Correlating the HWTT laboratory test data to field rutting performance of in-service highway sections
Source abstract
Abstract
Abstract Rutting is one of the common distresses occurring in hot-mix asphalt (HMA) pavements that can be mitigated through adequate laboratory testing during the HMA mix-design screening stage. The Hamburg Wheel Tracking Tester (HWTT) is one of the test methods widely used in the routine HMA mix-design screening and quantification of the HMA rutting resistance potential in the laboratory. However, the occurrence of premature field rutting failures have been reported for some surface HMA mixes (even after being satisfactorily screened with the HWTT test in the laboratory), mostly in high-temperature environments, heavy truck-trafficked areas, and high shear-stress zones such as intersections, curves, etc. In an effort to improve the HWTT’s screening and performance predictive capabilities, new models and HMA rutting parameters such as the rutting area, normalized rutting area, shape factor, rut-depth ratio, rutting resistance index, and the equivalent remaining laboratory rutting life were evaluated to supplement the traditional rut depth and number of load passes criteria. The fundamental theory for formulating these new models and HMA rutting parameters is to better account for the currently prevailing traffic loading and climatic conditions. However, one key challenge associated with such enhancements and new model developments prior to industry implementation is correlations and validation with field performance data. Using the Texas flexible pavements and overlays database, namely the Texas Data Storage System (DSS) as the data source, this study was conducted to correlate and validate the HWTT laboratory test data to field rutting performance of in-service highways. As extracted from the DSS, three Texas commonly used HMA mixes (ranging from fine to coarse-graded) and five in-service highways were used for the study. Overall, the laboratory HWTT yielded good correlations with field rutting performance data with a coefficient of determination generally exceeding 60% for most of the HMA rutting parameters evaluated. In particular, the rutting area and normalized rutting area parameters exhibited statistical superiority in terms of correlations with all the field rutting performance data, with coefficient of determination values averaging 69.9%. Nonetheless, more field correlations and validation studies of this nature are strongly recommended, among others, to aid in defining and establishing the pass-fail screening criteria/thresholds for the proposed HMA rutting parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Federal Highway Administration, Pavement Distress Identification Manual, 2009.
2. J.S. Miller, W.Y. Bellinger, Distress Identification Manual for Long-Term Pavement Performance Program, 5th ed., 2014.
3. Prediction model for field rut depth of asphalt pavement based on hamburg wheel tracking test properties10.1061/(ASCE)MT.1943-5533.0001946 ↗
4. Hot-mix asphalt permanent deformation evaluated by hamburg wheel tracking, dynamic modulus, and repeated load tests10.3141/2296-05 ↗
5. Mechanisms of asphalt mixture rutting in the dry Hamburg Wheel Tracking test and the potential to be alternative test in measuring rutting resistance10.1016/j.conbuildmat.2017.04.080 ↗
6. US ARMY CORPS OF ENGINEERS, Asphalt Surfaced Airfield Paver Distress Identification Manual, 2009.
7. US ARMY CORPS OF ENGINEERS, Paver Asphalt Distress Manual, 1997.
8. Texas Department of Transportation (TxDOT), TEX-242-F: Test procedure for Hamburg Wheel-Tracking Test, 2014. https://ftp.dot.state.tx.us/pub/txdot-info/cst/TMS/200-F_series/pdfs/bit242.pdf.
9. Texas Department of Transportation (TxDOT), Standard Specifications for Construction and Maintenance of Highways, Streets, and Bridges, 2014. http://ftp.dot.state.tx.us/pub/txdot-info/des/specs/spec-book-jan-june-15-letting.pdf.
10. A statistical analysis of hamburg wheel tracking device testing results10.1080/14680629.2009.9690249 ↗
11. Comparison of laboratory wheel-tracking test results with wes track performance10.3141/1681-15 ↗
12. American Association of State and Highway Transportation Officials, AASHTO T 324-17: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA), 2017.
13. Evaluation of AASHTO T 324 hamburg-wheel track device test10.1016/j.conbuildmat.2016.03.171 ↗
14. National Academies of Sciences Engineering and Medicine, Hamburg Wheel-Track Test Equipment Requirements and Improvements to AASHTO T 324, The National Academies Press, Washington, DC, 2016. doi: 10.17226/21931.10.17226/21931 ↗
15. Evaluation of various hamburg wheel-Tracking devices and AASHTO T 324 specification for rutting testing of asphalt mixtures10.1080/14680629.2017.1389092 ↗
16. Measurement of HMA shear resistance potential in the lab: the Simple Punching Shear Test10.1016/j.conbuildmat.2015.09.006 ↗
17. L.F. Walubita, S.I. Lee, J. Zhang, A.N. Faruk, S. Nguyen, T. Scullion, HMA Shear Resistance , Permanent Deformation , and Rutting Test For Texas Mixes: Year-1 Report, 2014. http://tti.tamu.edu/documents/0-6744-1.pdf.
18. L.F. Walubita, A.N. Faruk, S.I. Lee, D. Nguyen, R. Hassan, S. Tom, HMA Shear Resistance, Permanent Deformation, and Rutting Tests for Texas Mixes: Final Year-2 Report, 2014. http://tti.tamu.edu/documents/0-6744-2.pdf.
19. C. Quiroga, E. Fernando, J. Oh, Energy Developments and the Transportation Infrastructure in Texas: Impacts and Strategies, 2012. http://tti.tamu.edu/documents/0-6498-1.pdf.
20. Sensitivity analysis and validation of the Simple Punching Shear Test (SPST) for screening HMA mixes10.1016/j.conbuildmat.2018.02.198 ↗
21. The Hamburg Rutting Test (HWTT) alternative data analysis methods and HMA screening criteria10.1007/s42947-019-0014-3 ↗
22. L.F. Walubita, T. Nyamuhokya, S.I. Lee, A. Prakoso, Implementation of the HMA Shear Test for Routine Mix-Design and Screening: Technical Report, 2019. http://tti.tamu.edu/documents/5-6744-01-R1.pdf.
23. L.F. Walubita, S.I. Lee, A.N.M. Faruk, T. Scullion, S. Nazarian, I. Abdallah, Texas Flexible Pavements and Overlays: Year 5 Report — Complete Data Documentation, 2017. http://tti.tamu.edu/documents/0-6658-3.pdf.
24. Comparative evaluation of five HMA rutting-related laboratory test methods relative to field performance data: DM, FN, RLPD, SPST, and HWTT10.1016/j.conbuildmat.2019.04.250 ↗
25. P.S. Kandhal, J. L Allen Cooley, NCHRP Report 508-Accelerated Laboratory Rutting Tests: Evaluation of the Asphalt Pavement Analyzer, Washington, D.C., 2003. http://onlinepubs.trb.org/onlinepubs/nchrp/nchrp_rpt_508.pdf.
26. Evaluation of wheel tracking and field rutting susceptibility of dense bituminous mixes10.1080/14680629.2017.1374998 ↗
27. Novel method for moisture susceptibility and rutting evaluation using Hamburg wheel tracking test10.3141/2446-01 ↗
28. Long-term field rutting and moisture susceptibility performance of warm-mix asphalt pavement10.3141/2575-11 ↗
29. Reporting results from the Hamburg wheel tracking device10.3141/2446-10 ↗
30. L.F. Walubita, G. Das, E. Espinoza, J. Oh, T. Scullion, S.I. Lee, J. Garibay, S. Nazarian, I. Abdallah, Texas Flexible Pavements and Overlays: Year 1 Report - Test Sections, Data Collection, Analyses, and Data Storage System, 2012. http://tti.tamu.edu/documents/0-6658-1.pdf.
31. F. Rahman, M. Hossain, Final Report No KS-14-1: Review and analysis of hamburg wheel tracking device test data, 2014. http://dmsweb.ksdot.org/AppNetProd/docpop/docpop.aspx?clienttype=html&docid=9011848.
32. Illinois Department of Transportation (IDOT), Manual of Modified Test Procedures, 2019. https://www.illinoistollway.com/documents/20184/760479/01-Tollway+Manual+of+Test+Procedures_Final-03142019.pdf/7ee864b6-9845-4cab-8b82-3fcefdec6839?version=1.1.
33. Evaluation of Hamburg wheel-tracking device test with laboratory and field performance data
34. ASTM International, ASTM D 2726: Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures, 2019. doi:10.1520/D2726_D2726M-19.10.1520/D2726_D2726M-19 ↗
35. The Hamburg rutting test – effects of HMA sample sitting time and test temperature variation10.1016/j.conbuildmat.2016.01.031 ↗
36. Weather Underground, (n.d.). https://www.wunderground.com/ (accessed 27.05.19).
37. S.I. Lee, L.F. Walubita, A.N.M. Faruk, T. Scullion, S. Nazarian, I. Abdallah, Texas Flexible Pavements and Overlays: Interim Report for Phases II and III – Data Collection and Model Calibration, 2017. http://tti.tamu.edu/documents/0-6658-2.pdf.
38. F. Zhou, C. Estakhri, T. Scullion, Literature Review: Performance of RAP/RAS Mixes and New Direction, 2014. http://tti.tamu.edu/documents/0-6738-1.pdf.
39. Experimental-statistical investigation of testing variables of a semicircular bending (SCB) fracture test repeatability for bituminous mixtures10.1520/JTE20160103 ↗