

The influence of sodium sulfate and magnesium sulfate on the stability of bound chlorides in cement paste

Zhiqiang Yang, Jinyang Jiang, Xing Jiang, Song Mu, Meng Wu, Shiyu Sui, Liguo Wang, Fengjuan Wang

Publisher page

Abstract

Abstract Chloride binding is an important factor for chloride transport in cementitious materials. The ions from the pore solution or the environment may affect the stability of the bound chlorides. In this study, the equilibrium method was used to investigate the stability of bound chlorides of well hydrated cement paste (HCP) with different concentrations of sodium sulfate (Na2SO4) and magnesium sulfate (MgSO4) attack under three conditions (including: I. HCP intermixed with chloride was submerged in sulfate solution; II. HCP was soaked in combined chloride-sulfate solution; III: HCP was exposed to chloride solution, followed by sulfate solution). Experimental techniques including X-ray diffraction (XRD) and thermogravimetric (TG) were combined to identify the phase assemblage of HCP before and after sulfate attack. The results show that the presence of sulfate decreases the amount of bound chlorides, which is mainly caused by the decomposition of Friedel’s salt. Besides, the influence of MgSO4 attack on the stability of bound chlorides depends on the concentration of MgSO4 solution. As a result of the “blocking effect” of brucite, sample exposed to 1% MgSO4 presented a higher chloride binding capacity than that exposed to 1% Na2SO4 solution. However, extensive brucite and gypsum were formed with the increase of the concentration of MgSO4 solution. This leads to the formation of microcracks in cement paste, which provides additional routes for the ingress of sulfate ions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Chloride resistance of concrete and its binding capacity–Comparison between experimental results and thermodynamic modeling10.1016/j.cemconcomp.2009.08.001 ↗
2. Modelling of chloride binding related to hydration products in slag-blended cements10.1016/j.conbuildmat.2014.04.038 ↗
3. Chloride binding into hydrated blended cements: the influence of limestone and alkalinity10.1016/j.cemconres.2013.02.010 ↗
4. Role of calcium on chloride binding in hydrated Portland cement–metakaolin–limestone blends10.1016/j.cemconres.2017.02.003 ↗
5. Chloride binding capacity of pastes influenced by carbonation under three conditions10.1016/j.cemconcomp.2017.08.011 ↗
6. Influence of the C/S and C/A ratios of hydration products on the chloride ion binding capacity of lime-SF and lime-MK mixtures10.1016/j.cemconres.2007.08.024 ↗
7. Sulfate attack expansion mechanisms10.1016/j.cemconres.2013.07.005 ↗
8. Influence of pozzolana on sulfate attack of cement stone affected by chloride ions10.1617/s11527-013-0159-5 ↗
9. Study on the expansion of concrete under attack of sulfate and sulfate–chloride ions10.1016/j.conbuildmat.2012.05.003 ↗
10. The stability of bound chlorides in cement paste with sulfate attack10.1016/j.cemconres.2014.11.010 ↗
11. Effect of magnesium sulfate on the durability of limestone mortars based on quaternary blended cements10.1016/j.cemconcomp.2015.10.020 ↗
12. Effects of sulfate and magnesium ion on the chloride transportation behavior and binding capacity of Portland cement mortar10.1016/j.conbuildmat.2019.01.132 ↗
13. Fresh and hardened properties of seawater-mixed concrete10.1016/j.conbuildmat.2018.09.126 ↗
14. Slag hydration and chloride binding in slag cements exposed to a combined chloride-sulphate solution10.1016/j.conbuildmat.2018.11.055 ↗
15. Effect of stray current on stability of bound chlorides in chloride and sulfate coexistence environment10.1016/j.conbuildmat.2018.11.010 ↗
16. Chloride binding capacity and binding isotherms of OPC pastes and mortars10.1016/0008-8846(93)90089-R ↗
17. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
18. Study on chloride binding capability of coal gangue based cementitious materials10.1016/j.conbuildmat.2018.02.071 ↗
19. Releases of bound chlorides from chloride-admixed plain and blended cement pastes subjected to sulfate attacks10.1016/j.conbuildmat.2013.03.068 ↗
20. Improving the mechanical performance of high-grade slag cement by the addition of Portland cement and sulfoaluminate cement10.1016/j.conbuildmat.2012.04.041 ↗
21. The impact of sulphate and magnesium on chloride binding in Portland cement paste10.1016/j.cemconres.2014.07.007 ↗
22. Resistance of class C fly ash belite cement to simulated sodium sulphate radioactive liquid waste attack10.1016/j.jhazmat.2008.04.086 ↗
23. Enhancement of nano-alumina on long-term strength of Portland cement and the relation to its influences on compositional and microstructural aspects10.1016/j.cemconcomp.2019.01.016 ↗
24. Mechanism of sulfate attack: a fresh look: Part 2. Proposed mechanisms10.1016/S0008-8846(02)00958-4 ↗
25. Influence of sulfate solution concentration on the formation of gypsum in sulfate resistance test specimen10.1016/j.cemconres.2005.04.006 ↗
26. Influence of sulfate on the chloride diffusion mechanism in mortar10.1016/j.conbuildmat.2018.11.238 ↗
27. Corrosion of steel bars in OPC mortar exposed to NaCl, MgCl2 and CaCl2: macro- and micro- cell corrosion perspective10.1016/j.cemconres.2009.09.029 ↗
28. Karen Scrivener, Ruben Snellings, B. Lothenbach, A Practical Guide to Microstructural Analysis of Cementitious Materials, 2016.
29. Friedel's salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution10.1016/j.cemconcomp.2017.01.002 ↗
30. Comparing chloride ingress from seawater and NaCl solution in Portland cement mortar10.1016/j.cemconres.2018.09.014 ↗
31. Chloride binding in sound and carbonated cementitious materials with various types of binder10.1016/j.conbuildmat.2014.05.049 ↗
32. Improving the chloride binding capacity of cement paste by adding nano-Al2O310.1016/j.conbuildmat.2018.11.012 ↗
33. Study on the micro-crack evolution of concrete subjected to stress corrosion and magnesium sulfate10.1016/j.conbuildmat.2017.02.127 ↗
34. Electrokinetic potential of hydrated cement in relation to adsorption of chlorides10.1016/j.cemconres.2009.01.006 ↗
35. Chloride binding of cement pastes with fly ash exposed to CaCl2 solutions at 5 and 23 °C10.1016/j.cemconcomp.2018.12.011 ↗
36. Effect of magnesium on calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2017.03.012 ↗