Effects of elevated temperatures on strength and microstructure of mortar containing nano-calcined montmorillonite clay
Source abstract
Abstract
Abstract This study focuses on the residual mechanical strengths and microstructure of nano-calcined montmorillonite clay (NCMC) cement mortars at high temperatures. NCMC was prepared via thermal activation of nano-clay, and the produced mortars with 0%, 1%, 3%, and 5 wt% NCMC replacements were subjected to temperatures of up to 900 °C. The fire-resistance properties of the produced mortars and their role were analysed through thermogravimetric analysis, X-ray diffraction, and scanning electron microscopy. The results revealed that the use of thermally treated NCMC reduced the density and widths of microcracks, improved the mass-loss behaviour, reduced the amount of calcium hydroxide crystals, and strengthened the matrix, which explains their higher residual mechanical strengths.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete and Cement Materials Research · Engineering and Material Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. ACI-318S, Building Code Requirements for Structural Concrete (ACI 318S-14) and Commentary (ACI 318SR-14), 2014.
2. European Committee for Standardization, EN, 1992-1-2: design of concrete structures. Part 1-2: general rules—structural fire design, Brussels, Belgium, 2004.
3. Joint ACI/TMS Comm 216, 216.1-14, Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies, American Concrete Institute, Farmington Hills, MI, 2019.
4. Residual strength and degradation of cement mortar containing polypropylene fibers at elevated temperature10.1088/1757-899X/737/1/012065 ↗
5. Properties of concrete at elevated temperatures10.1155/2014/468510 ↗
6. Effects of elevated temperatures on properties of concrete10.1016/j.firesaf.2007.01.003 ↗
7. T.D.L. Wei-Ming Lin and L. J. Powers-Couche, Microstructures of Fire-Damaged Concrete, ACI Mater. J. 93 (n.d.). DOI:10.14359/9803.10.14359/9803 ↗
8. Concrete strength for fire safety design10.1680/macr.2005.57.8.445 ↗
9. An investigation on blast-furnace stag as fine aggregate in alkali-activated slag mortars subjected to elevated temperatures10.1016/j.jclepro.2015.07.127 ↗
10. An investigation of high-volume fly ash concrete blended with slag subjected to elevated temperatures10.1016/j.jclepro.2015.01.031 ↗
11. Strength and microstructure of mortar containing nanosilica at high temperature
12. Relationship between splitting tensile and compressive strengths for self-compacting concrete containing nano- and micro silica10.1051/matecconf/201816202013 ↗
13. Characterization of high strength mortars with nano Titania at elevated temperatures10.1016/j.conbuildmat.2013.02.044 ↗
14. Humidity effect on the photocatalytic activity of sustainable cement-based composites10.2174/1874149501812010383 ↗
15. Characterization of high strength mortars with nano alumina at elevated temperatures10.1016/j.cemconres.2013.08.003 ↗
16. Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars10.1016/j.cemconres.2013.03.005 ↗
17. Cement substitution by a combination of metakaolin and limestone10.1016/j.cemconres.2012.09.006 ↗
18. Effects of organo-modified montmorillonite on strengths and permeability of cement mortars10.1016/j.cemconres.2005.11.013 ↗
19. The effects of nano-calcined kaolinite clay on cement mortar exposed to acid deposits10.1016/j.conbuildmat.2015.11.016 ↗
20. Thermal performance and fire resistance of nanoclay modified cementitious materials10.1016/j.conbuildmat.2017.10.127 ↗
21. Pozzolanic reactivity of pure calcined clays10.1016/j.clay.2016.08.003 ↗
22. Supplementary cementitious materials: new sources, characterization, and performance insights10.1016/j.cemconres.2019.05.008 ↗
23. Compressive strength and thermal conductivity of concrete with nanoclay under Various High-Temperatures10.1016/j.conbuildmat.2017.04.141 ↗
24. Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures10.1016/j.conbuildmat.2012.04.099 ↗
25. Mechanical properties and chemical characterization of mortars with halloysite nanoclay after exposure to elevated temperatures10.1520/ACEM20190028 ↗
26. ASTM-C150, Standard Specification for Portland Cement, Annu. B. ASTM Stand. (2015) 1–8. DOI:10.1520/C0150.10.1520/C0150 ↗
27. ASTM C778-13, Standard Specification for Sand, 65.198.187.10. 14 (2014) 1–3. DOI:10.1520/C0778-13.2.
28. Effects of nano and micro size of clay particles on the compressive and tensile strength properties of self-consolidating concrete10.1051/matecconf/201816202030 ↗
29. Characterisation of calcined raw clays suitable as supplementary cementitious materials10.1016/j.clay.2018.06.030 ↗
30. Pozzolanic reactivity of a calcined interstratified illite/smectite (70/30) clay10.1016/j.cemconres.2015.08.006 ↗
31. The origin of the pozzolanic activity of calcined clay minerals: a comparison between kaolinite, illite and montmorillonite10.1016/j.cemconres.2010.09.013 ↗
32. ASTM C109, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in . or [ 50-mm ] Cube Specimens) 1, Chem. Anal. (2010) 1–9. DOI:10.1520/C0109.
33. Experimental study of mechanical properties of normal-strength concrete exposed to high temperatures at an early age10.1016/j.firesaf.2009.06.007 ↗
34. Effect of elevated temperature on physico-mechanical properties of blended cement concrete10.1016/j.conbuildmat.2010.06.078 ↗
35. Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures10.1016/j.cemconres.2011.06.012 ↗
36. Preparation of flat-polished specimens for SEM-backscattered electron imaging and X-ray microanalysis—importance of epoxy impregnation10.1016/S0008-8846(02)01029-3 ↗
37. Use of ceramic-waste powder as value-added pozzolanic material with improved thermal properties10.1061/(ASCE)MT.1943-5533.0003326 ↗
38. Mehta · 2006
39. Study on temperature stresses in concrete box girders due to heat of concrete hydration10.4028/www.scientific.net/AMR.243-249.1651 ↗
40. Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature10.1016/j.cemconcomp.2018.11.009 ↗
41. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
42. Improvement of initial mechanical strength by nanoalumina in belite cements10.1016/j.matlet.2006.07.150 ↗
43. Taylor · 1997
44. Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysis10.1016/j.cemconcomp.2017.07.009 ↗
45. Applicability of the standard specifications of ASTM C618 for evaluation of natural pozzolans10.1016/j.cemconcomp.2010.08.007 ↗
46. Impact of high temperature on residual properties of concrete with steel slag aggregate10.1061/(ASCE)MT.1943-5533.0001515 ↗
47. Development of a high-temperature-resistant mortar by using slag and pumice10.1016/j.firesaf.2008.02.001 ↗
48. Adequacy of the ASTM C1240 specifications for nanosilica pozzolans10.2174/1874149501913010042 ↗
49. Phase development in normal and ultra high performance cementitious systems by quantitative X-ray analysis and thermoanalytical methods10.1016/j.cemconres.2008.11.003 ↗