Influence of prism geometry on the compressive strength of concrete masonry
Source abstract
Abstract
Abstract The compressive strength of concrete masonry depends on the dimensions of the test prisms. The available international masonry codes apply correction factors based on the height-to-thickness ratio to modify the strength obtained from different sizes of prisms. In this study, finite element models were developed to investigate the accuracy of this approach. Simplified micro-modeling method was used to simulate the behavior of masonry prisms which was verified against experimental results. A parametric study was then performed to examine the effect of key parameters on the compressive strength of masonry. The effect of the length-to-thickness ratio of masonry prisms was found to be significant on the compressive strength and should be considered together with the well understood effect of height-to-thickness ratio to calculate the correction factors. It was also shown that the current correction factors provided in the masonry codes lead to overestimating the strength of masonry prisms. New correction factors have been proposed accounting both the height-to-thickness and length-to-thickness ratio to reliably and safely estimate the compressive strength of masonry prisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. On the in-plane shear response of the high bond strength concrete masonry walls10.1617/s11527-017-1078-7 ↗
2. Compressive strength of masonry made of clay bricks and cement mortar: estimation based on neural networks and fuzzy logic10.1016/j.engstruct.2012.09.029 ↗
3. Experimental investigation of compressive failure in masonry brick assemblages made with soft brick10.1617/s11527-016-0926-1 ↗
4. A semi-random field finite element method to predict the maximum eccentric compressive load for masonry prisms10.1016/j.conbuildmat.2014.12.027 ↗
5. Prediction of masonry compressive behavior using a damage mechanics inspired modelling method10.1016/j.conbuildmat.2016.01.048 ↗
6. Uniaxial compressive strength and stiffness of field-extracted and laboratory-constructed masonry prisms10.1061/(ASCE)MT.1943-5533.0000731 ↗
7. Influence of blocks and grout on compressive strength and stiffness of concrete masonry prisms10.1016/j.conbuildmat.2018.06.091 ↗
8. Influence of joint thickness and mortar-block elastic properties on the strength and stresses developed in soil-cement block masonry10.1061/(ASCE)0899-1561(2009)21:10(535) ↗
9. Effects of joint thickness, adhesion and web shells to the face shell bedded concrete masonry loaded in compression10.7158/S12-035.2013.14.3 ↗
10. J. Wu, G. Bai, K. Kang, Y. Liu, P. Wang, S. Fu, Compressive strength and block-mortar bond of a new-type of insulation hollow block. IOP Conference series:Materials Science and Engineering, 2018,381:1-8.10.1088/1757-899X/381/1/012024 ↗
11. Relationship between the compressive strength of concrete masonry and the compressive strength of concrete masonry units10.1061/(ASCE)MT.1943-5533.0001204 ↗
12. Correlation between the performance of solid masonry prisms and wallettes under compression10.1016/j.jobe.2019.01.007 ↗
13. Estimation of compressive strength of hollow concrete masonry prisms using artificial neural networks and adaptive neuro-fuzzy inference systems10.1016/j.conbuildmat.2016.08.064 ↗
14. ASTM C42/C42M-13: Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete, ASTM International, West Conshohocken, 2013.
15. Effect of dimensions on the compressive strength of concrete masonry prisms10.1520/ACEM20150001 ↗
16. AS 4456.4: Methods of Determining Compressive Strength of Masonry Units, Standards Australia, Sydney, Australia, 2003.
17. ASTM C1314-18: Standard Test Method for Compressive Strength of Masonry Prisms, ASTM International, West Conshohocken, 2018.
18. CSA · 2014 · S304- · 14
19. Experimental determination of statistical parameters associated with uniaxial compression behavior of brick masonry10.18520/cs/v109/i11/2094-2102 ↗
20. The prediction of compressive strength of ungrouted hollow concrete block masonry10.1016/j.conbuildmat.2014.01.025 ↗
21. Size effect and strength correction factors for normal weight concrete specimens under uniaxial compression stress10.12988/ces.2013.13006 ↗
22. Das · 2013
23. S. Rizaee, M.D. Hagel, P. Kaheh, N. Shrive, Comparison of compressive strength of concrete block masonry prisms and solid concrete prisms. 2016.10.1201/b21889-228 ↗
24. Behavior and strength assessment of masonry prisms10.1016/j.cscm.2017.12.007 ↗
25. Mechanics of hollow concrete block masonry prisms under compression: review and prospects10.1016/j.cemconcomp.2006.11.003 ↗
26. Failure mechanism of masonry prism loaded in axial compression: computational aspects10.1007/BF02479350 ↗
27. On the compressive strength prediction for concrete masonry prisms10.1617/s11527-009-9492-0 ↗
28. Strengthening of masonry shear walls based on metal solutions. Part II: FE-model for the performance evaluation
29. Simulating masonry wall behavior using a simplified micro-model approach10.1016/j.engstruct.2017.08.021 ↗
30. A detailed micro-modelling approach for the structural analysis of masonry assemblages10.1016/j.compstruc.2018.06.003 ↗
31. Numerical and experimental evaluation of masonry prisms by finite element method10.1590/s1983-41952017000200010 ↗
32. A three-dimensional cyclic meso-scale numerical procedure for simulation of unreinforced masonry structures10.1016/j.compstruc.2013.01.012 ↗
33. Simplified micro modeling of partially grouted masonry assemblages10.1016/j.conbuildmat.2015.03.021 ↗
34. Stress-strain curves for unconfined and confined concrete masonry
35. Experimental and numerical analysis of the compressive and shear behavior for a new type of self-insulating concrete masonry system10.3390/app6090245 ↗
36. Diagonal compressive tests on double wythe brick ancient masonry panels unreinforced and reinforced with innovative cement based materials: advanced FE simulations
37. Hibbitt · 2016
38. Development of a detailed 3D FE model for analysis of the in-plane behavior of masonry infilled concrete frames10.1016/j.engstruct.2017.04.049 ↗
39. Chen · 2007
40. Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS10.1016/j.engstruct.2015.04.016 ↗
41. Q. Chen, B. Andrawes, 3D finite element modeling to study the behavior of shape memory alloy confined concrete, in: Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September, 2012.
42. Non-associated plasticity for soils, concrete and rock
43. Enhancement of lateral in-plane capacity of partially grouted concrete masonry shear walls10.1016/j.engstruct.2015.11.017 ↗
44. J. Dauda, O. Iuorio, L. Paulo, Characterization of brick masonry: study towards retrofitting URM walls with timber-panels, in: 10th International Masonry Conference (10thIMC) IMC, 2018.
45. R. Sousa, H. Sousa, Numerical simulations of masonry laboratory tests: A sensitivity analysis of the compressive behaviour, in: Proceedings of the 15th International Brick and Block Masonry Conference, Florianopolis, Brazil, 2012.
46. New methodology for calculating damage variables evolution in Plastic Damage Model for RC structures10.1016/j.engstruct.2016.11.022 ↗
47. Nonlinear FE modeling of reinforced concrete
48. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
49. Behavior of concrete under biaxial stresses
50. Jirasek · 2001
51. Finite element modeling of push-out tests for large stud shear connectors10.1016/j.jcsr.2009.06.010 ↗
52. A plastic-damage concrete model for earthquake analysis of dams10.1002/(SICI)1096-9845(199809)27:9<937::AID-EQE764>3.0.CO;2-5 ↗
53. S. Michał, W. Andrzej, Calibration of the CDP model parameters in Abaqus, in: The 2015 World Congress on Advanced in Structural Engineering and Mechanics, 2015.
54. J. Lee, Theory and implementation of plastic-damage model for concrete structures under cyclic and dynamic loading, Ph.D. Thesis, University of California, Berkeley, USA, 1997.
55. Finite element analysis of reinforced concrete beam-column connections with governing joint shear failure mode10.1590/1679-78253682 ↗
56. Hassanli · 2015