Bond behaviour of steel-TRM composites for strengthening masonry elements: Experimental testing and numerical modelling
Source abstract
Abstract
Abstract Textile reinforced mortar (TRM) composites are an innovative solution for strengthening masonry structural elements due to their effectiveness and sustainability, as well as their compatibility with masonry substrates. As TRM composites are externally bonded to the surface of structural elements, the bond behaviour at the textile-mortar matrix and mortar matrix-substrate interfaces is a critical issue that needs to be investigated. In this study, an extensive study is carried out which includes a series of experimental tests combined with advanced numerical modelling with the aim to provide a better understanding of the bond behaviour of steel-TRM composites for strengthening a specific type of masonry which made by grey clay bricks. The experiments mainly consist of 28 single-lap shear bond tests on steel-TRM strengthened masonry elements. The effect of the masonry substrate condition, configuration of the textile, mechanical properties of the mortar matrix, and length of the bond are presented. The test results are discussed in terms of the full range of load-slip responses and failure modes. Then, an advanced numerical model based on simple interfacial local bond-slip constitutive laws is validated by agreement with the experimental findings. Finally, the numerical results are also used to evaluate the effective bond length and further understand the bond behaviour.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Medieval Architecture and Archaeology · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. TRM vs FRP jacketing in shear strengthening of concrete members subjected to high temperatures10.1016/j.compositesb.2016.09.026 ↗
2. Bond between TRM versus FRP composites and concrete at high temperatures10.1016/j.compositesb.2017.05.064 ↗
3. TRM versus FRP in flexural strengthening of RC beams: Behaviour at high temperatures10.1016/j.conbuildmat.2017.07.195 ↗
4. Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading10.1617/s11527-006-9207-8 ↗
5. Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading10.1617/s11527-007-9226-0 ↗
6. Mortar-based systems for externally bonded strengthening of masonry10.1617/s11527-014-0360-1 ↗
7. Kouris · 2018
8. Strengthening of concrete structures with textile reinforced mortars: state-of-the-art review10.1061/(ASCE)CC.1943-5614.0000882 ↗
9. Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements10.1016/j.compositesb.2017.06.018 ↗
10. Comparison of different types of TRM composites for strengthening masonry panels10.1016/j.conbuildmat.2019.05.179 ↗
11. Experimental investigation of tuff masonry panels reinforced with surface bonded basalt textile-reinforced mortar10.1016/j.compositesb.2016.09.094 ↗
12. Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: experimental evaluation10.1016/j.compstruct.2017.12.075 ↗
13. Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels10.1016/j.conbuildmat.2010.07.018 ↗
14. Out-of-plane response of masonry walls strengthened using textile-mortar system10.1016/j.conbuildmat.2018.01.026 ↗
15. Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures10.1016/j.compstruct.2013.08.026 ↗
16. Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints10.1016/j.conbuildmat.2015.10.045 ↗
17. Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures10.1016/j.compositesb.2017.05.048 ↗
18. Experimental tests for the characterization of sisal fiber reinforced cementitious matrix for strengthening masonry structures10.1016/j.conbuildmat.2019.05.168 ↗
19. Multi-level characterization of steel reinforced mortars for strengthening of masonry structures10.1016/j.matdes.2016.08.034 ↗
20. Experimental investigation of in-plane shear behaviour of grey clay brick masonry panels strengthened with SRG10.1016/j.engstruct.2018.02.027 ↗
21. Fiber-to-mortar bond behavior in TRM composites: Effect of embedded length and fiber configuration10.1016/j.compositesb.2018.06.014 ↗
22. Effect of test setup on the fiber-to-mortar pull-out response in TRM composites: experimental and analytical modeling10.1016/j.compositesb.2018.02.010 ↗
23. Modelling the nonlinear behaviour of masonry walls strengthened with textile reinforced mortars10.1016/j.engstruct.2016.12.029 ↗
24. Double lap shear test on steel fabric reinforced cementitious matrix (SFRCM)10.1016/j.compstruct.2018.06.001 ↗
25. Bond behavior of SRG-strengthened masonry units: testing and numerical modeling10.1016/j.conbuildmat.2014.04.070 ↗
26. Role of the matrix layers in the stress-transfer mechanism of FRCM composites bonded to a concrete substrate
27. Interface modeling approach for the study of the bond behavior of FRCM strengthening systems10.1016/j.compositesb.2017.12.052 ↗
28. Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems10.1016/j.compositesb.2017.03.052 ↗
29. Matrix-fiber bond behavior in PBO FRCM composites: a fracture mechanics approach10.1016/j.engfracmech.2014.01.011 ↗
30. Numerical investigation on the bond behavior of FRCM strengthening systems10.1016/j.compositesb.2018.03.010 ↗
31. Tensile behaviour of a basalt TRM strengthening system: influence of mortar and reinforcing textile ratios10.1016/j.compositesb.2017.07.027 ↗
32. Simple holonomic homogenization model for the non-linear static analysis of in-plane loaded masonry walls strengthened with FRCM composites10.1016/j.compstruct.2016.09.027 ↗
33. Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension10.1016/j.conbuildmat.2014.08.006 ↗
34. BSI EN 1015-11. Methods of Test for Mortar for Masonry: Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar. Bs En 1015 2006.
35. BS EN 772-16. BSI Standards Publication Methods of test for masonry units Part 16: Determination of dimensions. 2011.
36. Experimental bond behavior of FRP sheets glued on brick masonry10.1061/(ASCE)CC.1943-5614.0000086 ↗
37. FRP-masonry debonding: numerical and experimental study of the role of mortar joints10.1061/(ASCE)CC.1943-5614.0000282 ↗
38. Numerical study of the role of mortar joints in the bond behavior of FRP-strengthened masonry
39. Reinforced concrete beams strengthened with SRP/SRG systems: experimental investigation10.1016/j.conbuildmat.2015.06.027 ↗
40. Strengthening of structures with Steel Reinforced Polymers: a state-of-the-art review10.1016/j.compositesb.2016.08.025 ↗
41. Bond behaviour of Steel Reinforced Polymer strengthening systems10.1016/j.compstruct.2016.05.052 ↗
42. An experimental investigation on the bond behavior of steel reinforced polymers on concrete substrate10.1016/j.compstruct.2017.08.063 ↗
43. Experimental investigation of bond between glass textile reinforced mortar overlays and masonry: the effect of bond length10.1617/s11527-017-1033-7 ↗
44. ABAQUS. User’s Guide. Abaqus 612 2015 DOI:10.1017/CBO9781107415324.004.10.1017/CBO9781107415324.004 ↗