Effect of the correlation of steel corrosion in the transverse direction between tensile rebars on the structural performance of RC beams
Source abstract
Abstract
Abstract Reinforcement corrosion is highly nonuniform and spatially distributed in reinforced concrete (RC) structures. Since RC members are reinforced with multiple rebars, corrosion of one rebar might affect another rebar in the transverse direction, thereby influencing the behavior of the structure. Hence, greater attention should be paid to studying the effects of the correlation of localized corrosion between adjacent rebars on the structural performance of RC members. In this paper, the effects of localized corrosion and the correlation of steel corrosion between tensile rebars on the structural performance of corroded RC beams were investigated through experiments and finite element (FE) analyses. The experimental results indicated that compared to the RC beams corroded over their entire length, the partially corroded RC beams with highly localized steel corrosion in the mid-span experienced large reductions in both loading capacity and ultimate deflection. Moreover, for beams with multiple rebars, the results showed that the beams with higher correlation coefficients of cross-sectional area loss between rebars had lower load and deflection capacities than the beams with lower correlation coefficients. The load–deflection responses of the beams with multiple rebars simulated by the 3D FE model were found to be in better agreement with the experimental results than those of the 2D FE model. Furthermore, a Monte Carlo simulation (MCS) was performed using a 3D FE model for two different cases: correlated and uncorrelated steel corrosion in the transverse direction of the RC beam. The results showed that a stronger correlation of steel cross-sectional area loss on different tensile rebars led to a larger variation in the load capacities of the corroded RC beams.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Reliability-based durability design and service life assessment of reinforced concrete deck slab of jetty structures10.1080/15732479.2016.1164725 ↗
2. Toward life-cycle reliability-, risk- and resilience-based design and assessment of bridges and bridge networks under independent and interacting hazards: emphasis on earthquake, tsunami and corrosion10.1080/15732479.2019.1604770 ↗
3. ASCE · 2013 · 2013
4. The cost of corrosion in China
5. Flexural strength of concrete beams with corroding reinforcement
6. The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment10.1016/j.cemconres.2009.07.025 ↗
7. Distribution of corrosion and pitting factor of steel in corroded RC beams10.1016/j.conbuildmat.2015.07.119 ↗
8. Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam10.1016/j.conbuildmat.2013.11.015 ↗
9. Influence of Corrosion on the Structural Stiffness of Reinforced Concrete Beams10.5006/1.3287868 ↗
10. Effect of non-uniform rebar corrosion on structural performance of RC structures: A numerical and experimental investigation
11. Effect of bond and corrosion within partial length on shear behaviour and load capacity of RC beam10.1016/j.conbuildmat.2010.11.081 ↗
12. Performance of RC columns with partial length corrosion10.1016/j.nucengdes.2008.08.007 ↗
13. Mechanical behaviour of corroded reinforced concrete beams—Part 1: Experimental study of corroded beams10.1007/BF02480533 ↗
14. Residual flexure capacity of corroded reinforced concrete beams10.1016/j.engstruct.2006.07.018 ↗
15. Long-term performance of corrosion-damaged reinforced concrete beams
16. Variation of steel loss and its effect on the ultimate flexural capacity of RC beams corroded and repaired under load10.1016/j.conbuildmat.2009.11.012 ↗
17. Experimental investigation of the spatial variability of the steel weight loss and corrosion cracking of reinforced concrete members: novel X-ray and digital image processing techniques10.1080/15732479.2016.1198397 ↗
18. Reliability estimation of corroded RC structures based on spatial variability using experimental evidence, probabilistic analysis and finite element method10.1016/j.engstruct.2019.04.085 ↗
19. Assessment of the structural performance of corrosion-affected RC members based on experimental study and probabilistic modeling10.1016/j.engstruct.2016.08.040 ↗
20. Impact of reinforcement corrosion on ductile behavior of reinforced concrete beams
21. Spatial variability of pitting corrosion and its influence on structural fragility and reliability of RC beams in flexure10.1016/j.strusafe.2004.03.002 ↗
22. Residual capacity of corroded reinforced concrete bridge components: State-of-the-art review10.1061/(ASCE)BE.1943-5592.0001429 ↗
23. Pitting corrosion of reinforcing steel bars in chloride contaminated concrete10.1016/j.conbuildmat.2018.12.003 ↗
24. Probabilistic model of the minimum effective cross-section area of non-uniform corroded steel bars10.1016/j.conbuildmat.2019.05.012 ↗
25. M. Zhang, S. Lim, M. Akiyama, D.M. Frangopol, Modeling spatial variability of steel corrosion using Gumbel distribution, in: 13th Int. Conf. Appl. Stat. Probab. Civ. Eng., Seoul, South Korea, 2019.
26. M.M. Kioumarsi, M.A.N. Hendriks, M. Geiker, Interference of localised corrosion on adjacent reinforcement bars of a beam in bending, in: Concr. Innov. Conf., Oslo, Norway, 2014.
27. Effect of pit distance on failure probability of a corroded RC beam10.1016/j.proeng.2017.01.365 ↗
28. The effect of interference of corrosion pits on the failure probability of a reinforced concrete beam10.1016/j.engstruct.2016.01.058 ↗
29. T. Yamamoto, K. Kobayashi, Report of research project on structural performance of deteriorated concrete structures by JSCE 331--review of experimental study, in: Proc. Int. Work. Life Cycle Manag. Coast. Concr. Struct., Nagaoka, Japan, 2006, pp. 171–180.
30. Factors controlling cracking of concrete affected by reinforcement corrosion10.1007/BF02480466 ↗
31. The effect of chloride-induced corrosion on mechanical properties of reinforcing bar10.3151/crt1990.19.3_31 ↗
32. Note on regression and inheritance in the case of two parents, in
33. Corrosion-induced cover spalling and anchorage capacity10.1080/15732479.2014.979836 ↗
34. User’s Manual, Version 10.3, TNO DIANA BV, Delft
35. Tensile and tensile fatigue behaviour of concrete; experiments, modelling and analyses
36. Rots · 1988
37. CEB-FIP Model Code 2010 – Final Draft, volume 1, Bulletin 65, 2012, 350 pp.
38. Structural assessment of corroded reinforced concrete beams: modeling guidelines10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗
39. Consequences of steel corrosion on the ductility properties of reinforcement bar10.1016/j.conbuildmat.2007.10.006 ↗
40. Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams10.1617/s11527-012-9941-z ↗
41. Mechanical response of corroded steel reinforcement of abandoned concrete bridge
42. Mechanical performance of corroded steel bars in concrete10.1680/stbu.11.00048 ↗
43. Finite element investigation of the structural response of corroded RC beams10.1016/j.engstruct.2010.05.017 ↗
44. E. Vanmarcke, Random fields: analysis and synthesis, World Scientific Publishing Co Inc, 2010.10.1142/5807 ↗
45. Modified linear estimation method for generating multi-dimensional multi-variate Gaussian field in modelling material properties10.1016/j.probengmech.2014.09.001 ↗
46. Generation of multivariate cross-correlated geotechnical random fields10.1016/j.compgeo.2017.01.006 ↗
47. Multivariate distribution models with prescribed marginals and covariances10.1016/0266-8920(86)90033-0 ↗