A silica aerogel synthesized from olivine and its application as a photocatalytic support
Source abstract
Abstract
This study investigates the performance of a silica aerogel-based air purifying coating to functionalize building materials. The air-purifying function comes from an increased photocatalytic activity when the photocatalyst is supported on a silica network with a large specific surface area like silica aerogels. In this study, silica aerogel was first synthesized with a low energy-consumption method from olivine via ambient pressure drying and was applied as a support to load photocatalytic anatase crystals. The silica aerogel production includes sol-gel synthesis, ion-exchange, surface modification and ambient pressure drying. The produced silica aerogel obtained a high specific surface area (694 m2/g) and pore volume (2.99 cm3/g), with a uniform pore size distribution and mesoporous structure. Titania was loaded onto the prepared silica aerogel through a precipitation method. The resulting samples were characterized by measuring the conversion efficiency to oxidize nitric oxide under UV-light irradiation, nitrogen physisorption and FTIR. The silica aerogel coating with titania crystals had a photocatalytic activity of 99.6%, showing it to be a promising photocatalyst in the built environment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aerogels and thermal insulation · TiO2 Photocatalysis and Solar Cells · Mesoporous Materials and Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Durable photocatalytic thin coatings for road applications10.1016/j.conbuildmat.2019.04.222 ↗
2. Durability of cementitious photocatalytic building materials10.1016/j.cattod.2016.10.012 ↗
3. Photocatalytic de-pollution in the Leopold II tunnel in Brussels: NOx abatement results10.1016/j.buildenv.2014.10.032 ↗
4. Recent photocatalytic applications for air purification in Belgium10.3390/coatings4030553 ↗
5. Titania-silica composites: a review on the photocatalytic activity and synthesis methods10.4236/wjnse.2015.54018 ↗
6. Influence of synthesis conditions on the properties of photocatalytic titania-silica composites10.1016/j.jphotochem.2018.10.040 ↗
7. Field study of NOx degradation by a mineral-based air purifying paint10.1016/j.buildenv.2018.06.014 ↗
8. Aerogel-based thermal superinsulation: an overview10.1007/s10971-012-2792-9 ↗
9. State of the art in thermal insulation materials and aims for future developments10.1016/j.enbuild.2004.05.006 ↗
10. Thermal insulation material based on SiO2 aerogel10.1016/j.conbuildmat.2016.06.096 ↗
11. Experimental investigations of aerogel-incorporated ultra-high performance concrete10.1016/j.conbuildmat.2014.12.064 ↗
12. Functionalized silica aerogels for gas-phase purification, sensing, and catalysis: a review10.1016/j.micromeso.2017.04.055 ↗
13. Current status, opportunities and challenges in catalytic and photocatalytic applications of aerogels: environmental protection aspects10.1016/j.apcatb.2017.08.012 ↗
14. Recent advances in aerogels for environmental remediation applications: a review10.1016/j.cej.2016.04.098 ↗
15. Synthesis and biomedical applications of aerogels: possibilities and challenges10.1016/j.cis.2016.05.011 ↗
16. Aegerter · 2011
17. Aerogels-recent progress in production techniques and novel applications10.1023/A:1008663908431 ↗
18. Preparation of hydrophobic silica aerogel with kaolin dried at ambient pressure10.1016/j.colsurfa.2016.04.059 ↗
19. Cost-effective synthesis of silica aerogels from fly ash via ambient pressure drying10.1016/j.jnoncrysol.2010.08.005 ↗
20. Synthesis of a green nano-silica material using beneficiated waste dunites and its application in concrete10.4236/wjnse.2013.33006 ↗
21. The kinetics of the olivine dissolution under the extreme conditions of nano-silica production10.1016/j.apgeochem.2014.10.015 ↗
22. The properties of amorphous nano-silica synthesized by the dissolution of olivine10.1016/j.cej.2012.09.042 ↗
23. A novel TiO2-SiO2 aerogel nanocomposite absorbent: preparation, characterization and photocatalytic degradation effects on automobile exhaust10.1088/2053-1591/aaaf10 ↗
24. Photocatalytic activity of TiO2 supported SiO2-Al2O3 aerogels prepared from industrial fly ash10.1016/S1872-2067(16)62546-9 ↗
25. Synthesis of mesoporous SiO2 aerogel/WxTiO2 nanocomposites with high adsorptivity and photocatalytic activity10.1016/j.apt.2016.06.009 ↗
26. Silica-titania composite aerogel photocatalysts by chemical liquid deposition of titania onto nanoporous silica scaffolds10.1021/am5089132 ↗
27. SiO2/TiO2 composite aerogels: Preparation via ambient pressure drying and photocatalytic performance10.1016/j.ceramint.2014.05.093 ↗
28. Lazaro · 2013
29. Effect of heat treatment on hydrophobic silica aerogel10.1016/j.jhazmat.2018.08.087 ↗
30. M. Gordienko, D. Belous, A. Tyrtyshnikov, I. Mitrofanov, et al., Prediction of structure changes of organic-silica aerogels during pyrolysis, in: A. Espuña, M. Graells, L. Puigjaner (Eds.), Computer Aided Chemical Engineering, 2017, pp. 181–186.10.1016/B978-0-444-63965-3.50032-5 ↗