journal article·2020-10

Modeling of the corrosion-induced crack in concrete contained transverse crack subject to chloride ion penetration

Shuo Yu, Hao Jin

Publisher page

Abstract

Abstract This study aimed to investigate the effect of transverse cracks on corrosion-induced cracking in reinforced concrete (RC) structures. A three-dimensional diffusion-mechanical model of RC with transverse cracks was developed, the effects of the transverse crack deflection angle and width on the diffusion process were considered, and the extended finite element method (XFEM) was used to simulate corrosion-induced crack paths. An accelerated corrosion test was designed, and the experimental results were compared with the numerical calculation results to verify the accuracy of the crack patterns. Furthermore, the effects of the transverse crack deflection angle, distance to transverse crack, and steel bar diameter on the corrosion-induced crack patterns were investigated. The results showed that the deflection angle of the transverse crack not only influenced the width and length of the corrosion-induced cracks but also determined the location of the corrosion-induced crack. The rebar diameter had a minor effect on the longitudinal length of the crack but was sensitive to the variation in the circumferential angle of the cracks. In addition, increasing the distance to the transverse crack simultaneously decreased the longitudinal length and extended the initial time of the crack.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Corrosion-induced cracking and bond strength in reinforced concrete
2. Bond strength evaluation of corroded steel bars via the surface crack width induced by reinforced corrosion10.1016/j.engstruct.2017.08.051 ↗
3. Modeling time-dependent circumferential non-uniform corrosion of steel bars in concrete considering corrosion-induced cracking effects10.1016/j.engstruct.2019.109766 ↗
4. Corrosion induced stress field and cracking time of reinforced concrete with initial defects: analytical modeling and experimental investigation10.1016/j.corsci.2017.01.012 ↗
5. Laboratory studies on influence of transverse cracking on chloride-induced corrosion rate in concrete10.1016/j.cemconcomp.2015.12.006 ↗
6. Chloride-induced corrosion of steel in cracked concrete – Part I: experimental studies under accelerated and natural marine environments10.1016/j.cemconres.2015.08.009 ↗
7. A double-cylinder model incorporating confinement effects for the analysis of corrosion-caused cover cracking in reinforced concrete structures10.1016/j.corsci.2015.07.009 ↗
8. A model for the evolution of concrete deterioration due to reinforced corrosion10.1016/j.mcm.2010.05.023 ↗
9. Damage analysis and cracking model of reinforced concrete structures with rebar corrosion10.1016/j.corsci.2011.06.018 ↗
10. Analytical model for critical corrosion level of reinforcements to cause the cracking of concrete cover10.1016/j.conbuildmat.2019.06.210 ↗
11. Corrosion induced cracking: Effect of different corrosion rates on crackwidth evolution10.1016/j.conbuildmat.2016.12.030 ↗
12. Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures10.1016/j.corsci.2012.03.018 ↗
13. Corrosion-induced cover cracking: new test data and predictive models
14. Lattice modelling of corrosion induced cracking and bond in reinforced concrete10.1016/j.cemconcomp.2011.05.005 ↗
15. Meso-scale numerical investigation on cracking of cover concrete induced by corrosion of reinforcing steel10.1016/j.engfailanal.2014.01.011 ↗
16. Cover cracking of reinforced concrete due to rebar corrosion induced by chloride penetration10.1016/j.cemconres.2011.04.008 ↗
17. Numerical determination of concrete crack width for corrosion-affected concrete structures10.1016/j.compstruc.2017.07.016 ↗
18. Penetration of corrosion products and corrosion-induced cracking in reinforced cementitious materials: experimental investigations and numerical simulations10.1016/j.cemconcomp.2013.04.011 ↗
19. Mesoscopic model to simulate the mechanical behavior of reinforced concrete members affected by corrosion10.1016/j.ijsolstr.2009.10.023 ↗
20. Comparison of uniform and non-uniform corrosion induced damage in reinforced concrete based on a Gaussian description of the corrosion layer10.1016/j.corsci.2011.05.017 ↗
21. Non-uniform distribution of a corrosion layer at a steel/concrete interface described by a Gaussian model10.1016/j.corsci.2016.06.021 ↗
22. Influence of artificial cracks and interfacial defects on the corrosion behavior of steel in concrete during corrosion initiation under a chloride environment [J]10.1016/j.conbuildmat.2020.119165 ↗
23. Rust distribution and corrosion-induced cracking patterns of corner-located rebar in concrete cover10.1016/j.conbuildmat.2017.09.033 ↗
24. Crack shape and rust distribution in corrosion-induced cracking concrete10.1016/j.corsci.2011.11.002 ↗
25. Finite element modeling of concrete cover cracking due to non-uniform steel corrosion10.1016/j.engfracmech.2014.12.011 ↗
26. Development of simulation method of concrete cracking behavior and corrosion products movement due to rebar corrosion10.1016/j.conbuildmat.2018.09.100 ↗
27. Time to surface cracking and crack width of reinforced concrete structures under corrosion of multiple rebars10.1016/j.conbuildmat.2017.08.051 ↗
28. Modelling of concrete cover cracking due to non-uniform corrosion of reinforcing steel10.1016/j.conbuildmat.2017.08.082 ↗
29. Corner cracking model for non-uniform corrosion-caused deterioration of concrete covers10.1016/j.conbuildmat.2019.117410 ↗
30. A non-uniform corrosion model and meso-scale fracture modelling of concrete
31. Finite element modeling of concrete cover crack propagation due to non-uniform corrosion of reinforcement10.1016/j.conbuildmat.2016.12.019 ↗
32. Investigating the spatial development of corrosion of corner-located steel bar in concrete by X-ray computed tomography10.1016/j.conbuildmat.2019.06.023 ↗
33. Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive x-ray attenuation measurements10.1016/j.cemconres.2011.06.006 ↗
34. Corrosion induced cover cracking studied by X-ray computed tomography, nanoindentation, and energy dispersive X-ray spectrometry (EDS)10.1617/s11527-014-0292-9 ↗
35. Modeling damage in concrete caused by corrosion of reinforcement: coupled 3D FE model10.1007/s10704-012-9774-3 ↗
36. 3D finite element modelling of corrosion of lap splice joints in concrete
37. Crack patterns of concrete with a single rebar subjected to non-uniform and localized corrosion10.1016/j.conbuildmat.2016.04.149 ↗
38. The presentation of the chloride threshold level for corrosion of steel in concrete10.1016/S0010-938X(97)00009-7 ↗
39. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
40. Critical chloride content in reinforced concrete — a review10.1016/j.cemconres.2009.08.006 ↗
41. Chloride diffusion assessment in RC structures considering the stress-strain state effects and crack width influences10.1016/j.conbuildmat.2018.12.166 ↗
42. Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures10.1016/j.conbuildmat.2013.10.042 ↗
43. A model for predicting the relative chloride diffusion coefficient in unsaturated cementitious materials10.1016/j.cemconres.2018.10.013 ↗
44. A study of the effect of chloride binding on service life predictions
45. Numerical model for corrosion rate of steel reinforcement in cracked reinforced concrete structure10.1016/j.conbuildmat.2018.05.215 ↗
46. Modeling of chloride diffusivity coupled with non-linear binding capacity in sound and cracked concrete10.1016/j.cemconres.2009.07.014 ↗
47. Influence of traversing crack on chloride diffusion into concrete10.1016/j.cemconres.2007.10.007 ↗
48. Service life prediction of concrete wharves with early-aged crack: probabilistic approach for chloride diffusion10.1016/j.strusafe.2008.03.004 ↗
49. Numerical simulation of chloride-induced corrosion initiation in reinforced concrete structures with cracks10.1533/9780857099891.91 ↗
50. Analysis technique for chloride penetration in cracked concrete using equivalent diffusion and permeation10.1016/j.conbuildmat.2011.09.019 ↗
51. Corrosion characteristics of a 4-year naturally corroded reinforced concrete beam with load-induced transverse cracks10.1016/j.corsci.2017.01.002 ↗
52. Crack propagation and flexural behaviour of RC beams under simultaneous sustained loading and steel corrosion10.1016/j.conbuildmat.2017.05.193 ↗
53. Characteristics of concrete cracks and their influence on chloride penetration10.1016/j.conbuildmat.2016.01.002 ↗
54. Modelling of interaction between corrosion-induced concrete cover crack and steel corrosion rate10.1016/j.corsci.2012.11.028 ↗
55. A 2D mechano-chemical model for the simulation of reinforcement corrosion and concrete damage10.1016/j.conbuildmat.2017.01.103 ↗
56. Permeability and self-healing of cracked concrete as a function of temperature and crack width10.1016/S0008-8846(02)01099-2 ↗
57. Investigation on crack propagation of concrete cover induced by non-uniform corrosion of multiple rebars10.1016/j.engfracmech.2018.07.037 ↗
58. Development of a damage propagation analysis system based on level set XFEM using the cohesive zone model10.1016/j.compstruc.2015.10.005 ↗
59. Modelling of cohesive crack growth in concrete structures with the extended finite element method10.1016/j.cma.2007.03.023 ↗
60. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
61. Cohesive zone representations of failure between elastic or rigid solids and ductile solids10.1016/S0013-7944(03)00128-0 ↗
62. Corrosion products of reinforcing bars embedded in concrete
63. Analysis of crack propagation due to rebar corrosion using RBSM10.1016/j.cemconcomp.2011.06.001 ↗
64. The expansion coefficients and modulus of steel corrosion products
65. Hemorrhage detection in fundus image based on 2D Gaussian fitting and human visual characteristics10.1016/j.optlastec.2018.07.049 ↗
66. Influence of impressed current on the initiation of damage in reinforced mortar due to corrosion of embedded steel10.1016/j.cemconres.2007.08.022 ↗
67. Times to cracking in reinforced mortar beams subjected to accelerated corrosion tests
68. Coupled carbonation-rust formation-damage modeling and simulation of steel corrosion in 3D mesoscale reinforced concrete10.1016/j.cemconres.2015.04.008 ↗
69. Cracking of cover concrete due to non-uniform corrosion of corner rebar: a 3D meso-scale study10.1016/j.conbuildmat.2020.118449 ↗