Characterization and evaluation of morphological features for aggregate in asphalt mixture: A review
Source abstract
Abstract
Abstract The objective of this paper is to review the current characterization and evaluation methods and introduce emerging technologies of aggregate morphologies in asphalt mixture through conventional tests and imaging techniques that would be possibly applied to analyze and evaluate the morphological features of particles. The current evaluating-characterizing method is defined as a procedure that has been shown by experience or research to obtain satisfying results, that is established or proposed as a standard suitable for general application. This review first identified the methods based on laboratory tests to characterize and evaluate the morphologies of the aggregate particle. Then, an attempt was made to study the existing methodologies from different points of view, accompanied by extensive comparisons on three categories of imaging techniques-early imaging techniques, dynamic imaging techniques, and static imaging techniques to facilitate further research studies. Additionally, the evaluation parameters of aggregate morphologies based on image technologies were represented. Finally, a comparative evaluation between different conventional testing methods and different imaging techniques through basic tools, application conditions, advantages, and disadvantages were conducted. This review concluded with some recommendations and conclusions in terms of morphological characterization and evaluation of aggregates in the asphalt mixture to materials selection during the mixture design and construction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Mineral Processing and Grinding
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Quality, shape and degradation of aggregates10.1144/GSL.QJEG.1975.008.03.03 ↗
2. Correlation between shape of aggregate and mechanical properties of asphalt concrete digital image processing approach
3. An automated image analysis procedure to evaluate compacted asphalt sections10.1080/10298430801916866 ↗
4. Aggregate structure characterisation of asphalt mixtures using two-dimensional image analysis10.1080/14680629.2012.711923 ↗
5. Effects of coarse aggregate angularity and asphalt binder on laboratory-measured permanent deformation properties of HMA10.1080/10298430802068915 ↗
6. Image analysis evaluation of aggregates for asphalt concrete mixtures
7. Impact of particle morphology on aggregate-asphalt interface behavior10.1016/j.conbuildmat.2016.11.132 ↗
8. Effect of aggregate shape properties and binder’s adhesiveness to aggregate on results of compression and tension/compression tests on hot mix asphalt10.1617/s11527-020-01472-1 ↗
9. Aggregate–binder adhesiveness assessment and investigation of the influence of morphological and physico-chemical properties of mineral aggregates10.1080/14680629.2019.1588773 ↗
10. Understanding influence of crushers on shape characteristics of fine aggregates based on digital image and conventional techniques10.1016/j.conbuildmat.2017.06.058 ↗
11. Determination of fine aggregate angularity in relation with the resistance to rutting of hot-mix asphalt10.1016/j.conbuildmat.2004.05.004 ↗
12. W. Sun, Quantification of morphological characteristics of aggregates at multiple scales, 2015, Virginia Tech.
13. NCHRP Report 555 Test methods for characterizing aggregate shape, texture, and angularity
14. Mineral aggregate morphological evaluation with MATLAB Fourier radial gradient transform analysis10.1520/JTE20160141 ↗
15. Particle shape: a review and new methods of characterization and classification10.1111/j.1365-3091.2007.00892.x ↗
16. 3D quantitative shape analysis on form, roundness, and compactness with μCT10.1016/j.powtec.2015.12.029 ↗
17. Determining aggregate size and shape effect on concrete microcracking under compression by means of a degree of reversibility method10.1016/j.conbuildmat.2017.03.128 ↗
18. L. Gates, et al., FHWA-HIF-11-030 Aggregate Image Measurement System 2 (AIMS2): Final Report. 2011, Highways for LIFE Program Office, FHWA, Pine Instrument Company
19. Lab assessment and discrete element modeling of asphalt mixture during compaction with elongated and flat coarse aggregates10.1016/j.conbuildmat.2018.06.059 ↗
20. Using discrete element models to track movement of coarse aggregates during compaction of asphalt mixture10.1016/j.conbuildmat.2018.08.133 ↗
21. Characterization of particle movement in Superpave gyratory compactor at meso-scale using SmartRock sensors10.1016/j.conbuildmat.2018.04.146 ↗
22. X. Wang, et al., Towards smart compaction: Particle movement characteristics from laboratory to the field. 2019. 218: p. 323-33210.1016/j.conbuildmat.2019.05.122 ↗
23. Influence of angularity and roughness of coarse aggregates on asphalt mixture performance10.1016/j.conbuildmat.2018.12.176 ↗
24. ASTM C1252-17 Standard test methods for uncompacted void content of fine aggregate (as influenced by particle shape, surface texture, and grading), in American Society for Testing and Materials 2017
25. AASHTO T304 Uncompacted void content of fine aggregate. American Association of State Highway and Transportation Officials, 2015
26. Review of fine aggregate angularity requirements in superpave
27. A. Chowdhury, J.W. Button, Fine aggregate angularity: conventional and unconventional approach, in Aggregate Contribution to Hot Mix Asphalt (HMA) Performance. 2001, ASTM International.10.1520/STP10805S ↗
28. ASTM D3398 Standard test method for index of aggregate particle shape and texture, in American Society for Testing and Materials 2010.
29. AASHTO T326 Standard method of test for uncompacted void content of coarse aggregate (as influenced by particle shape, surface texture, and grading), in American Association of State Highway and Transportation Officials, 2013
30. FHWA/IN/JTRP98/20 Effect of fine aggregate angularity on asphalt mixture performance. Joint Transportation Research Program, 1999
31. FHWA/IN/JTRP98/20 Indiana test method No. 201-89. Joint Transportation Research Program, 1999
32. E. Tons, W.H. Goetz, Packing volume concepts for aggregates. Transportation Research Board, National Research Council, Washington D.C., 1968: p. 79-96.10.5703/1288284314483 ↗
33. ASTM D3080 Standard test method for direct shear test of soils under consolidated drained conditions, in American Society for Testing and Materials 2018.
34. ASTM C117 Standard test method for materials finer than 75-μm (No. 200) sieve in mineral aggregates by washing, in American Society for Testing and Materials 2003.
35. ASTM D4791-10 Standard test method for flat particles, elongated particles, or flat and elongated particles in coarse aggregate, in American Society for Testing and Materials 2010
36. Measuring skid resistance of hot mix asphalt using the aggregate image measurement system (AIMS)10.1016/j.conbuildmat.2015.08.117 ↗
37. E.A. Masad, Report No. FHWA/TX-05/5-1707-01-1 aggregate imaging system (AIMS) basics and application. Texas Transportation Institute, Texas A&M University System, College Station, TX, 2005, 2005
38. Measurement of aggregate texture and its influence on hot mix asphalt (HMA) permanent deformation
39. J. Gudimettla, L.A. Myers, C. Paugh, AIMS: the future in rapid, automated aggregated shape and texture measurement, in: Proceedings of the annual conference-canadian technical asphalt association. 2006. Polyscience Publications; 1998.
40. X-ray computed tomography and aggregate image system (AIMS) for studying hot mix asphalt and aggregates
41. Pan · 2006
42. Ministry of Transport, the People's Republic of China, JTG E42-2005 Test methods of aggregate for highway engineering. 2005.
43. ASTM C29 Standard test method for bulk density (“unit weight”) and voids in aggregate, in American Society for Testing and Materials 2017.
44. ASTM D2488-06 Standard practice for description and identification of soils (visual-manual procedure) in American Society for Testing and Materials 2008
45. V. Janoo, Quantification of shape, angularity, and surface texture of base course materials. 1998, Cold regions research and engineering laboratory.
46. ASTM C131 Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the los angeles machine, in American Society for Testing and Materials 2014.
47. The development of coral concretes and their upgrading technologies: a critical review10.1016/j.conbuildmat.2018.07.202 ↗
48. The effects of carbonation conditions on the physical and microstructural properties of recycled concrete coarse aggregates10.1016/j.conbuildmat.2020.119486 ↗
49. Coral aggregate concrete: numerical description of physical, chemical and morphological properties of coral aggregate10.1016/j.cemconcomp.2019.03.016 ↗
50. Review of remote sensing methodologies for pavement management and assessment10.1007/s12544-015-0156-6 ↗
51. Fragmentary shape recognition: A BCI study10.1016/j.cad.2015.10.001 ↗
52. E. Masad, Review of imaging techniques for characterizing the shape of aggregates used in asphalt mixes. in International Center for Aggregates Research 9th Annual Symposium: Aggregates-Concrete, Bases and FinesInternational Center for Aggregates Research (ICAR); University of Texas at Austin; Texas A&M University System; Aggregates Foundation for Technology, Research & Education (AFTRE); National Stone, Sand & Gravel Association (NSSGA); Florida Rock Industries. 2001.
53. E. Masad, NCHRP Report 555 Test methods for characterizing aggregate shape, texture, and angularity. 2007, Transportation Research Board.
54. Image based techniques for crack detection, classification and quantification in asphalt pavement: a review10.1007/s11831-016-9194-z ↗
55. F.M. Nejad, H. Zakeri, The hybrid method and its application to smart pavement management. Metaheuristics Water Geotech Transp Eng. Vol. 439. 2012.10.1016/B978-0-12-398296-4.00019-2 ↗
56. Effect of coarse aggregate morphology on permanent deformation behavior of hot mix asphalt10.1061/(ASCE)0733-947X(2006)132:7(580) ↗
57. Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials10.1061/(ASCE)0899-1561(2008)20:9(617) ↗
58. F. Gong, Digitalized Classification of Coarse Aggregate in Asphalt Mixture and Its Application, in School of Highway. 2019, Chang'an University.
59. 3D shape quantification and random packing simulation of rock aggregates using photogrammetry-based reconstruction and discrete element method10.1016/j.conbuildmat.2020.119986 ↗
60. T.M. Al Rousan, Characterization of aggregate shape properties using a computer automated system. 2005, Texas A&M University.
61. E. Masad, et al., Appendixes to NCHRP Report 555 Test methods for characterizing aggregate shape, texture, and angularity, 2005
62. Evaluation of different digital image processing software for aggregates and hot mix asphalt characterizations10.1016/j.conbuildmat.2012.07.051 ↗
63. Comparison of 2D and 3D image-based aggregate morphological indices10.1080/10298436.2011.575137 ↗
64. Evaluation of aggregate imaging techniques for quantification of morphological characteristics10.3141/2335-05 ↗
65. Use of advanced aggregate imaging systems to evaluate aggregate resistance to breakage, abrasion, and polishing10.3141/2401-01 ↗
66. Comparison of shape parameters for selected coarse aggregates in Oklahoma10.1520/JTE104455 ↗
67. New methodology for shape classification of aggregates10.1177/0361198105191300102 ↗
68. Investigation on effects of different crushing stages on morphology of coarse and fine aggregates10.1080/10298436.2018.1449951 ↗
69. An improved image processing technique for asphalt concrete X-ray CT images10.1080/14680629.2013.794370 ↗
70. Portable image analysis system for characterizing aggregate morphology10.3141/2104-01 ↗
71. Unified method to quantify aggregate shape angularity and texture using Fourier analysis10.1061/(ASCE)0899-1561(2005)17:5(498) ↗
72. Image analysis technique for aggregate morphology analysis with two-dimensional Fourier transform method10.3141/2267-01 ↗
73. Aggregate morphological characterization with 3D optical scanner versus X-ray computed tomography10.1061/(ASCE)MT.1943-5533.0002091 ↗
74. Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: Application to aggregates used in concrete10.1016/S0008-8846(02)00836-0 ↗
75. 3D Quantification for aggregate morphology using surface discretization based on solid modeling10.1061/(ASCE)MT.1943-5533.0002766 ↗
76. S.T. Erdogan, D.W. Fowler, Determination of aggregate shape properties using X-ray tomographic methods and the effect of shape on concrete rheology. 2005.
77. A Matlab program for fourier analysis and evaluation on mineral aggregate morphological features
78. 3D characterisation of the grain sphericity and angularity with the aid of computed tomography10.37544/0005-6650-2015-09-64 ↗
79. On the characterization of size and shape of irregular particles10.1016/j.powtec.2014.10.015 ↗
80. Aggregate shape characterization using virtual measurement of three-dimensional solid models constructed from X-Ray CT images of aggregates10.1061/(ASCE)MT.1943-5533.0002210 ↗
81. 3D characterization of general-shape sand particles using microfocus X-ray computed tomography and spherical harmonic functions, and particle regeneration using multivariate random vector10.1016/j.powtec.2017.09.030 ↗
82. Effects of coarse aggregate angularity on the microstructure of asphalt mixture10.1016/j.conbuildmat.2018.06.170 ↗
83. Shear behaviors of granular mixtures of gravel-shaped coarse and spherical fine particles investigated via discrete element method10.1016/j.powtec.2019.05.016 ↗
84. L. Gates, et al., Aggregate Image Measurement System 2 (AIMS2), in Technical report, Federal Highway Administration, 2011, US Department of Transportation.
85. M. Bathina, Quality analysis of the aggregate imaging system (AIMS), Texas A&M University, 2005.
86. Quantification of aggregate morphologic characteristics as related to mechanical properties of asphalt concrete with improved FTI system10.1061/(ASCE)MT.1943-5533.0001535 ↗
87. Analysis of aggregate shape characteristics and its relationship to hot mix asphalt performance10.1080/14680629.2007.9690077 ↗
88. Quantification of aggregate morphologic characteristics with the correlation to uncompacted void content of coarse aggregates in Virginia10.1016/j.conbuildmat.2016.06.150 ↗
89. Aggregate production: fines generation during rock crushing10.1016/j.minpro.2006.08.004 ↗
90. 3D generation of realistic granular samples based on random fields theory and Fourier shape descriptors10.1016/j.cma.2014.06.022 ↗
91. Effects of particle characteristics of lightweight aggregate on mechanical properties of lightweight aggregate concrete10.1016/j.conbuildmat.2014.07.043 ↗
92. Automated Intelligent real-time system for aggregate classification10.1016/j.minpro.2011.04.009 ↗
93. Machine vision based characterization of particle shape and asphalt coating in Reclaimed Asphalt Pavement10.1016/j.trgeo.2016.01.001 ↗
94. Quantitative analysis of aggregate based on hough transform10.1177/0361198196153000114 ↗
95. Fine-aggregate angularity: automated image analysis approach10.3141/1721-08 ↗
96. Imaging indices for quantification of shape, angularity, and surface texture of aggregates10.3141/1721-07 ↗
97. Evaluation of visual based aggregate shape classifications using the University of Illinois Aggregate Image Analyzer (UIAIA)
98. P.V. Hough, Method and means for recognizing complex patterns, 1962, Google Patents
99. Technical and computational aspects of the measurement of aggregate shape by digital image analysis10.1061/(ASCE)0887-3801(2004)18:1(10) ↗
100. Evaluation of granular particle roundness using digital image processing and computational geometry10.1016/j.conbuildmat.2018.03.246 ↗