journal article·2020-02

Recycled microbial mortar: Effects of bacterial concentration and calcium lactate content

Mohammadsadegh Vaezi, Seyed Alireza Zareei, Mahshid Jahadi

Publisher page

Abstract

Abstract This study investigated the optimum bacterial concentration and calcium lactate content in mortars containing recycled concrete aggregate (RCA) as full replacement of natural fine aggregate (NFA) for the first time. For this purpose, bacterial mortars with cells concentration of 103, 105 and 107 cells/ml were prepared. Calcium lactate was used as the organic precursor at dosages of 1%, 3%, and 5% of cement weight. The mechanical, durability, crack healing, and microstructural characteristics of the bacterial mixes were examined and compared to those of the control mix. The results indicated that incorporating bacterial cells with concentration of 105 cells/ml treated with 1% calcium lactate led to the optimal mix. The 28-day compressive strength of the optimal mix increased by 21% over that of the control mix. The lowest water absorption was also recorded for this mix, which was about 7% lower than that of the control mix. The scanning electron microscopy (SEM) images of the optimal mix showed a dense and compact microstructure as a result of calcite precipitation, which filled the air voids and reduced the pore size. Increasing the calcium lactate content lowered the quality of the pore system due to overproduction of calcium carbonate (CaCO3) crystals. This was confirmed by the results of porosimetry test using mercury injection method where the sample prepared with 5% calcium lactate and bacterial concentration of 103 cells/ml showed 450% higher total porosity as compared to the control sample. On the other hand, crack healing analysis revealed that the maximum healing in surface cracks occurred at the maximum bacterial concentration and calcium lactate content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. A review of alternative approaches to the reduction of CO2 emissions associated with the manufacture of the binder phase in concrete10.1016/j.cemconres.2015.04.012 ↗
2. Recycled ceramic waste high strength concrete containing wollastonite particles and micro-silica: A comprehensive experimental study10.1016/j.conbuildmat.2018.12.161 ↗
3. Performance of sustainable high strength concrete with basic oxygen steel-making (BOS) slag and nano-silica
4. Concrete with recycled aggregates: the Portuguese experimental research10.1617/s11527-010-9595-7 ↗
5. Use of aggregates from recycled construction and demolition waste in concrete10.1016/j.resconrec.2006.05.010 ↗
6. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
7. Behaviour of cementitious mortars containing different kinds of recycled aggregate10.1016/j.conbuildmat.2007.12.006 ↗
8. Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates10.1016/j.conbuildmat.2004.03.005 ↗
9. Properties of recycled concrete aggregate and their influence in new concrete production10.1016/j.resconrec.2018.02.005 ↗
10. Combined influence of recycled concrete aggregates and high contents of fly ash on concrete properties10.1016/j.conbuildmat.2017.09.128 ↗
11. Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack10.1016/j.conbuildmat.2016.12.103 ↗
12. Indirect evaluation of the compressive strength of recycled aggregate concrete with high fly ash ratios10.1680/jmacr.17.00216 ↗
13. Enhancing mechanical and durability properties of recycled aggregate concrete10.1016/j.conbuildmat.2017.09.137 ↗
14. Surface treatment of recycled concrete aggregates through microbial carbonate precipitation10.1016/j.conbuildmat.2014.01.085 ↗
15. Modification of recycled concrete aggregate by calcium carbonate biodeposition10.1016/j.conbuildmat.2012.02.027 ↗
16. Improving the properties of recycled concrete aggregate with bio-deposition approach10.1016/j.cemconcomp.2018.09.012 ↗
17. Mechanical properties of concrete containing 100% treated coarse recycled concrete aggregate10.1016/j.conbuildmat.2017.12.131 ↗
18. Influence of recycled concrete aggregates on the engineering and durability properties of alkali activated slag concrete10.1016/j.conbuildmat.2016.12.050 ↗
19. Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag10.1016/j.conbuildmat.2017.10.118 ↗
20. Improving the mechanical properties of recycled concrete aggregate using chopped basalt fibers and acid treatment10.1016/j.conbuildmat.2017.02.128 ↗
21. Failure characteristics of self-compacting concretes made with recycled aggregates10.1016/j.conbuildmat.2015.08.036 ↗
22. Bacteria-based self-healing concrete to increase liquid tightness of cracks10.1016/j.conbuildmat.2016.06.080 ↗
23. Self-healing in cementitious materials: Materials, methods and service conditions10.1016/j.matdes.2015.12.091 ↗
24. E. Tziviloglou, K. Van Tittelboom, D. Palin, J. Wang, M.G. Sierra-Beltrán, Y.Ç. Erşan, R. Mors, V. Wiktor, H.M. Jonkers, E. Schlangen, Bio-based self-healing concrete: from research to field application, in: Self-Healing Mater., Springer, 2016: pp. 345–385.10.1007/12_2015_332 ↗
25. Bacterial concrete: new era for construction industry
26. Formations of calcium carbonate minerals by bacteria and its multiple applications10.1186/s40064-016-1869-2 ↗
27. Quantification of crack-healing in novel bacteria-based self-healing concrete10.1016/j.cemconcomp.2011.03.012 ↗
28. Microbiological precipitation of CaCO310.1016/S0038-0717(99)00082-6 ↗
29. V. Ramakrishnan, K.P. Ramesh, S.S. Bang, Bacterial concrete, in: Smart Mater., International Society for Optics and Photonics, 2001: pp. 168–177.
30. V. Ramakrishnan, R.K. Panchalan, S.S. Bang, R. City, Improvement of concrete durability by bacterial mineral precipitation, in: Proc. 11th Int. Conf. Fract., 2005: pp. 20–25.
31. Application of bacteria as self-healing agent for the development of sustainable concrete10.1016/j.ecoleng.2008.12.036 ↗
32. Screening of bacteria and concrete compatible protection materials10.1016/j.conbuildmat.2015.04.027 ↗
33. Use of bacteria to repair cracks in concrete10.1016/j.cemconres.2009.08.025 ↗
34. Biotech cementitious materials: some aspects of an innovative approach for concrete with enhanced durability10.1016/j.conbuildmat.2012.09.080 ↗
35. Microbially mediated calcium carbonate precipitation on normal and lightweight concrete10.1016/j.conbuildmat.2012.07.040 ↗
36. Remediation of concrete using micro-organisms
37. Properties of bacterial rice husk ash concrete10.1016/j.conbuildmat.2016.05.146 ↗
38. Influence of bacteria on the compressive strength, water absorption and rapid chloride permeability of concrete incorporating silica fume10.1016/j.conbuildmat.2012.07.029 ↗
39. Investigation into the optimal bacterial concentration for compressive strength enhancement of microbial concrete10.1016/j.conbuildmat.2018.06.176 ↗
40. Optimum rice husk ash content and bacterial concentration in self-compacting concrete10.1016/j.conbuildmat.2019.06.190 ↗
41. Application of hydrogel encapsulated carbonate precipitating bacteria for approaching a realistic self-healing in concrete10.1016/j.conbuildmat.2014.06.018 ↗
42. Permeation properties of concrete made with fly ash and silica fume: Influence of ureolytic bacteria10.1016/j.conbuildmat.2013.08.023 ↗
43. The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets10.1016/j.conbuildmat.2018.09.086 ↗
44. The tensile performance of FRP bars embedded in concrete under elevated temperatures10.1016/j.conbuildmat.2019.03.239 ↗
45. Green high strength concrete containing recycled waste ceramic aggregates and waste carpet fibers: mechanical, durability, and microstructural properties10.1016/j.jobe.2019.100914 ↗
46. Geopolymers vs. alkali-activated materials (AAMs): A comparative study on durability, microstructure, and resistance to elevated temperatures of lightweight mortars10.1016/j.conbuildmat.2019.06.079 ↗
47. Experimental investigation and probabilistic models for residual mechanical properties of GFRP pultruded profiles exposed to elevated temperatures10.1016/j.compstruct.2018.12.032 ↗
48. ASTM C109/C109M-16a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA, 2016.
49. ASTM C1403-15, Standard Test Method for Rate of Water Absorption of Masonry Mortars, ASTM International West Conshohocken, PA, 2015.
50. ASTM C1760-12, Standard test method for bulk electrical conductivity of hardened concrete, in: ASTM International West Conshohocken, PA, 2012.
51. J. Zhang, Microstructure study of cementitious materials using resistivity measurement, Hong Kong University of Science and Technology (Hong Kong), 2008.
52. Sample mass and dimension effects on mercury intrusion porosimetry results10.1016/0008-8846(92)90121-B ↗
53. The effect of drying on cement pastes pore structure as determined by mercury porosimetry10.1016/0008-8846(88)90098-1 ↗
54. Experimental and numerical evaluation of piston metallic damper (PMD)10.1016/j.jcsr.2018.11.024 ↗
55. Waste ceramic powder-based geopolymer mortars: effect of curing temperature and alkaline solution-to-binder ratio10.1016/j.conbuildmat.2019.116686 ↗
56. Influence of bacteria on the compressive strength, water absorption and rapid chloride permeability of fly ash concrete10.1016/j.conbuildmat.2011.07.042 ↗
57. A study on strength and self-healing characteristics of Bacterial concrete10.14445/22315381/IJETT-V38P222 ↗
58. A Study on the Strength of the Bacterial Concrete Embedded with Bacillus Megaterium
59. C.M. Meera, V. Subha, Strength And Durability Assessment Of Bacteria Based Self-Healing Concrete, in: Int. Conf. Emerg. Trends Eng. Manag., 2016: pp. 1–7.
60. J. Cunniffe, The effects of calcium lactate on early-age concrete, Internal report, University of Bath, 2013.
61. Influences of bacteria-based self-healing agents on cementitious materials hydration kinetics and compressive strength10.1016/j.conbuildmat.2016.06.075 ↗
62. Effect of calcium lactate on compressive strength and self-healing of cracks in microbial concrete10.1007/s11709-018-0494-2 ↗
63. Use of bacteria to improve electrical resistivity and chloride penetration of air-entrained concrete10.1016/j.conbuildmat.2019.03.150 ↗
64. Modification of porous media permeability, using calcium carbonate produced enzymatically in situ10.1016/S0141-0229(03)00191-1 ↗
65. Use of silica gel or polyurethane immobilized bacteria for self-healing concrete10.1016/j.conbuildmat.2011.06.054 ↗
66. Crack healing in concrete using various bio influenced self-healing techniques10.1016/j.conbuildmat.2015.11.006 ↗
67. Role of calcium sources in the strength and microstructure of microbial mortar10.1016/j.conbuildmat.2014.12.040 ↗
68. Application of microbial biocementation to improve the physico-mechanical properties of cement mortar10.1016/j.hbrcj.2012.10.004 ↗
69. Self-healing concrete by use of microencapsulated bacterial spores10.1016/j.cemconres.2013.11.009 ↗
70. H. Schlangen, H.M. Jonkers, S. Qian, A. Garcia, Recent advances on self healing of concrete, in: Fram. Proc. 7th Int. Conf. Fract. Mech. Concr. Concr. Struct. Jeju Island, Korea, 23-28 May 2010, 2010.