journal article·2020-10

Environmentally benign production of one-part alkali-activated slag with calcined oyster shell as an activator

Beomjoo Yang, Jeong Gook Jang

Publisher page

Abstract

Abstract This study focuses on an environmental friendly, non-corrosive and non-viscous activator during the production of one-part alkali-activated slag using calcined oyster shell (COS) powder. Test results demonstrate improved mechanical and microstructural characteristics for specimens prepared with COS powder as an activator. The highest increment in the strengths was revealed with a 5% COS addition due to the resulting enhanced pore refinement, whereas an excessive dose resulted in a delayed rate of C-S-H formation and a significant amount of large capillary pores, thus decreasing the strength. The mineralogical and microstructural properties of the paste were also analyzed, and these findings revealed that COS powder is suitable for use as an activator to produce one-part alkali-activated materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Carbon dioxide reduction potential in the global cement industry by 205010.1016/j.cemconres.2017.08.026 ↗
2. Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
3. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
4. P. Mec, J. Boháčová, J. Koňařík, Comparison of selected properties of Portland cement based materials and alkali activated materials based on granulated blast furnace slag, Materials Science Forum, Trans Tech Publ, 2016, pp. 107–113.10.4028/www.scientific.net/MSF.865.107 ↗
5. Alkali-activated cements opportunities and challenges10.1016/S0008-8846(98)00093-3 ↗
6. Alkali-activated binders: a review: Part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
7. A review on alkaline activation: new analytical perspectives10.3989/mc.2014.00314 ↗
8. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
9. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
10. Dry powder alkali-activated slag cements10.1680/jadcr.14.00078 ↗
11. Preparation and characterization of one-part non-Portland cement10.1016/j.ceramint.2015.08.096 ↗
12. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate10.1016/j.ceramint.2014.12.154 ↗
13. Micromechanics-based investigation of a sustainable ambient temperature cured one-part strain hardening geopolymer composite10.1016/j.conbuildmat.2016.11.117 ↗
14. Workability loss and compressive strength development of cementless mortars activated by combination of sodium silicate and sodium hydroxide10.1061/(ASCE)0899-1561(2009)21:3(119) ↗
15. Preparation of drying powder inorganic polymer cement based on alkali-activated slag technology10.1016/j.powtec.2017.02.036 ↗
16. Properties of alkali-activated mortar and concrete using lightweight aggregates10.1617/s11527-009-9499-6 ↗
17. The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes10.1016/j.cemconcomp.2018.12.027 ↗
18. Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar10.1016/j.jclepro.2018.03.202 ↗
19. Designing precursors for geopolymer cements10.1111/j.1551-2916.2008.02787.x ↗
20. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
21. Chemical–mechanical characteristics of crushed oyster-shell10.1016/S0956-053X(02)00159-9 ↗
22. Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties10.1016/j.cemconres.2005.03.016 ↗
23. Recycling of seashell waste in concrete: a review10.1016/j.conbuildmat.2017.12.009 ↗
24. Calcined oyster shell powder as an expansive additive in cement mortar10.3390/ma12081322 ↗
25. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
26. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
27. Study of alkali activated slag as alternative pavement binder10.1016/j.conbuildmat.2018.07.154 ↗
28. Engineering properties of natural pozzolan/slag based alkali-activated concrete10.1016/j.conbuildmat.2019.02.107 ↗
29. A calorimetric study of early hydration of alkali-slag cements10.1016/0008-8846(95)00126-W ↗
30. I. Richardson, H.F. Taylor, Cement chemistry, ICE Publishing, 2015.
31. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
32. Unlocking the role of MgO in the carbonation of alkali-activated slag cement10.1039/C7QI00754J ↗
33. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
34. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - Part II: Effect of Al2O310.1016/j.cemconres.2011.08.005 ↗
35. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers10.1016/j.cemconres.2009.10.010 ↗
36. Hydration products and reactivity of blast-furnace slag activated by various alkalis10.1111/j.1151-2916.2003.tb03623.x ↗
37. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
38. Quantitative evaluation of hydrated cement modified by silica fume using QXRD, 27Al MAS NMR, TG-DSC and selective dissolution techniques10.1016/j.conbuildmat.2012.06.075 ↗
39. 27Al and 25Mg solid-state magic-angle spinning nuclear magnetic resonance study of hydrotalcite and its thermal decomposition sequence10.1039/jm9930301263 ↗
40. Mehta · 2006
41. H. El-Didamony, A.A. Amer, H. Abd Ela-ziz, Properties and durability of alkali-activated slag pastes immersed in sea water, Ceramics Int. 38(5) (2012) 3773-3780.10.1016/j.ceramint.2012.01.024 ↗
42. Structure of calcium silicate hydrate (C-S-H): Near-, Mid-, and Far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
43. Alkali activation of fly ash: effect of the SiO2/Na2O ratio: Part I: FTIR study10.1016/j.micromeso.2007.02.055 ↗
44. An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) characterization of the speciation of arsenic (V) in Portland cement type-V10.1016/S0048-9697(98)00318-0 ↗