Evaluation of aggregate gradation on aggregate packing in porous asphalt mixture (PAM) by 3D numerical modelling and laboratory measurements
Source abstract
Abstract
Abstract The packing conditions of unbound aggregate blends and porous asphalt mixture (PAM) are investigated via comparative studies between mechanistic laboratory measurements versus discrete element method (DEM) algorithmic simulations. Nine aggregate gradations with variations in 2.36–4.75 mm and 6.3–9.5 mm fractions were studied. For PAM, PG-76 binder which is a polymer-modified asphalt was used in the mixture, with compaction by gyratory compactor. Simulation models of unbound aggregate blends and PAMs were built in Particle Flow Code in 3 Dimensions (PFC3D) algorithm simulation. The simulation results were compared with the volumetric measurements of laboratory specimens. The results showed that the proportion of 6.3–9.5 mm fraction does not have notable influence on the aggregate packing structure, while 2.36–4.75 mm size fraction has notable influence. The 2.36–4.75 mm fraction has a tendency to either fill the voids of aggregate packing or affect re-orientation of stone-on-stone interlocking of the coarser fraction. DEM modelling provides a valuable aid to design feasible PAMs with a desired packing condition, which shall be supplemented with limited laboratory verifications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Geotechnical Engineering and Underground Structures · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Bendtsen · 2005
2. Comparing the effect of skid resistance on porous asphalt mixes and conventional hot-mix asphalt
3. Evaluations of performance and thermal properties in porous asphalt concrete containing steel slag10.4028/www.scientific.net/AMR.1025-1026.688 ↗
4. Measurement of Visibility Loss due to Splash and Spray: the Comparison between Porous
5. Measurement of visibility loss due to splash and spray: porous, SMA and conventional asphalt pavements10.1080/10298430903578945 ↗
6. Stempihar · 2012
7. Chen · 2016
8. The effect of aggregate packing interlocking in the performance of bituminous mixtures
9. Kandhal · 2002
10. Vavrik · 2002
11. Viscoelastic analysis of flexible pavements and its effects on top-down cracking10.1061/(ASCE)0899-1561(2009)21:7(324) ↗
12. Stone-on-stone contact of permeable friction course mixtures10.1061/(ASCE)MT.1943-5533.0000117 ↗
13. Evaluation of the development of aggregate packing in porous asphalt mixture using discrete element method simulation10.1080/14680629.2016.1138881 ↗
14. Itasca. PFC3D Version 4.0. Itasca Consulting Group Inc.: Minneapolis, Minnesota (2008).
15. Experimental analysis of skeleton strength of porous asphalt mixture10.1016/j.conbuildmat.2018.03.116 ↗
16. Modelling asphalt mastic stiffness using discrete element analysis and micromechanics based models10.1080/10298430500159040 ↗
17. S.H. Shen, H.N. Yu, Determination of HMA Voids in Mineral Aggregate Based on the Analysis of Aggregate Gradation and Packing. In 89th TRB 2010 Annual Meeting.
18. Asphalt compaction study: micromechanical modelling of a simplified lab compaction procedure
19. Discrete element simulation of bending beam rheometer test for asphalt binder
20. Viscoelastic model for discrete element simulation of asphalt Mixtures
21. Discrete element visco-elastic modelling of a realistic graded asphalt mixture10.1016/j.sandf.2013.12.002 ↗
22. Zulkati · 2013
23. 3D Discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure10.1080/10298436.2010.489114 ↗
24. Micromechanical modeling of asphalt concrete uniaxial creep using the discrete element method10.1080/14680629.2010.9690296 ↗
25. Modelling the DSR complex shear modulus of asphalt binder using 3D discrete element approach10.1016/j.conbuildmat.2013.12.005 ↗
26. Rheological and 3D DEM characterisation of potential rutting of cold bituminous mastics10.1016/j.conbuildmat.2014.09.051 ↗
27. Simulation of asphalt concrete plastic deformation behaviour10.1061/(ASCE)MT.1943-5533.0002181 ↗
28. Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method10.1016/j.conbuildmat.2015.08.116 ↗
29. 02139
30. L.H. Sperling. Introduction to Physical Polymer Science, 2nd Edition (1992)
31. Y. Liu, Z. You, Determining Burger’s Model parameters of asphalt materials using creep-recovery testing data. Symposium on Pavement, in: Mechanics and Materials at the Inaugural International Conference of the Engineering Mechanics Institute. Published online: June, 20, 2012. https://doi.org/10.1061/41008(334)3.10.1061/41008(334)3 ↗
32. Y. Fukumoto, H. Sakaguchi, A. Murakami, The role of rolling friction in granular packing, Granular Matter. 15 (2) (2013), https://doi.org/10.1007/s10035-013-0398-8.10.1007/s10035-013-0398-8 ↗
33. Rheological and interaction analysis of asphalt binder, mastic, and mortar